• Korean Institute of Interior Design Journal
• /
• v.15 no.4 s.57
• /
• pp.81-88
• /
• 2006

The form and function of modern museum present more a variety of aspects in need of transition of the mature civil society and culture than the past. Considering that an art museum is the space where a multitude of unspecified visitors inspect simultaneously, exhibitions and adequate construction make visitors lead to successively visual contact. Consequently a goal of this study is to analyze that there is correlation between exhibit space and exhibitions and to suggest an alternative plan at exhibition through relationship among exhibitions, exhibit space and spectators' behavior. Two Art galleries (one is a large-sized gallery and the other is a small-sized one) located in Pyung-Chang dong were selected to analyze the correlation and suggest the better display for the exhibition. The finding of the study is following. The exhibit space which spectators recognize is assumed diverse forms by an unique characteristics of exhibits and space and an arrangement of exhibitions and the path of flow of spectator who walking ahead have an huge effect on a spectators' behavior. In other words, spectators' watching patterns are affected by display of exhibitions and the path of flow. That is to say, the spectators' behavior and the concentration to watch exhibitions is decided by the exhibit form in the museum, and the quality of watching experience is depended on the spectators' relevant knowledge prior to exhibitions.

• Journal of Korea Foundry Society
• /
• v.37 no.4
• /
• pp.115-122
• /
• 2017

The aim of this research is to evaluate the wear properties of (TiB+TiC) paticulate reinforced titanium matrix composites (TMCs) by in-situ synthesis. Different particle sizes (1500, $150{\mu}m$) and contents (0.94, 1.88 and 3.76 mass% for Ti, 1.98 and 3.96 mass% for the Ti6Al4V alloy) of boron carbide were added to pure titanium and to a Ti6Al4V alloy matrix during vacuum induction melting to provide 5, 10 and 20 vol.% (TiB+TiC) particulate reinforcement amounts. The wear behavior of the (TiB+TiC) particulate reinforced TMCs is described in detail with regard to the coefficient of friction, the hardness, and the degree of reinforcement fragmentation during sliding wear. The worn surfaces of each sliding wear condition are shown for the three types of wear studied here: transfer layer wear, particle cohesion wear and the development of abrasive areas. The fine reinforcements of TMCs were easily fragmented from the Ti matrix as compared to coarse reinforcements, and fragmented debris accelerated the decrease in the wear resistance.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.162-171
• /
• 2012

In this study, a new dynamic interaction analysis method for tilting trains and curved track is presented. Three dimensional lumped parameter vehicle elements are used to model tilting train, and the proposed analysis technique can simulate driving direction change of vehicle, the effect of track cant, wheel-rail contact angle, and tilting angle of tilting trains, etc. The proposed method passed several basic verification tests, and it is expected that the suggested method is applicable for practical problems.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.55-59
• /
• 2003

This work is focused on analyzing ion-pair interactions and showing the effect of solvent induced inter-atomic attractions in various dielectric environments. To estimate the stability of ion-pairs, SCI-PCM ab initio MO calculations were carried out. We show that the solvent-induced attraction or ‘cavitation' energy of the ion-pair interactions in solution that arises mainly from the stabilization of the water molecules by the generation of an electrostatic field. In fact, even the strong electrostatic interaction characteristic of ion-pair interactions in the gas phase cannot overcome the destabilization or reorganization of the water molecules around solute cavities that arise from cancellation of the electrostatic field. The solvent environment, possibly supplemented by some specific solvent molecules, may help place the solute molecule in a cavity whose surroundings are characterized by an infinite polarizable dielectric medium. This behavior suggests that hydrophobic residues at a protein surface could easily contact the side chains of other nearby residues through the solvent environment, instead of by direct intra-molecular interactions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.47-54
• /
• 1981

Dental porcelains are widely used for restorative material because of its excellent esthetic property. But according to contact with natural teeth or metal in oral cavity, the porcelain may be worn and may effect on masticatory physiology and prosthetic function. The purpose of this experiment was to study on wear of porcelain surface which treated in different method. Using the abrasion device which was designed and constructed by myself, the different porcelain surface were abraded by gold alloy, nickel-chrome alloy and natural teeth in order to compare roughness. Results were as follows. 1. The group of porcelain abraded by gold alloy showed less surface roughness change (t=2.92, p<0.05), and the group of porcelain abraded by natural teeth had high surface roughness. change (t=6.84, p<0.05). 2. According to the method of surface treatment, the surface roughness were very significant (F=9.12, p<0.05). 3. After abrading, the porcelain surface roughness change was very significant (F=54.49, p<0.05). 4. There was no significant between surface treatment method and the kind of abrading materials. (F=1.01, p>0..05). 5. The group of natural glazing had the most smooth surface ($2.1{\pm}1.13{\mu}m$).

