• Journal of the Korean Professional Engineers Association
• /
• v.38 no.1
• /
• pp.59-63
• /
• 2005

A Tsunami was generated by the magnitude 9.0 earthquake which occurred near Indonesia. An energetic Tsunami will display vertical water displacement of the order of ten meters and lateral scales of the order of tens of kilometers. The Tsunami destroyed many coastal villages in Asia. So, there are many victims in southeastern part Asia by Tsunami. Therefore, the construction of Tsunami prediction and warning system is needed for minimize the damage by seismic sea waves.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.2
• /
• pp.97-107
• /
• 2004

Wall/floor intersection is important parts of a building envelope system. These intersections can be sources of thermal bridging effects and/or moisture condensation problems. This paper provides a detailed analysis of the thermal performance of wall/floor intersection. In particular, two-dimensional steady-state and transient solutions of the heat conduction within the wall/floor joint are presented. Various insulation configurations are considered to determine the magnitude of heat transfer increase due to wall/floor joint construction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.169-174
• /
• 2009

In this paper, we propose a new construction method of binary low correlation zone (LCZ) sequence set. New construction method applies Gray mapping to conventional quaternary LCZ sequence set that has specific property. The period of new binary sequence set is twice as that of used sequence set in construction, and maximum magnitude of correlation value within the LCZ and cardinality of new set is also twice as those of used quaternary sequence set. But the LCZ size is the same with that of used sequence set. If the used Quaternary sequence set is optimal, the constructed binary sequence set is optimal with high probability.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.144-152
• /
• 2004

Defining value as a measure of how well the project value objectives are met, Value Management Process (VMP) is considered to be any management effort or process that can proactively pursue one or more project objectives (i.e., security/safety, cost effectiveness, schedule optimization, and risk containment). The collection of 44 VMPs has been established based on a rigorous effort conducted by Construction Industry Institute (CII). Because varying circumstances on each project determine the level of suitability, it is crucial to identify which VMP should be implemented on a particular project. The current VMP selection process is primarily based on human intuition. The main objective of this paper is to provide a systematic method to facilitate the usage of VMPs on a particular project. This paper identified and quantified the selection principles (i.e., targeted value objectives, timing of initiation, project characteristics, and relative impact). The data collected from industry practitioners and VMP experts characterized each VMP in terms of the magnitude of benefit. An automated selection tool by Visual Basic Application (VBA) on MS Excel TM, was developed and proved its validity. As a pioneering study, this paper provides a comprehensive and structured knowledge on the subject of VMPs. From the industry's perspective, the automated selection tool, the premier of this study, contributes the facilitation of the VMP implementations in the construction industry thereby maximizing the potential benefits to a particular project.

• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.165-185
• /
• 2004

Assessment in Socio-economic items should be used to estimate social influence when policies and projects were introduced. To estimate current situation of socio-economic items 19 Environmental Impact Statement (EIS) of large scale projects were analyzed. The projects were selected based on magnitude of social impact when the projects were implemented. Environmental Impact Statement was categorized into line projects(road construction, railroad construction, stream development, etc), and surface projects(energy development, wetland reclamation, recreation and sport development, and housing and residential development, etc) thus being chosen for 19 projects in each categories. This report was based on the analysis of 7 items in socio-economic environmental items(i.e., population, residents, industry, public facilities, education, transport and historical monument). Most EIS did not follow the regulation suggested by Ministry of Environment, and only current circumstances were briefly described. Indifference of in-depth analysis of socioeconomic environmental items would influence the process of social and environment impact negatively in the midst of construction of National Projects such as Outer Circle Seoul Highways, Saemankeum Reclamation Projects, etc. This abrupt halt of construction was mostly based on a lack of public hearing or public participation. Socio-economic items are also very much lacking in quantitative method and strengthening socio-economic environmental items is needed via checklist or matrix that brings decision-makers better ideas objectively.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.336-338
• /
• 2015

