• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.157-165
• /
• 2009

The aim of this study on the Munich Olympic Park is to understand the characteristics and design techniques of the environmental design of G$\ddot{u}$nther Behnisch's architecture. This particular work is chosen because it represents a turning point in his architectural life in terms of his approach to environmental design. The goal of this paper is to research Behnisch's design techniques in order to realiz a way to apply nature-friendly design in contemporary-architecture. In Behnisch's architectural works, the organic design philosophies of Hugo H$\ddot{a}$ring and Hans Scharoun are clealy echoed. The site and natural surroundings are always important in his architecture. In terms of his environmentally-friendly approach, Behnisch's architecture can be defined as one which espresses a harmony between architecture and the naturale-surroundings. In terms of the structural aspect, Behnisch's architectural forms are not imposing, but rather waiting to be discovered naturally. In terms of spatial characteristics, Behnisch's spaces are based on organic characteristics and have a strong relationship between the outside and inside. In particular, the artificial architectural landscape in the Munich Olympic Park through cable-construction connects perfectly with nature.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.404-420
• /
• 2021

In this paper, an automatic system of locating the indoor area with weak or no mobile signal was proposed and demonstrated experimentally by using the Internet of Things (IoT) technology. Nowadays, the technicians of mobile services providers need to go along with numerous heavy equipment to measure and record the mobile signal strength at outside environment. Recently, there are systems proposed to do such measurement at outdoor area by using the IoT technology automatically. However, these works could not be applied in the indoor area since there are difficulties to do the indoor mapping and positioning. In this work, the Bluetooth Low Energy (BLE) was used to tackle these two difficulties. After a proper placement of BLE in the testing site, while the technician walk around with a handheld analyzer, the data can be obtained accordingly for further analysis in the proposed system which includes the construction of floor plan, detection of mobile signal strength and suggestion of indoor base stations. The gift wrapping and centroid algorithms were used during the analysis. The experimental results showed that the proposed system successfully demonstrated the indoor mapping, positioning of weak mobile signal area and suggestion of indoor base stations for the normal rectangular rooms with an area of 100 m² on single floor.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.124-130
• /
• 2023

The increase in the number of fatal electric accidents over the years has escalated the demand for specialized forensic engineers to determine their relevant technical causes. Likewise, the complexities associated with identifying the causes of electrocution accidents have prompted the General Department of Forensic Science and Criminology at Dubai Police to adopt a new methodology to diagnose electrocution accidents, consisting of an approach that involves medico-legal examination, electrical diagnosis of the evidence, and trace evidence analysis. This paper will discuss the application of the adopted method in further detail by unfolding two case reports. The first report outlines a case in which a worker got electrocuted at a construction site while attempting to turn on a lamp. The second case report involves the death of a technician in a workshop after trying to disconnect a washing machine from its plug. The methodology was utilized during the investigation of both cases, which were attended by the appointed forensic engineers and showed promising results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.11-22
• /
• 2009

Recently the integration and development of ST(Spatial Technology) and forest geographic information have been used very efficiently for the forest administration. However, even though many application system related to forest information have been developed and improved, there are still paper based inventories management and hand work for data construction and upgrade. In this study the forest information warehouse, which is mapped and managed at work-site operations, was constructed based GIS technology so that the standardization and consistency of current data could be acquired in real time. In addition, these thematic maps were conducted on high resolution satellite images and managed in web based forest information data warehouse form and finally shared through Internet for the very first-line administration officials. This study shows that the forest information standardization service of municipal governments very first time in the Korea and provides the unified decision making support and enterprise formed forest database so that is expected to be the very successful sample to suggest the prototype of national forest spatial data infrastructure.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.71-84
• /
• 2001

Korean peninsula has the most mountainous areas such as mountains and hilly country, and it is surrounded by the sea on all sides but one. In this respect, a large scaled construction works have frequently been conducted. However, it is not easy to porform a large scale blasting work without giving any harm to houses or facilities nationwide. Therefore, blasting work becomes more closely related to maintenance thing due to the development of the downtown or a large structure for key facilities. Many researches on blast in the open space and tunnel blasting have been conducted. On the contrary, research on underwater blasting operations is comparatively scanty even though much more necessity of marine development is required. In this respect, this study aims to investigate the characteristics of underwater blasting operations and to make a comparative study with blast in the open space. As a result of examining into the characteristics during underwater blasting operations, the around oscillation in case of underwater blasting operations shows significantly low compared to that in case of blast in the open space, and this means that much more cautious altitude must be taken in designing underwater blasting operations compared to the design of blast In the open space. As a result of analysis on the difference between a square root and a cube root In the equation of estimating oscillations in the actual site, it is shown that it is shown to apply a square root for the estimation of oscillation at 60 meters in case of underwater blasting operations and at 22 meters case of general blast in the open space.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.1
• /
• pp.43-75
• /
• 2017

