• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.8 no.3
• /
• pp.12-18
• /
• 2012

The purpose of this study is to make an economic analysis(Life cycle cost) of selecting optimal air conditioning system for a research building which is 8 stories with a total floor area of $32,010m^2$. Energy consumptions of three proposed air-conditioning systems(Alt-1,2,3) that reflect the government green-growth policy are calculated and compared. The results show that life cycle cost of Alt-3(Ventilation DX AHU+EHP) is less than Alt-1(EHP+ventilation DX AHU) by 5.1%, and Alt-2(Absorption chiller/heater+EHP) by 34.3%. Annual energy consumption of Alt-3 is less than Alt-1 by 9.9%, and Alt-2 by 37.4%. Annual $CO_2$ emission of Alt-3 is less than Alt-1 by 9.9%, and Alt-2 by 0.2%.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.285-296
• /
• 2014

The objective of optimization is to present a design process that minimizes the total material consumption while satisfying current codes and specifications. In the research an optimization formulation for RC shear wall structures is proposed. And based on conceptual design methodology, an optimization process is investigated. Then optimal design techniques and specific explanations are introduced for residential buildings with shear wall structure, especially for that with a rectangular layout. An example of 30-story building is presented to illustrate the effectiveness of the proposed optimal design process. Furthermore, the influence of aspect ratio on the concrete consumption and the steel consumption of the superstructure are analyzed for this typical RC shear wall structure; and their relations are obtained by regressive analysis. Finally, the optimal material consumption is suggested for the residential building with RC shear wall structure and with rectangular layout. The relation and the data suggested can be used for guiding the design of similar RC shear wall structures.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.10
• /
• pp.646-655
• /
• 2011

This study aimed at quantifying the impact of the reinforced standard for envelope insulation on heating and cooling energy consumption in a Korean detached house as well as at identifying the effect of regionally subdivided standards. For them, a series of simulations for application of the reinforced standard on respective walls, roof, floor, windows, and all envelopes were computationally conducted for a prototypical detached residential building. In addition, the subdivided standards were applied to each regions-central and southern regions, and the Jeju island. Analysis revealed that heat transfer through envelopes was the most significant source of building heat gain and loss; the reinforced standard effectively reduced heating energy consumptions, especially in central region; and the subdivided standards did not presented a clear difference in the amount of energy consumption for the southern region and the Jeju island, thus, a further study is required to investigate the necessity of regional subdivisions.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.2
• /
• pp.230-244
• /
• 1999

1) Table salt (=NaCl=common salt=salt) is scientifically characterized, and the significant role in dietary and daily life has generally been discussed from the standpoint of human ecology. 2) In dietary life, salt fundamentally gives a deliciousness to dishes and nutro-physiologically functions to keep homeostasis in the body. Meanwhile, the excessive intake of salt often causes the high blood pressure and induces several fatal diseases. 3) In daily life, salt derivatives(Na-, Cl-compound) are quite useful widely over food, clothing and housing. Meanwhile, some of them especially organochlorine compounds often pollute the environment and damage the humans and or ecology as so-called environmental hormone resulting in dioxins. 4) For the ambivalence of salt in health and environment, humans, but not salt, are wholly responsible. The fact would go not only to salt but also generally to resources on the earth. 5) Humans should adequately be moderate in utilizations and consumptions of salt and or resources. Everything must be kept with in bounds. This conception would surely bring the stable maintenance and the sound development to the system of human ecology as well as global ecology.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.41-42
• /
• 2007

DMAC is an energy efficiency and low latency protocol designed for data gathering tree structures. However, it causes the funneling effect which is many-to-one traffic patterns in tree structures, consequently, results in packet collisions, losses, and energy consumptions in low depth nodes. In this paper, we present an energy efficient MAC protocol with fairness-based scheduling to avoid the funneling effect of DMAC protocol. By using traffic information from children nodes, our protocol dynamically adjusts duty cycles of last-depth nodes to mitigate overloaded packets in the vicinity of the sink node. Therefore, we expect our protocol to save more energy and achieve better packet delivery ratio, compared to DMAC protocol.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.13-17
• /
• 2011

