• 한국통신학회논문지
• /
• 제34권1C호
• /
• pp.9-14
• /
• 2009

본 논문에서는 매개 변수가 (N,M,L,1)인 특정 성질을 가진 이진 낮은 상관 구역 수열균(LCZ sequence)를 이용하여 매개 변수가 (2N,2M,L,2)인 4진 낮은 상관 수열군을 생성하는 방법을 제시한다. 본 논문에서 이용하는 이진 낮은 상관 수열군은 balance property를 가지고 있어야 하며, 주기 N이 $N{\equiv}3$ mod 4이어야 하고, 특정한 상관 특성을 가져야 한다. 새로 제안된 생성법은 특정 성질을 가진 이진 낮은 상관 수열군을 이용하여 이진 낮은 상관 수열군을 생성한 Kim, Jang, No, and Chung의 생성법을 응용한 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.182-183
• /
• 2021

In this study, This is the result of thermal characteristics analysis to suggest an efficient method of using coal gasification slag(CGS) of byproduct from integrated gasification combined cycle(IGCC). In Specific Heat characteristics, CGS and CS showed similar values. Isothermal Conduction Calorimetry showed that the hydration reaction of cement was retarded when CGS was used. Therefore, it is expected that CGS will be used as an efficient alternative to reducing the hydration heat of mass concrete as a functional aggregate combination.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.63-64
• /
• 2022

In this study, the quality of mineral admixture, Comparison of blast-furnace slag(BS) and fly ash(FA)in Korea and China. In the case of BS, Korea is mainly classified into 1 type to 4 types according to the specific surface area, whereas China is classified into S105, 95, and 75 according to the activity index of 28 days of age. In the case of FA, Korea is like BS, is mainly classified into types 1 to 4 according to specific surface area, whereas China is classified into F, C (class F, class C) by ingredients and class I, II, and III according to powder and ignition loss.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.21-38
• /
• 2000

$Fr{\ddot{a}}nkel$ functional regulator have a complicated design and are of a big bulk. This makes not only the construction of appliance but also the adaption of a patient to the appliance very difficult. Therefore, orthodontic laboratory technicians should be well acquainted with the sequential fabrication procedures involved in the construction of Frankel functional regulators and construct a type most suitable for a specific patient of malocclusion. There are various types of Frankel appliances. Detailed construction procedures of FR II are described here below, which can also be applied for other types for FR appliances.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.181-186
• /
• 2006

Estimation based on current data of construction performances have become one of the critical subjects which many researchers have been interested in for the past decades. In order to accomplish accurate measurement and estimation of construction performances, the method of data collection stands the highest priority. However, there are many difficulties in data collection from construction jobsite due to the characteristics of the construction industry. With developments of new technologies in other industries, several technologies has recently initiated to be applied to construction field. Electronic tags based on the identification technology, automatic volume measurement based on laser scanning technology, and Global Positioning System (GPS) have been represented the technologies which show the high opportunity for being used in construction. This study reviews specific aspects of these technologies focused on the utilization in construction jobsite. Also, the challenges which these technologies need to overcome are discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.253-254
• /
• 2016

In the trend of building enlargement, high-rise and irregular shaped building, domestic application of BIM in construction phase is increasing in recent years. BIM that is based on a three-dimensional, requires a specific building expression. Model expression level required for each phase such as design, construction, and maintenance of the construction project can be different. BIM model to apply in practice is difficult because it is not clear to set up the criteria for the expression level of construction BIM model. And it has a limit that is lower productivity in construction project. Therefore, this study considers the way of the improvement and analyzes the application for representation level of construction BIM model through the survey. By analyzing of the survey results, this study will be to present a basis for an appropriate expression level setting of construction BIM model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.100-101
• /
• 2018

Environmental problems caused by air pollution have been considered as serious critical issues in global perspectives. Controlling greenhouse gases has become one of the major environmental problems in construction fields as well. However, similar studies were mainly focused on suggestion of various methodologies for measuring CO₂ emissions of construction equipment and calculating emissions. This study aims to analyze the correlation between the CO₂ emissions and RPMs of equipment by the construction process based on row data collected from construction equipment actually operated in job sites. This study allows site personnels to determine the amount of emitted CO₂ under particular construction equipment under specific conditions during the targeted construction operations. The research findings expect to be used as fundamental informations for establishing environment-friendly construction operation planning.

• 건설안전기술
• /
• 통권36호
• /
• pp.73-81
• /
• 2006

Construction fall accidents have been investigated by many researchers. Construction workers are prone to fall when elevations of the construction site is high. And falls are the most fatal accidents: it can be directly linked to the death. Construction fall accidents might be reduced by predetermining several areas which are highly probable to have fall accidents and by controlling such areas until the completion of the building construction. In this paper, a fall prevention system is suggested which can identify the areas where the focus on fall protection is perhaps most needed from the process characteristics. Main methodologies for this research are summarized as follows: 1. A data base on elements and types of falls is constructed from the data analysis of last 10 years fall accidents history. 2. Guideline is derived by identifying the highly probable areas of fall accidents with respect to the specific construction process. 3. Developed system is verified by applying the system to construction sites. 4. Finally a fall prevention system is suggested by utilizing the fall accidents data.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.949-955
• /
• 2009

Managing knowledge effectively is a critical factor for the competitive power of a company. There are efforts to use knowledge as an important resource in many industrial areas and likewise the interest in knowledge management is growing in the construction industry. Nevertheless, there are limitations in the current capture and reuse of knowledge in the construction industry owing to the unique characteristics of the knowledge created during the processes of projects. The knowledge produced during the processes of construction projects is project-oriented, experiential and context specific and due to these characteristics the reuse of knowledge is difficult. In this research, we focus on capturing and identifying the characteristics of construction knowledge and propose a method to apply these characteristics in developing an ontology based construction knowledge retrieval system to improve construction knowledge retrieval and enhance knowledge reuse.

• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2022년 정기학술대회 논문집
• /
• pp.169-170
• /
• 2022

As the size of construction projects has become larger in recent years, the nature of the disaster safety factors along with the progress of construction is also becoming more complex and diversified. Accordingly, the introduction of computerized construction, new technologies, and new construction methods has resulted in a variety of risk factors in the process and operations, and many new safety construction methods are being tried. Since the construction industry has variable working environments and constantly changes working methods and components depending on the rate of progress, workers at construction sites are always exposed to risk depending on the specific circumstances of the construction industry. This study attempts to collect and analyze major accident cases generated by major accident construction projects as a result of progress in construction work, and to derive the major causes and causes for each safety management activity that affect safety accidents.