• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.481-491
• /
• 2015

This research has verified the efficacy of character education course in Liberal Art Curriculum in accordance with the objective of K Women's University of which is the 'mind sharing through mindfulness, SMART human resources development'. Most of the content of character education is organized aiming to promote values of "appreciation". The subjects are experimental group and control group, of which are 229. Research methods were t-test of between groups. The effects of the course have shown that the experimental group students were higher on the level of connectedness sub-scale in Gestalt Contact Boundary Scale than those of the control group students(t=2.323, p = .021). Although the 'character education' course increased connectedness, but it no positive effect on mindfulness skill and self-esteem. This results showed that character education course is effective to promote mind sharing and connectedness in part. It was discussed about a way of further refining course contents and the need to reflect educational philosophy of the K Women's University.

• Korean journal of applied entomology
• /
• v.42 no.3
• /
• pp.249-255
• /
• 2003

These studies were carried out to investigate fumigant, contact toxicity and repellency effects of 34 terpenes against acaricide susceptible the two-spotted spider mite, Tetranychus urticae. In addition, the efficacy was also tested against two acaricide-resistant strains. Two terpenes, isosafrole and safrole showed fumigant toxicity of 98.4%, at 10${\mu}\ell$/1 (air) concentration. LD$\_$50/ values of these two terpenes were 2.6${\mu}\ell$/1 and 4.3${\mu}\ell$l/1, respectively. Most terpenes showed low or no contact toxicity, except isosafrole showing 60.2% mortality against eggs. Hexanoic acid and limonene showed repellency effects of 79.1%, 87.8%, respectively, to the susceptible strain at concentration of 1,000 ppm in the lab conditions. Hexanoic acid (1,000 ppm) showed repellency effected of 77.8% and 83.3% to fenpropathrin and pyridaben resistant strains, respectively. However, limonene showed no repellency to the two resistant strains.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.229-238
• /
• 2017

Objective: The purpose of this study was to identify the effects of taping therapy and inner arch support on pes planus lower extremity alignment and gait. Method: The study was conducted on 13 women in their 20s who had pes planus and no gait problems. Independent variables were the condition of wearing basic socks (S1) and the condition of wearing socks with taping therapy and inner arch support (S2). The dependent variables were resting calcaneal stance position (RCSP), plantar pressure distribution during gait, and underlying and medial longitudinal arch angle measured using radiography. Statistical analysis was performed using the Wilcoxon test with SPSS 23.0 for comparison of S1 and S2. Results: In the RCSP measurement, the angle range of S2 changed to normal. Meary's angle appeared to be less than the angle of S1, indicating alleviation of the degree of pes planus. The calcaneal pitch angle increased at S2 from that at S1. The plantar pressure distribution was divided into four areas (toe, forefoot, midfoot, and hindfoot). At S2, the maximum pressure increased in the toe and midfoot. The maximum force increased significantly in the toe and midfoot but decreased significantly in the forefoot and hindfoot. In addition, the contact area increased overall especially at the midfoot and hindfoot. Contact time decreased in the toe and forefoot, but increased in the midfoot and hindfoot. Conclusion: Taping therapy and inner arch support showed structural improvement of the pes planus. In addition, the force and pressure applied to the foot during walking are distributed evenly in the area of the sole, thus positively affecting walking.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.397-397
• /
• 2016

Triboelectric nanogenerators (TENG) can produce power from ambient mechanical sources and have strong points of high output performance, light weight, low cost, and easy manufacturing process. It is expected that TENG can be utilized in the fields of wireless electronics and self-powered devices in the world which pays attention to healthcare and the IoT. In this work, we focus on scavenging ambient rotational energy by using a durably designed TENG. In previous studies regarding harvesting rotation mode energy, the devices were based on sliding mechanism and durability was not considered as a major issue. However friction by rotation causes reliability problems due to wear and tear. Therefore, in this study, we convert rotary motion to linear motion utilizing a cam by which we can then utilize contact-mode TENG and improve device reliability. In order to increase output performance, bumper springs were used below the TENG and the optimum value for the bumper spring constant was analyzed theoretically. Furthermore, the inserting a soft substrate was proposed and its effect on high output was determined to be due to an increase in the contact area. By increasing the number of cam noses, the output frequency was shown to increase linearly. For the purpose of maximum power transfer, the input impedance of the device was determined. Finally, to demonstrate the use of the C-TENG as a direct power source, it was installed on a commercial bicycle wheel and connected to 180 LEDs. In conclusion we present a rotational motion TENG energy scavenger system designed for enhanced durability and optimized output by appropriate choice of spring constants and substrate.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.103-111
• /
• 2015

Objective : The purpose of this study was to evaluate the effect for running shoes with resilience of midsole on biomechanical properties. Methods : 10 healthy males who had no history of injury in the lower extremity with an average age of 26.5 year(SD=1.84), height of 172.22 cm(SD=4.44) and weight of 67.51 kg(SD=6.17) participated in this study. All subjects ran on the treadmill wearing three different running shoes. Foot pressure data was collected using Pedar-X system(Novel Gmbh, Germany) operating at 100 Hz. Surface EMG signals for biceps femoris, rectus femoris, vastus lateralis, medial lateralis, tibialis anterior, medial gastrocnemius, soleus and peroneus longus were acquired at 1000 Hz using Bignoli 8 System(Delsys Inc., USA). To normalize the difference of the magnitude of muscle contractions, it was expressed as a percentage relative to the maximum voluntary contraction (MVC). The impact resilience of the midsole data was collected using Fastcam SA5 system(Photron Inc., USA). Collected data was analyzed using One-way ANOVA in order to investigate the effects of each running shoes. Results : TPU midsole was significantly wider in contact area than EVA, TPE midsole in midfoot and higher in EMG activity than EVA midsole at biceps femoris. TPE midsole was significantly wider in contact area than EVA midsole in rearfoot and higher in peak pressure than EVA midsole in forefoot. EVA midsole was significantly higher in EMG activity than TPU midsole at tibia anterior. In medial resilience of midsoles, TPE midsole was significantly higher than EVA, TPU midsole. Conclusion : TPU midsole can reduce the load on the midfoot effectively and activate tibialis anterior, biceps femoris to give help to running.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.5.1-5.1
• /
• 2009