We have developed a new energy-consuming monitoring system that has made it possible to measure the energy consumption of a gas scrubber, one of semiconductor processing equipments, and installed this system to the gas scrubber under operating at a manufacture site. Using this system, we have measured consumptions of electric power and processing gas consumed at standby to operating mode. In case of the gas scrubber, processing gas flows continuously into it at standby and operating mode. Therefore, if the electric power has been supplied, the processing gas can flows into the device for 24 hours. Moreover, at operating of gas scrubber, the amount of electricity consumption is 5 kWh. At Standby of gas scrubber, it spends 3kwh. It is certain that the energy consumption is greater at operating mode than at standby mode. The carbon emission rates from 24 hour gas scrubber operation are 236 $kgCO_2$/day of $N_2$, 57 $kgCO_2$/day of electric power and 0.001 $kgCO_2$/day of cooling water. Most of carbon is emitted from $N_2$ gas and electric power consumption.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.71-77
• /
• 2015

This paper suggested dynamic application framework based data collecting and monitoring technique using wireless sensor network. The development of application for wireless measurement node firmware program integrates with various sensors and performs control. Collecting data of the user application is downloaded from the node onboard process wirelessly. In addition, the user application can change the temperature initial value of the nodes, which enables dynamic sampling of the measurement nodes. Therefore, dynamic sampling control of the nodes can reduce the power consumptions of sensors compared to existing wired data monitoring.

• Journal of electromagnetic engineering and science
• /
• v.17 no.2
• /
• pp.98-104
• /
• 2017

This work describes the development and comparison of two phase-locked loops (PLLs) based on a 65-nm CMOS technology. The PLLs incorporate two different topologies for the output voltage-controlled oscillator (VCO): LC cross-coupled and differential Colpitts. The measured locking ranges of the LC cross-coupled VCO-based phase-locked loop (PLL1) and the Colpitts VCO-based phase-locked loop (PLL2) are 119.84-122.61 GHz and 126.53-129.29 GHz, respectively. Th e output powers of PLL1 and PLL2 are -8.6 dBm and -10.5 dBm with DC power consumptions of 127.3 mW and 142.8 mW, respectively. Th e measured phase noise of PLL1 is -59.2 at 10 kHz offset and -104.5 at 10 MHz offset, and the phase noise of PLL2 is -60.9 dBc/Hz at 10 kHz offset and -104.4 dBc/Hz at 10 MHz offset. The chip sizes are $1,080{\mu}m{\times}760{\mu}m$ (PLL1) and $1,100{\mu}m{\times}800{\mu}m$ (PLL2), including the probing pads.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.1-6
• /
• 2001

Tunnel lighting in Korea has the problems of unsatisfactory illuminance uniformity which obstructs driver's vision, a flicker phenomenon on wall of tunnel, a heavy glare, low efficiency of luminaires, low utilization factor, and high energy consumption. We developed a high efficiency luminaire reflector for tunnel lighting which removes these problems. Developed luminaire saves energy and improves lighting environment by increasing 10% of luminaire efficiency. It can reduce installation cost by decreasing the number of luminaires, while average illuminance of 200[lx], overall uniformity of 0.4, longitudinal uniformity of 0.7, and electric power consumptions per unit area of 3.7[W/m$^2$] are accomplished.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.185-197
• /
• 2017

With the advent of industrial society, the phenomenon of nuclear families has brought many changes in the family environment. Of changes, a decrease in the number of new-born babies led to one-child families, which then led to an increase in interest in children. Interest in children gave birth to a consumptive trend called "kids marketing," and phenomena of generous investment and consumption for children appear to continue to the future. In reality, too, the consumer market of children's apparel and learning materials for children has sharply increased over the past few years, and products related to children have become the center of family consumptions. Therefore, at this point when children are the center of consumptive life in the family and the relationship between products and users is becoming an increasingly more important variable, the conductive research focusing on children is necessary. These important factors embraced wide areas of activities in research on children, from children's physical changes, children's preference, such as color and material, to children's consumptive environment, as they can provide a foundation for furniture design suitable for children.