• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.2
• /
• pp.19-26
• /
• 2010

The typical trunk lid system for vehicle is composed of a hinge having 4-bar link and gas lifter. Here, the energy regenerative brake of hydraulic driven systems is applied to the tail gate system for vehicle and removed the gas lifter. The new tail gate system is composed of a hydraulic pump by electric motor, a hydraulic motor, four check valves, an accumulator, a relief valve and a directional control valve. The dynamic characteristics of the hydraulic motor system, such as the surge pressure and response time, are investigated in both brake action and acceleration action. The capacity selection method of accumulator by mathematical model is based upon trial and error approach and computer simulation by AMEsim software is carried out.

• Journal of Drive and Control
• /
• v.5 no.1
• /
• pp.11-16
• /
• 2008

자동차 부품은 주행 중 전후, 좌우, 상하방향의 병진 운동과 각 축에 대한 회전 운동 등 6자유도의 운동을 받는다. 이와 같은 운동에 따라 자동차에 탑재되는 운전석(cockpit), 의자(seat), 연료탱크, 라디에이터, FEM(front end module) 등의 부품 및 모듈 등은 6자유도 운동을 받으면서 각 부품의 기능을 수행하고 있다. 따라서 이들 부품을 짧은 시간 내에 개발하기 위해서는 가속내구시험평가가 필수적인데 이를 위해 유압식 6자유도 가진 테이블을 이용한 기술이 활용되고 있다. 본 해설에서는 자동차 부품 및 모듈의 내구성능 평가 과정과 함께 유압식 6자유도 가진 테이블을 보유하고 관련 부품의 진동내구성능을 평가하고 있는 군산대학교 자동차부품기술혁신센터(KATIC)의 시험 평가장비 및 사례를 기술하였다. 이와 같은 자동차 부품 내구성능평가 방법과 6자유도 가진 테이블을 이용한 시험은 향후 자동차부품 및 일반기계부품 개발업체에서 내구성능향상을 위하여 활용도가 더욱 증대될 것이다.

• Journal of Drive and Control
• /
• v.10 no.1
• /
• pp.7-13
• /
• 2013

Port size 80mm or above large-flow type solenoid valves are extensively used in dust collector and power plants. These multi-stage solenoid valve have few problem. first, multi-solenoid valves are almost depend on imports and there are weak in the brine environment and the low energy efficiency. Because these problem, increased the necessity of research on the development of large flow and high pressure type solenoid valves. In this study, describe the design method of multi-stage solenoid test bench and confirm the influence valve performance on several parameter such as diaphragm orifice diameter. At first, each part has modeled by AMESim simulation tool and combining them. This AMESim virtual multi-stage solenoid valve found influence valve performance on the valve parameter. Finally developed the multi-stage solenoid valve and verified that performance on experimental result.

• Journal of Drive and Control
• /
• v.10 no.1
• /
• pp.14-20
• /
• 2013

In the high rotational speed and pressure state, the leakage flow rate of the axial piston pump is one of the serious problems and make great reasons to decrease the volume efficiency. In this study, tribology characteristics is clarified for the hydrostatic slipper bearing in the swash plate type axial piston pump, by means of theoretical analysis for the different shape of the hydrostatic slipper bearing. It was analyzed by Mathcad software and used equal conditions at $0^{\circ}$ swash plate angle in each model. The results show that performance characteristics of the swash plate type axial piston pump are significantly influenced by the shape of the hydrostatic slipper bearing.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2019

Bucket trajectory is crucial regarding precision work with an excavator. In general, the bucket trajectory deviation is determined by the machining deviation of the frame, driving deviation of the driving hydraulic cylinder, clearance in the joints, and deformation of the structure. This paper investigated the relationship between the respective clearance in joints and the trajectory deviation of the bucket at the finishing work of the ditching for a 20-ton excavator. As a result, the larger the clearance, the larger deviation is increased at trajectory. However, it was found that the deviation of the rotation angle and displacement of the bucket was limited and the size of clearance does not affect closely on the contact angle of the pin shaft.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.138-148
• /
• 1988

In this paper, it is focused on the design of the FEP system that executes the access control programs instead of the hos processor. And so the FEP system improves the network flexibility and redues the installation costs of network. The design criterion of the FEP system is based on the ISDN construction which presents the information channel in thr future information society. The proposed hardwares and transmission softwares use the basic transmission rate of 64Kbps, and the contents of file service throuth this FEP system are listed by FTAM services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.526-534
• /
• 2005

This paper presents the structure and function of the system which automatically generates embedded processor cores using the SMDL. Accepting processor description in the SDML, the proposed system generates the processor core, consisting of the pipelined datapath and memory modules together with their control unit. The generated cores support muti-cycle instructions for proper handling of memory accesses, and resolve pipeline hazards encountered in the pipelined processors. Experimental results show the functional accuracy of the generated cores.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.1
• /
• pp.6-11
• /
• 2004

The single phase switched reluctance motor (SRM) has many merits; simple structure and driving circuits, easy operation and speed control, and etc. This paper presents the torque characteristics of disk type single phase SRM by changing the salient pole lengths and pole arcs. The prototype single phase SRM has a three dimensional magnetic flux pattern because of its structure. That is, the radial and axial magnetic flux contributes to torque generation. Thus, 3D analysis is required for computation of its magnetic field. In this paper, 3D FEM is used for analyzing the magnetic flux distribution and magnetic co-energy.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.187-192
• /
• 1998

Recent construction method in mass concrete structures would depend on the control of hydration heats and thermal stresses by using the low heat cement, optimized block size and a lift height, or both. This experimental study aims at the possibility of thermal cracks according to the different types of cementations material and at the investigation of these effects. Four different types of cements are applied to the mock-up test and are evaluated in terms of temperature rises and thermal stresses with the use of thermocouples, strain gauges and effective stress gauges. As a result of this study, it was found that stresses measured from effective stress gauges agree well with ones form strain gauges, and the trend of stress occurrence can be well evaluated from theoretical analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.205-210
• /
• 1998

The strength and dimension of recent constructed subway box structures are increased considerably. These increases are resulting in much initial cracks by hydration heat and thermal stress. According to previous studies, decrease of cement amount by using superplasticizer and L/H value is the best way to eliminate hydration heat and stress. The analyses using finite element model were performed. By the result of analysis, the use of superplasticizer and the decrease of the change of longitudinal placing length are proved to be more effective for elimination thermal cracks. By ACI Code, for longitudinal placing length 25 m, the amount of wall temperature reinforcement is always lack despite of concrete mix proportion. With analytical result and the inducing crack joint, the in-site test were performed and the analytical results proved to be effective. However, the inducing crack joint is not effective if it is a small size.