• Steel and Composite Structures
• /
• v.20 no.5
• /
• pp.1133-1153
• /
• 2016

In this article, an additive performance ratio method using structural analysis of both 2D and 3D is introduced to mitigate the complexity of work evaluating structural performances of numerous steel outrigger alternatives in multi-story buildings, especially high-rise buildings. The combined structural analysis process enables to be the design of economic, safe, and as constructional demanding structures by exploiting the advantages of steel, namely: excellent energy dissipation and ductility. First the approach decides the alternative of numerous steel outriggers by a simple 2D analysis module and then the alternative is evaluated by 3D analysis module. Initial structural analyses of outrigger types are carried out through MIDAS Gen 2D modeling, approximately, and then the results appeal structural performance and lead to decide some alternative of outrigger types. ETABS 3D modeling is used with respect to realization and evaluation of exact structural behaviors. The approach reduces computational burden in compared to existing concepts such as full 3D analysis methods. The combined 2D and 3D tools are verified by cycle and displacement tests including comprehensive nonlinear dynamic simulations. The advantages and limitations of the Additive Performance Ratio Approach are highlighted in a case study on a high rise steel-composite building, which targets at designing the optimized alternative to the existing original outrigger for lateral load resisting system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.227-235
• /
• 2004

Tunneling in rock mass produces two types of damages in the vicinity of a tunnel: structural and constructional damages. Structural damage represents the damage induced by the unbalance of geostatic stress caused by the tunneling, and constructional damage is the damage produced during the construction. In this study, formulations of tangential and radial stresses in the elastic and plastic zones near a tunnel, and the calculation of radius of plastic zone surrounding a tunnel are introduced by modifying the Hoek-Brown criterion of 2002 edition, which has capability of considering in situ rock mass characteristics and construction damage. From the parametric study, influences of rock mass quality, uniaxial compressive strength of intact rock, and the dimension of the tunnel on the plastic zone are investigated. The accuracy of the proposed approach is evaluated by comparing with results from the previous study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.31-34
• /
• 2012

The construction industry is hard to apply to the statistical methodology of 6-sigma. For example, it is hard to verification of fraction defective through quantity production. So, in this research the proposed approach for effective process of technology development through establish of innovative methodology reflecting constructional characteristics. Few studies have progressed in construction industry, but there are so many examples using 6-sigma for applying to customer needs at the product development or process improvement in manufacturing business. So this research proposed the design methodology using QFD of 6-sigma and TRIZ.

• Language and Information
• /
• v.12 no.1
• /
• pp.85-103
• /
• 2008

Like English, Korean employs several complicated types of cleft constructions. This paper deals with two main types of Korean cleft constructions: predicational and identificational. It first reviews the formal properties of these two types and then provides a constraint-based analysis that can be computationally implemented. In particular, the paper assumes two types of noun KES (one as a common noun and the other as a bound noun) and treats the argument-gapped cleft clause similar to relative clauses while treating the adjunct-gapped cleft clause as a noun-complement construction. The paper further shows that the cleft constructions are closely linked to the copula constructions, sharing many common properties while having their own constructional constraints.

• Journal of architectural history
• /
• v.18 no.6
• /
• pp.127-144
• /
• 2009

This thesis aims to analyze the architectural form for the restoration of noogak(樓閣), Boje-roo(普濟樓) which was constructed at the central court of Beomeo-sa(梵魚寺). The results are as follow; 1. Boje-roo was established in 1700. By the constructional records and poetic essays of the times, the architectural of the establishment building was consisted fo two stories structure. The passage system for the approach to the court was the nuha-jinip(樓下進入), that is to say, one might walk between the columns of lower story of the building. And one could ascent the upper stairs and approach to the upper level, inner court. 2. By the remodelling in 1812, the building was varied to one story structure. Therefore the passage system for the approach to the inner court transformed from the nuha-jinip to the ugak-jinip(隅角進入), that is to say, one might ascent the atairs of the podium and could approach the inner court through the both sides of the building. 3. Under the Japanese imperialistic rule, the structure of it's roof and walls of Boje-roo were altered to the Japanese style. In 1965, the wooden columns were shifted to the concreted column, and the wooden wall-panels were shifted to the brick wall attached stone slates. 4. Conclusively speaking, for the restoration of Boje-roo, the establishment form in 1700 is the more proper than the remodelling form in 1812.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.693-705
• /
• 2013

Procedural models have the advantage of being easy to edit simply by changing the values of the parameters of their constructional operations. In previous studies, we have introduced an approach for representing procedural 2D CAD models in ISO 10303 and developed ISO 10303-112 for the exchange of procedural 2D CAD models. In this paper, a method for the development of a procedural 2D CAD data translator supporting ISO 10303-112 is suggested. Furthermore, the core techniques applied to the translator are presented. The feasibility of the proposed method was demonstrated through data exchange experiments using a prototype translator.

