• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.406-409
• /
• 2006

Serviceability resign is required to control the cracking at the joint of precast decks having longitudinal prestress in continuous composite bridges. Especially, details of twin girder bridges are complex not only due to main reinforcements and transverse prestress for the resign of long-span concrete slabs but also due to shear pockets for obtaining the composite action. This paper suggests the design guidelines for the magnitude of the effective prestress and for the selection of filling materials and their requirements in order to use precast decks for twin-girder continuous composite bridges. The necessary initial prestress was also evaluated through the long-term behavior analysis. From the analysis, existing design examples were revised and their effectiveness was estimated. When a filling material having bonding strength higher than the requirement is used in the region of high negative moment, uniform configuration of longitudinal prestressing steels along the whole span length of continuous composite bridges can be achieved resulting in simplification of details and enhancement of the construction costs.

• 한국농촌건축학회논문집
• /
• 제1권3호
• /
• pp.27-34
• /
• 1999

The purpose of this study was to provide basic information on the rural house planning through the research on the use of the standard plans, architectural characteristics, importance of the planning points and housing satisfaction of the residents. 25 rural households scattered around Chungchong provinces-south and north- were surveyed for this study through the questionnaire method. The results of this study were as follows. The importance considered first was the low construction costs, and therefore the standard plans were not fully acknowledged and commonly used. Most real plans are the single-floor houses with 3 rooms, having 25-30 pyong magnitude. The planning points stressed highly were the storage space, convenience of the plan and size of the living room. Housing satisfaction level was high on direction of the facade, size of the living room and position of the bath/washing room, but low for the storage space.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.578-583
• /
• 2000

We introduce the systematization design method using analogical analysis. The design method can make us predict the characteristic experiment for the magnitude we desire as the expression equation applied continuously. We can induce the design sample the users demand with the verification of the data on optimum design previously. Therefore in case of designing and developing the products systematization design method is very useful for the standardization of the developed goods compatability the reduction of construction time and price. In this paper we present the analogical algorithms of systematization design using similarity theory design factors and processing method of the restriction factors. Also we analyze the output voltage in terms of input voltage and displacement as choosing a differential transformer as the model.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.99-105
• /
• 2008

Southern exposure test specimens were used to evaluate corrosion performance of epoxy-coated reinforcing bars in chloride contaminated concrete by electrochemical impedance spectroscopy method. The test specimens with conventional bars, epoxy-coated bars and corrosion inhibitors were subjected 48 weekly cycles of ponding with sodium chloride solution and drying. The polarization resistance obtained from the Nyquist plot was the key parameter to characterize the degree of reinforcement corrosion. The impedance spectra of specimens with epoxy-coated bars are mainly governed by the arc of the interfacial film and the resistance against the charge transfer through the coating is an order of magnitude higher than that of the reference steel bars. Test results show good performance of epoxy-coated bars, although the coatings had holes simulating partial damage, and the effectiveness of corrosion-inhibiting additives. The corrosion rate obtained from the impedance spectroscopy method is equivalent to those determined by the linear polarization method for estimating the rate of corrosion of reinforcing steel in concrete structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1442-1445
• /
• 2003

In precision machinery industry, it's required with small size and low noise design to using in constant liquid delivery equipment. To accomplish it's purpose, we designed the check valve with rubber sheet of circle shapes as a possible assembly in pump body. The test equipment for piezoelectric pump was able to test pressure-flow property and output property of piezoelectric pump by variation(magnitude of voltage and frequency) of input power.

• Steel and Composite Structures
• /
• 제5권1호
• /
• pp.1-15
• /
• 2005

Important characteristics of the previously proposed reduced stiffness method and a summery of its design curves for the buckling of the axially loaded sandwich cylindrical shells is presented. Comparison of the lower bound obtained with FEM analysis with that from the reduced stiffness analysis shows that the proposed reduced stiffness method can provide safe lower bounds for the buckling of geometrically imperfect, axially loaded sandwich cylindrical shells. One of the attractive features of the reduced stiffness elastic lower bound analysis is that it provides safe estimates of buckling loads that do not depend on the specification of the precise magnitude of the imperfection spectra. As a result, designers can readily apply this method without being worried about possible geometrical imperfections that might be generated during fabrication and construction of sandwich cylindrical shells.

• 화약ㆍ발파
• /
• 제14권4호
• /
• pp.4-12
• /
• 1996

본 논문은 10월 29일 서울교육문화원 강당에서 한화가 주최한 바 있는 제1회 한화 기술 심포지움에 초청강사로서 발표한 내용을 요약한 것이다.

• 동력기계공학회지
• /
• 제5권4호
• /
• pp.61-66
• /
• 2001

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electric field, and this phase-change typically manifests itself as a many-order-of magnitude change in the rheological behavior. This paper presents experimental results on material properties for an ER fluids of arabic gum components subjected to electrical fatigues. As a first step, ER fluids are made of arabic gum 25% of particle weight-concentration. Following the construction of test mechanism for estimated durability of ER fluid, the dynamic yield stress, shear stress and current density of the ER fluids are experimentally distilled as a function of DC electric field. The durability estimation of operated ER fluids are distilled and compared with those of unused ER fluids. In addition, the surface roughness of the employed electrode for copper and aluminum are evaluated as a function of the number of the electric-field cycles.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.25-28
• /
• 2007

Precise digital elevation model (DEM) is an important issue in coastal area where DEMs in a time series are especially required. Although LIDAR system is useful in coastal regions, it is not yet popular in Korea mainly because of its high surveying cost and national security reasons. Recently, precise coastal DEM have been made using radar interferometry, waterline method. One of these methods, Spaceborne imaging radar interferometry has been widely used to measure the topography and deformation of the Earth. We acquired ALOS PALSAR FBD mode (Fine Beam Dual) data for evaluating the quality of interferograms and their coherency. The purpose of this study is construction of DEM using the ALOS PALSAR data using radar interferometry and analysis of surface characteristics by coherence and magnitude map over the Ganghwado and Siwha tidal flats and near coastal lands.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.770-773
• /
• 2006

In order to remove the whine noise which has high frequency spectrum related to the uniform tinning space in concrete pavements, randomization study of the tinning space has been done. One of the random tinning space proposed by the authors in the previous study has been applied to the certain region of tile Daegu-Pohang high way construction. In this study, the vehicle interior noise and vibration have been measured in the proposed random tinning road and compared with the data measured in the uniform tinning road. The results show that the magnitude of the peak spectrum is decreased by 18dB(A), and the overall noize level decreased by 4dB(A).