Organic photovoltaic (OPV)cells have attracted considerable attention due to their potential for flexible, lightweight, and low-cost application of solar energy conversion. Since a 1% power conversion efficiency (PCE) OPV based on a single donor-acceptor heterojunction was reported by Tang, the PCE has steadily improved around 5%. It is well known that a high parallel (shunt)resistance and a low series resistance are required simultaneously to achieve ideal photovoltaic devices. The device should be free of leakage current through the device to maximize the parallel resistance. The series resistance is attributed to the ohmic loss in the whole device, which includes the bulk resistance and the contact resistance. The bulk resistance originated from the bulk resistance of the organic layer and the electrodes; the contact resistance comes from the interface between the electrodes and the active layer. Furthermore, it has been reported that the bulk resistance of the indium tin oxide (ITO) of the devices dominates the series resistance of OPVs for a large area more than $0.01\;cm^2$. Therefore, in practical application, the large area of ITO may significantly reduce the device performance. In this work, we investigated the effect of sheet resistance ($R_{sh}$) of deposited ITO on the performance of OPVs. It was found that the device performance of polythiophene-fullerene (P3HT:PCBM) bulk heterojunction OPVs was critically dependent on Rsh of the ITO electrode. With decreasing $R_{sh}$ of the ITO from 39 to $8.5\;{\Omega}/{\square}$, the fill factor (FF) of OPVs was dramatically improved from 0.407 to 0.580, resulting in improvement of PCE from $1.63{\pm}0.2$ to $2.5{\pm}0.1%$ underan AM1.5 simulated solar intensity of $100\;mW/cm^2$.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.902-912
• /
• 1996

In the skeletal isomerization of 1-pentene over various solid acid catalysts, we have studied catalytic reactivity, selectivity, reaction mechanism and the relation between acid strength of catalysts and catalytic activity. Natural zeolite shows highest activity among the all catalysts and the modified ${\eta}$-alumina with fluorine and sulfuric acid shows higher activity than unmodified ${\eta}$-alumina. The yield of isopentene increases with increasing temperature and increasing contact time. However the cracking products increase at the high temperature and very high contact time. In addition, the activity of natural zeolite exchanged with metal cation decreases and shows good relation with the polarizing power of metal cation. According to the result of ammonia TPD, the acid strength of catalysts has an effect on catalytic activity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2010

The paper proposes a multi-body dynamic simulation to numerically evaluate the generated axial force(G.A.F) and plunging resistant force(P.R.F) practically related to the shudder and idling vibration of an automobile. A numerical analysis of two plunging types of CV joints, tripod joint(TJ) and very low axial tripod joint(VTJ), is conducted using the commercial program DAFUL. User-defined subroutines of a friction model illustrating the contacted parts of the outboard and inboard joint are subsequently developed to overcome the numerical instability and improve the solution performance. The Coulomb friction effect is applied to describe the contact models of the lubricated parts in the rolling and sliding mechanisms. The numerical results, in accordance with the joint articulation angle variation, are validated with experimentation. The offset between spider and tulip housing is demonstrated to be the critical role in producing the 3rd order component of the axial force that potentially causes the noise and vibration in vehicle. The VTJ shows an excellent behavior for the shudder when compared with TJ. In addition, a flexible nonlinear contact analysis coupled with rigid multi-body dynamics is also performed to show the dynamic strength characteristics of the rollers, housing, and spider.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.27 no.1
• /
• pp.45-50
• /
• 2016

Background and Objectives : This study aims to conduct post-voice therapy to patients with unilateral vocal fold paralysis for vocal improvement, motility recovery and analyze the results. Materials and Methods : Voice therapy was conducted to 13 patients who had shown response to voice therapy amongst 98 patients diagnosed with unilateral vocal fold paralysis. In order to be able compare before and after perceptual, acoustic and aerodynamic evaluations were conducted after voice therapy. Also, by using dysphagia checklist, we have verified whether if the patient had dysphagia prior to voice therapy. The therapy was conducted by improving the larynx movement and glottal contact, whilst removing hypertension of the supraglottic. Results : All 13 patients who underwent voice therapy had shown improvements that are statistically significant from 4 scales excluding the S scale from auditory perception evaluation (p<0.05), with enhanced glottal contact. In acoustic evaluation, Jitter, Shimmer and NHR had shown significant improvement after voice therapy. MPT was also notably improved among aerodynamical evaluation (p<0.001). All 11 patients had with dysphagia prior to voice therapy reported to have improved swallowing functions. Conclusion : Application of adequate voice therapy to patients with unilateral vocal fold paralysis, is an effective method that might be employed in the initial phase. Especially, the voice therapy proposed in this study is expected to be useful for patients in hypertension status due to secondary compensation after initial paralysis, since it focuses on improving vocal symptoms in a calm state with the supraglottis sufficiently relaxed. Also, the therapy is expected to be effective for improving swallowing functions.