• Structural Engineering and Mechanics
• /
• v.67 no.1
• /
• pp.53-67
• /
• 2018

The changes of parameters of pressure and velocity of propagation of elastic pressure and shear waves in uniformly deformed solid compressible media are studied within the nonclassically linearized approach (NLA) of nonlinear elastodynamics to create a new theoretical basis of the geomechanical interpretation of various groups of geophysical observational and experimental data. The cases of small and large deformations are considered while their describing by various elastic potentials, i.e., problems considering the physical and geometric nonlinearity. Convenient analytical formulae are obtained to calculate the indicated parameters in the deformed isotropic media within the nonclassical linear and nonlinear solution in the NLA. Specific numerical experiments are conducted in case of overall compression of various materials. It is shown that the method (generally accepted in the studies of mechanics of standard constructional materials) of additional linearization (relative to the pressure parameter) in the basic correlations of the NLA introduces substantial quantitative and qualitative errors into the results at significant preliminary deformations. The influences of the physical and geometric nonlinearity on the studied characteristics of the medium are large in various materials and differ qualitatively. The contribution of nonlinear components to the values of the considered parameters prevails over linear components at large deformations. When certain critical values of compression deformations in the medium are achieved, elastic waves with actual velocity cannot propagate in it. The values of the critical deformations for pressure and shear waves differ within different elastic potentials and variants of the theory of initial deformations.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.163-167
• /
• 2001

Many of these studies represent a large scale distribution network with a unified formulation by using defined symbols. This can be evaluated as a valuable progress toward accomplishing of a systematic approach the area of distribution network. Unfortunately. transportation problem and inventory policy applied in these studies have an assumption of using an unique supplier for calculating the transportation cost among each distribution echelon. This assumption can cause many problems such that transportation problem is assumed as linear problem, too many number of distribution center are allowed to operate and many more. In order to overcome above unrealistic problems, we developed an algorithm of responding to customers' demand under the refill allowance of same level supply as anew constructional method of inventory distribution network. When backorders are happened in regional distribution center, this algorithm allows transferring finished goods to customer directly from vicinal Regional distribution center instead of existing central distribution center for quick response.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.972-982
• /
• 2017

The Park's vector of stator current is a popular technique for the detection of induction motor faults. While the detection of the faulty condition using the Park's vector technique is easy, the classification of different types of faults is intricate. This problem is overcome by the Multiple Park's Vector (MPV) approach proposed in this paper. In this technique, the characteristic fault frequency component (CFFC) of stator winding faults, rotor winding faults, unbalanced voltage and bearing faults are extracted from three phase stator currents. Due to constructional asymmetry, under the healthy condition these characteristic fault frequency components are unbalanced. In order to balanced them, a correction factor is added to the characteristic fault frequency components of three phase stator currents. Therefore, the Park's vector pattern under the healthy condition is circular in shape. This pattern is considered as a reference pattern under the healthy condition. According to the fault condition, the amplitude and phase of characteristic faults frequency components changes. Thus, the pattern of the Park's vector changes. By monitoring the variation in multiple Park's vector patterns, the type of fault and its severity level is identified. In the proposed technique, the diagnosis of faults is immune to the effects of unbalanced voltage and multiple faults. This technique is verified on a 7.5 hp three phase wound rotor induction motor (WRIM). The experimental analysis is verified by simulation results.

• Journal of Science of Art and Design
• /
• v.6
• /
• pp.203-225
• /
• 2004

We are sure that Abakanowicz positively assumes a position of members, which are represented the later modern fabric design. In sprite of his pervasive evaluation, we have doubt about his achievement because the preceding research is insufficient about argumentsuch as dependence on intuitive emotion study, conventional analysis of structure and insufficient inquiry of causa efficiens. We agree that basic structure of is dissipation. Though right and left symmetrical structure is similar, also that structure is different. We can't decide whether structure is unification structure, difference structure or mixture structure . We think that the time of confusing argument of his structure is changing period for disorganization trend. The result of this study confirm the research possibility about space organization with restructure analysis and verification for examining essence structure of sample text . The Thesis are concern that the different between paradigmatic appearances and syntagmatic, which exist . So, we can approach the meaning of system and find dominent point about constructional relationship on the works. The meaning of dominent point is understood about sexless trend or Androgyne, which are appeared Abakanowicz forth work period. The relationship structure which is mixed both issue show that inner issue of work is located the highest position. The paper presents confusing manufacture system, which are suggested man-woman sex and mixed meaning. The other result of this study are, 1. being known as Abakan algorism, Abakanowicz has new drafting idiom from his ancient belief. 2. we need to research the body texture of Abakanowicz with the trend of restructure of body study. 3. we need argue about gender study in relative with poster moderntheology related problem of sexlessness people and perfect sex-people.