• Journal of Families and Better Life
• /
• v.32 no.4
• /
• pp.1-22
• /
• 2014

This study was focused on investigating the factors of the psychological adaptation of grandmothers raising their grandchildren. The Double ABCX family stress model provided the theoretical basis for this study, and the major factors examined in the study included a pile-up of stressors, family resources and social support, appraisal of situation(redefinition of nurturing), and adaptation(depressive mood and happiness). Data were collected by personal interview with 213 grandmothers raising their grandchildren utilizing the questionnaire survey method. Structural equation modeling analyses were performed and the results showed that a pile-up of stressors, the family resources(i.e., contact and emotional solidarity with grandchildren's parents), and the redefinition of nurturing had significant influences on the psychological adaptation of grandmothers raising their grandchildren. It was also found that social support had indirect influence on grandmothers' psychological adaptation. The redefinition of nurturing had the greatest effect on the participants' psychological adaptation, followed by a pile-up stressor, and then the family resources.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.65-69
• /
• 2010

This paper presented an experimental study of slip resistance characteristics of shoes and floor surface contact with special focus on the effect of surface roughness, outsole material and mechanical abrasion. The factors that affected the results of slip resistances were investigated for four kinds of rubbers and five kinds of floor samples using the VIT(English XL) tribometer. The slip resistance was observed to increase gradually with increasing roughness for five kinds of floor roughness. In the higher surface roughness (larger than $11.5{\mu}m$), the slip resistance increased more rapidly and exceeded safety criteria at $22.60{\mu}m$. The slip resistance was observed to decrease with increasing hardness of outsole, except for butylenes rubber, which seemed to show the material property. The slip resistance decreased with number of trials. In the first several times(5 or 6 trial), the slip resistance decreased more rapidly, whereafter it approached gradually constant value. The slip resistance of surfaces has generally been shown to increase with floor surface roughness and to decrease with hardness of outsole and number of trials under the wet condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.366-366
• /
• 2008

Amorphous carbon (a-C) is an interesting materials and its characteristics can be varied by tuning it $sp^3$ fractions. The $sp^3$ fraction in a-C films depends on the kinetic energy of the deposited carbon ions. In this work, a-C films was synthesized on Si(100) and glass substrates at room temperature by closed-field unbalanced magnetron (CFUBM) sputtering with the increase of graphite target power density. The structural and physical properties of films were investigated by using Raman spectroscopy, X-ray photoelectron spectrometer (XPS), nano- indentation, atomic force microscope (AFM) and contact-angle measurement. We obtained the good tribological properties, such as high hardness up to 26 GPa., friction coefficient lower than 0.1 and the smooth surface (rms roughness: 0.12 nm). The increase of the physical properties with the increase of target power density are related to the increase of nano-clusters in the carbon network. Also, these results might be due to the increase of the subplantation and resputtering by the increase of ions density in the plasma.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.62-70
• /
• 2017

This study has a purpose that definitize correlationship of spatial structure and sales strategies in mixed-use complexes which established in Korea since year 2000. For this purpose, this study tries to analysis spatial structure of mixed-use facilities through space syntax theory and makes an typological categorization based on their space composition. As a result of categorization, Korean mixed-use facilities can be classed as three types. First type is integrated stacking type. Second one is parallel connecting type. Third type is room to room type. According to differences between categories, their spatial structures show different meaning with different sales strategies. Integrated stacking type sales luxury brands and expensive stuffs and it also has deep and complicated structure. That means theses spaces usually make a strategy of exclusion. Parallel connecting type sales special categories and it also has shallow and easy spatial structure. That means these facilities want to make a smooth connection between apposed volumes. Room to room type sales cheap and fancy objects and it also has simple and shallow structure. That means simple spatial structure can be lead contact customer to stuffs. These results mean spatial structure have a effect on design of sales space.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.95-99
• /
• 2001

Giardia lamblia is a parasitic protozoa which is transmitted in the form of a cyst through untreated water and also treated drinking water. Since its presence in water has led to frequent outbreaks of giardiasis and death in many countries, the removal and disinfection of this protozoan cyst from the water supply are of great concern for public health. This study examined the disinfection characteristics of G. lamblia cysts isolated from a Korean patient with giardiasis. When using sodium hypochlorite including 5 or 10 ppm chlorine, the killing rate was initially rapid, however, the disinfection slowed down and a 3log reduction could not be achieved even after 2h. The disinfection effectiveness was also reduced at a lower temperature, thereby implying that the risk o a giardiasis outbreak will be higher in the winter season. A CT (concentration$.$time) curve was constructed based on the results with sodium hypochlorite for use in designing and predicting disinfection performance. The organic chlorination disinfectant SDIS (sodium dichloroisocyanurate) produced a lower pH and a much higher residual effect than sodium hypochlorite. The disinfection of cysts by SDIC continued steadily throughout 2h of contact, although the initial killing rate was lower than that with sodium hypochlorite.