• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.47-51
• /
• 2015

In this paper, feasibility of dynamic characteristics recovery of delaminated composite structure is numerically studied by using active control algorithm and piezoelectric actuator. Macro-fiber composite(MFC), which has great flexibility and high actuating force, is considered as an actuator in this work. After construction of finite element model for delaminated composite structure based on improved layerwise theory, modal characteristics are investigated and changes of natural frequencies and mode shapes, caused by delamination, are observed. Then, active control algorithm is realized and implemented to system model and control performances are numerically evaluated. Dynamic characteristics of delaminated composite structure are effectively recovered to those of healthy composite structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.409-412
• /
• 1996

Ultrasonic sensors are widely used in various applications due to advantages of low cost, simplicity in construction, mechanical robustness, and little environmental restriction in usage. But the main purposes of the noncontact sensing are rather narrowly confined within object detection and distance measurement. For the application of object recognition, ultrasonic sensors exhibit several shortcomings of poor directionality which results in low spatial resolution of objects, and specularity which gives frequent erroneous range readings. To resolve these problems in object recognition, an array of the sensor has been used. To improve the spatial resolution, more number of sensors are used in essence throughout the various devices of the sensor arrays. Under the disguise of a fixed number of the sensors, the array can be shifted mechanically in several steps. In this paper we propose a practical sensor resolution enhancement method using an electronic circuit accompanying the sensor array. The circuit changes the transmitter output voltage in several steps. Using the known sensor characteristics, a set of different return echo signals provide enhanced spatial resolution. The improvement is obtained with neither the cost of the increased number of the sensors nor extra mechanical devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.585-588
• /
• 1997

This paper presents a construction method of logic-based switching control system which operates in widely changing environments. The logic-based switching controller is composed of a family of candidate controllers together with a supervisor. The system does not require any identification schemes of environments. Switching from one candidate controller to another is carried out based on monitoring the output of the system. The basic ideas of adaptation are as follows: (1)each candidate controller is prepared for each environment in advance; (2)the supervisor applies a sequence of speculative controls to a plant with candidate controllers just after the control has started and just after the change of the environment has been detected. It is important that each candidate controller can keep the system stable during a sequence of speculative controls, and the most appropriate candidate controller for the environment to which the system is exposed can be selected before the last speculative control is ended. An application to an antiskid braking system clarifies the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1945-1948
• /
• 2004

This paper describes the design and construction of a micro robotic system addressing such important aspects as versatility and low cost for rapid development and test of new control algorithm. The design and structure of micro robots are presented in detail. The supervision oriented concept is designed for controlling a group of micro robots. In this concept, the vision system recognizes the environment and the host computer decides the micro robot action based on the information from the vision system. In addition, the micro robots can be implemented cheaply and small in size because the structure of supervision oriented system is simplest. The experimental results and the performance of the proposed micro robotic system are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1187-1190
• /
• 2004

This paper presents a traveler guidance system that offers 3D street information such as road types, signal light systems, street trees, buildings, etc. We consider 5x4 road system of Gangnam(in Seoul, Korea) as a test area and reflect the traveler's car-driving situation. A web server is constructed to serve traveler's driving path by switching 3D animation scenes automatically. To do batch processing of geometric data for the 3D graphical streets construction, we have extracted major street information from present GIS database and created new GIS file formats (SMF files), which contain data sessions for links, nodes, and facilities. With these files, we can render 3D navigation scenes. A number of vector calculations were performed for the geometrical consistence and texture-mapping method was used for the realistic scene generation. Finally, we have verified the effectiveness of the service by operating a test scenario. We have checked whether traveler's 2D path and 3D navigation are exactly reported after setting specific departure and destination. This system offers us well awareness of streets and takes useful role of traveler guidance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1152-1156
• /
• 2003

For pneumatic valve system control, we need a serial data transmission system with high speed and reliability for information interchange between main computer and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic valve system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid control valves. in addition, we developed a communication protocol for construction of rs-485 based multi-drop network and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. the field test results show that, even under high noise environment, the data transmission of 375kbps rate is possible up to 1,500meter without using repeater. In addition, the system developed in this research is easily to be extended for a communication network because of its modular structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.859-864
• /
• 2003

This paper presents a design for the novel suspension mechanism of a two-wheeled mobile robot having two casters which is used for indoor environment. Although the indoor environment is less rough than the outdoor one, the fixed caster mechanism has some problems such as causing the robot to be immovable because robot's driving wheels do not have contact with the ground. Therefore, we tried installing a spring-damper suspension mechanism to keep driving capability and to remove pitching phenomenon. However, this suspension mechanism also has the problem, which the robot body inclined by disturbances does not return to the initial position. To deal with above problems and to accomplish desired performances, we designed the Multilayered Suspension Mechanism, which has springs and dampers working partially according to the inclined angle and angular velocity of robot body concerned with pitching. To analyze design, the equations of motion describing their dynamics were developed. Using the equations, simulation results show the improved performance. We confirm the usefulness of the Multilayered Suspension Mechanism by construction and test of a actual prototype.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.107-109
• /
• 2004

Assuming that life of urban transit signaling is about 20 years with the flow of technology development, Seoul urban transit will be required to prepare for improvement soon. The highly developed countries preceding several levels rather than Korea are faced with commercial service, which uses RF, ATC and ATO in Train Control System. European highly developed countries in the field of railroad have been progressing standardization and technology development of signaling associated with related manufacturers for direct operation between nations. For that, a effective train control system with radio beyond control levels by the existing wayside-onboard communication is in a developed and used stage. The systems, which advanced countries have been progressing, seem to be applied to domestic within 5 years from now. At present, there are no countries using CBTC for service throughout the world. So, this is investigated to focus on the routes ready to be installed with completed CBTC and trying to introduce the technology. Especially, considerations for economic aspect are mainly reviewed about controlling ability of headway, flexibility, extension aspect and construction cost on the basis of paper examined in NYCT.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.116-119
• /
• 2004

The existing monitoring and control systems of utility-pipe conduit (power tunnel, cable tunnel etc) have established communication lines using optical fiber, leaky coaxial cable (LCX), and several kinds of control cable. Due to the properties of the used media, the cost of equipment is considerably high and the maintenance of the system is difficult. Also, the term of carrying out is long so that the extension of the system is in difficulty. Now it is desirable to adopt Power Line Communication (hereinafter, PLC) technology in the monitoring and control systems and use the existing low-voltage power-line for lamplight as communication line. This will lead the reduction of the construction cost and the easy maintenance of the system. In this paper, we research the characteristics of PLC in conduit, design and manufacture the field test system, and analyze the performance of the system by field test. Then, we introduce the reliable monitoring and control system of utility-pipe conduit using PLC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.165-170
• /
• 2004

The purpose of this work was to assess and quantify the beneficial effects of long-term gas exchange, at varying frequencies, for the development of a vibrating intravascular lung assistance device (VIVLAD), for patients suffering from acute respiratory distress syndrome (ARDS). The experimental design and procedure have been applied to the construction of a new device for assessing the effectiveness of membrane vibrations. An analytical solution has been developed for the hydrodynamics of flow through a bundle of sinusoidally vibrated hollow fibers, with the intention of gaining insight into how wall vibrations might enhance the performance of the VIVLAD. As a result, the maximum oxygen transfer rate was reached at the maximum amplitude and through the transfer of vibrations to the hollow fiber membranes. The device was excited by a frequency band of 7Hz at various water flow rates, as this frequency was the 2nd mode resonance frequency of the flexible beam. 675 hollow fiber membranes were also bundled, within the blood flow, into the device.