This research is to propose an applicable framework for real-time health surveillance and safety monitoring at construction sites. First this study aims at finding (1) a framework for health surveillance that is likely to benefit employers and employees in the industry, (2) a valid way to identify factors or conditions with potential health concerns that can occur under particular work conditions, (3) An effective way to apply wireless/mobile sensors to construction workers using real-time/live data transmission methods, and (4) A relationship between a worker's vital signs and job site environment. Biosensors for physiological response and devices for weather/work related data are to collect real-time data. Relationships between jobs and physiological responses are analyzed and factors that touched particularly contributing to certain responses are identified. When data are incorporated with tasks, factors affecting tasks can be identified to estimate the magnitude of the factors. By comparing work and normal responses possible precautionary actions can be considered. In addition, the study would be lead to improving (1) trade-specific dynamic work schedules for workers which would be based on various factors affecting worker health level and (2) reevaluating worker productivity with health status and work schedule, thereby seeking ways to maximize worker productivity. Through a study, the paper presents expected benefits of implementing health monitoring.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.685-686
• /
• 2015

The world is currently undergoing an intense urbanization process. The percentage of urban dwellers has never been so high. In 2010, and for the first time, urban population surpassed the rural one, accounting for 51% of global population, and this trend will continue in the forthcoming years. This increment in concentration of population and supporting assets in cities, make their performance a critical issue for world population. Recent events such as Fukushima tsunami and the hurricane Katrina have shown how fragile built environments are and the unpredictability of occurrence and magnitude of the hazards. Such an expansion of the world's urban population, together with an increase in severity and number of hazards and catastrophes, has put under the spotlight the necessity to build cities not only sustainable, but resilient. Decision makers should acknowledge failure as an option, and the importance of developing city resilience. This paper will provide an initial review on urban resilience, definitions and assessment approaches as a first step for decision makers to account for resilience in their decision making process.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.3-10
• /
• 2012

The current enforcement regulation of "Construction Technology Management Act" prescribes calculation standard of environmental preservation cost in construction site. According to this standard, environmental preservation cost is calculated by using the quantity-per-unit costing method or applied fixed rate on direct cost. However, when calculated by using the quantity-per-unit costing method it is few items to put in the budget according to standard of construction estimate and in the case of using the fixed rate on direct cost it is not considering various characteristics of the construction site. Therefore, it is needed a improvement plan of estimating method and management system for environmental preservation cost. In this study, it surveyed the actual state of the environmental preservation cost according to magnitude of project, site location, anti-pollution facilities and etc. over 38 road projects. The research reported in this paper environmental preservation cost was variously distributed over construction sites. Thus it needs to estimating method and management system to consider characteristics of construction site for environmental preservation cost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.410-413
• /
• 2008

We constructed the regional flood risk and damage magnitude using hazard and vulnerabilities which are climatic, hydrological, socio-economic, countermeasure, disaster probability components for DB construction on the GIS system. Also we developed the Excess Flood Vulnerability index estimation System(EFVS). By the construction of the System, we can perform the scientific flood management for the flood prevention and optional extreme flood defenses according to regional characteristics. In order to evaluate the performance of system, we applied EFVS to Anseong-chen in Korea, and the system's stabilization is appropriate to flood damage analysis.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.218-221
• /
• 1999

We introduce the systematization design method using similarity theory which is profitable in the compatability, the reduction of construction time and price. The design method can make us predict the characteristic experiment for the magnitude we desire as the expression equation applied continuously. We can induce the design sample the user demand with the verification of the data on optimum design previously. Therefore, in case of designing and developing the products, systematization design method is very useful for the standardization of the developed goods, compatability, the reduction of construction time and price. In this paper, we presented the analogical algorithms of systematization design using similarity theory, design factors and processing method of the restriction factors. Also, we analyzed the output voltage in terms of input voltage and displacement as choosing a differential transformer as the model.