In this study, Employment Status and Environment of Librarian, to investigate the employment prospect survey was conducted to the subjects of a librarian. The results of this study are as follows. First of all, employment environment of the library site base on the cognitive survey was showed that low wages, unstable jobs, difficulty in work due to staff placement that does not match majors, disagreement with the boss, self-regard as a librarian, excessive workload, a poor work environment etc. Second, the field workers preferred cultural program related electronic information organisation and service as the contents to be added to the curriculum of the library information department of the university. Third, the employment environment of irregular workers is characterised by high competition, low wages, high turnover number, and excessive workload. Fourth, The biggest problem when preparing for employment was the lack of employment information. Therefore, various improvement measures based on the results of the above studies are required, especially, construction of employment information system, Introduction of the field - based curriculum, specific employment conditions are required when hiring.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.141-150
• /
• 2014

This study analyzed monthly excavation length and amount of time occupied by the work item based on drilling reports to record the entire work process of TBM tunnel site. TBM equipment( ${\varnothing}2.6m$, ${\varnothing}3.0m$, ${\varnothing}3.5m$, ${\varnothing}3.8m$) was developed by WIRTH company in Germany. In addition, This study analyzed rising expected monthly excavation length based on the lowest loss rate of operating shifts among the field of nine. Analysis results are confident to be a useful tool when Planning and Managing TBM method construction to the primary planning steps in the field similar to geological conditions and analyzed geological conditions.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.138-144
• /
• 2021

In the electronic component assembly business, when product defects occur, it is important to track incoming raw material defects or work defects, and it is important to improve suppliers or work sites according to the results. The core task of the smart factory is to build an integrated data hub to process storage, management, and analysis in real time, and to manage cluster processes, energy, environment, and safety. In order to improve reliability through accurate analysis and collection of production data by real-time monitoring of production site management for electronic parts-related small and medium-sized enterprises (SMEs), the establishment of a smart factory is essential. This paper was developed to be utilized in the construction by defining the system configuration method, smart factory-related technology and application cases, considering the characteristics of SMEs related to electronic components that want to introduce a smart factory.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.58-67
• /
• 2021

Incident investigation is regarded as a means to improve safety performance. For the prevention of industrial accidents, measures such as providing safety education, enhancing management interest and participation, establishing a safety management system, and conducting inspection of the work site are necessary. In particular, accident investigation activities, which are an important element of safety management, help to prevent similar accidents, thereby minimizing damage and enhancing work safety. They are critical for understanding business-related incidents and the vulnerabilities and opportunities associated with them. Therefore, it is clear that accident investigation activities are important for accident prevention. The primary focus of many incident investigation processes is on identifying the cause of an event. While considerable research has been conducted on potential accident investigation tools there has been little research on including the views and experiences of practitioners in the accident investigation process. In this study, a questionnaire survey was conducted among safety managers in the domestic manufacturing/construction industry to understand the practice of accident investigation. The investigation pertained to companies' accident investigation systems, the competence of investigators, and the identification and recommendations of the cause of accidents. From the analysis results of accident investigations, investigators' competence, the difficulty level of investigations, and the root causes of accidents were identified from the viewpoint of the participants of the accident investigations. In particular, the development of standardized and simple accident investigation methods and their dissemination to companies were found to be necessary for activating the root cause of accidents. Based on this, it can be used as basic data for the development of root cause analysis investigation techniques that are easily applicable to organizations.

• Korean Journal of Environment and Ecology
• /
• v.22 no.4
• /
• pp.396-408
• /
• 2008

Gwangtan-myeon, Paju-si, Gyeonggi-do was classified as a 4 grade age-class deciduous tree forest, however as a result of vegetation survey, this site was found to consist of natural forest with deciduous trees, thus causing difficulty in judging which age class it belongs to. Subsequently, the necessity of drawing up a detailed stock map plan was raised. For this reason, this research was designed to propose a mapping method for a detailed stock map plan based on a detailed survey on actual vegetation, vegetation structure, and analysis data on tree rings. The detailed analysis of actual vegetation pattern showed that there exist 22 patterns of vegetation, in which the natural forest has 11 patterns, such as Quercus mongolica forest and Q. variabilis forest, etc. while the artificial forest was found to have 6 patterns including Castanea crenata, etc. In order to verify their age-class, this research measured a tree age by collecting 42 quadrats and 89 specimen tree cores on the basis of a detailed actual vegetation map; as a result, an artificial forest and oak trees with small diameters located at low-lying areas, was categorized as 2-grade age class(covering 29.8%), and other areas were judged to be available for land use as 3-grade age-class(covering 57.6%) while the areas judged to be 4-or-more grade age-class (covering 8.8%) was impossible for land use because they are located on a steep slope ridge line on a boundary. In case a proposed site for a small-scale development is judged as a natural forest with deciduous trees as mentioned above, it is necessary that a detailed stock map plan should be drawn up through a detailed investigation into actual vegetation and analysis of plant gathering structure & specimen trees. A detailed stock map plan includes the data that makes it possible to comprehensively judge natural property, scarcity, and diversity of vegetation; thus, it is considered that a detailed stock map plan will be useful in judging the development propriety of a small-scale site.