• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.581-589
• /
• 2004

This paper compares the fatigue behaviors of concretes subjected to flexural and split-tensional loadings, and proposes the fatigue reliability models based on experimental results and reliability analysis. The fatigue tests were performed for the specimens of $150 mm{\times}75 mm$ split tensional cylinders and $150 mm{\times}150 mm{\times}550 mm$ flexural beams under constant loadings at three levels (70, 80 and $90\%$) with 0.1 stress ratio, 20 Hz loading speed and sine wave. The reliability analysis on fatigue data was based on Weibull distribution of two-parameters. From fatigue test results, two criteria were proposed to reject the experimental fatigue data because of statistical variation of concrete fatigue data. Two parameters ($\alpha$and u) of Weibull distribution were obtained using graphical method, moment method and maximum likelihood method. The probability density function(P.D.F) and cumulative distribution function(C.D.F) of the Weibull distribution for fatigue life of pavement concrete were derived for various stress levels using parameters, $\alpha$ and u. The goodness-of-fit test by Kolmogorov-Smirnov test was acceptable at $5\%$ level of significance. Based on reliability analysis, a fatigue model for pavement concrete was proposed and compared from existing models.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.386-391
• /
• 2004

This study was performed to investigate change of quality characteristics on traditional dried Persimmons from Sangju varity regions (sun-dried, Namjang and Bokryong). Moisture contents on drying were decreased and constant at from 7th to 14th days drying periods and its periods were recognized to constructing second peel of dried persimmons. Constructed second peel were affected on quality characteristics of traditional dried Persimmons. Also, in case of semi-dried persimmons were processed at 45∼55% level of moisture content. Final products of semi -dried persimmons were estimated in 25th from initial drying periods. Changes of water activity were increased reducing speed at time of water content decreased, second feel constructing during drying persimmons were introduced to decreasing of water activity. Weights of dried Persimmons were quickly decreased in 21th drying periods and slowly decreased after that time. Weight changing and water evaporation of dried persimmons at the Namjang and Bokryong were slowy decreased and controled after 7∼14th in periods of constructing second feel of dried persimmons. Change of brix in dried persimmons have had in 18∼27% value at initial drying periods and quickly increased after 7∼14th in drying periods and have in high value of 40∼50% at 21th drying periods. At the texture of dried persimmons, hardness were decresed after 7∼14th in periods and effected on decreasing of water content, increasing of drying times. Sensory score of dried persimmons were highest score of color, sweetness and texture at dried persimmons of Namjang. Score of astringency, sourness and mold smell were highest at dried persimmons of Bokryong. Value of highest overall acceptance score was at dried Persimmons of Namjang.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.234-238
• /
• 2015

The separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction was compared by the methanol and formamide extraction. The model coal tar fraction comprising four kinds of NHC (NHCs : quinoline, iso-quinoline, indole, quinaldine) and three kinds of bicyclic aromatic compound (BACs : 1-methylnaphthalene, 2-methylnaphthalene, dimethylnaphthalene), biphenyl and phenyl ether was used as a raw material. The aqueous solution of methanol and formamide were used as solvents. A batch-stirred tank was used as the raw material - a solvent contact unit of this work. Independent of the solvent used, the distribution coefficient of NHCs sharply increased by decreasing the initial volume ratio of water to the solvent and increasing the equilibrium operation temperature, whereas, the selectivity of NHCs in reference to BACs decreased. Decreasing the initial volume ratio of solvent to feed resulted in deteriorating distribution coefficients, but the selectivity of NHCs in reference to BAC was almost the constant. The distribution coefficient of NHCs by the methanol extraction was 3~5 times higher than that of NHCs by the formamide extraction, inversely, the selectivity of NHCs based on BACs by the formamide extraction was 3~7 times higher than that of NHCs by the methanol extraction. Furthermore, two different solvent extraction methods by adding the extraction processing speed to the balance between solvency and selectivity of NHCs were compared.

• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.856-861
• /
• 1988

A new method developed for simultaneous purification of enterotoxin A and C from Staphylococcus aureus strain L 350/1 consisted of chromatography on carboxymethyl (CM)-cellulose using a buffer of variable pH, gel filtration on Ultro gel, and fast protein liquid chromatography(FPLC) using a buffer of variable pH. The enterotoxin A and C were purified by three steps: batchwise adsorption from culture supernatant on Amberlite CG-50; chromatography on CM-cellulose using a buffer of constant pH and molarity; and gel filtration on Sephadex G-75. The purified enterotoxin appeared homogeneous by gel diffusion and polyacrylamide gel electrophoresis. Upon treatment with CM-cellulose using a elution of variable pH, enterotoxin A and C were so close that they were not separated completely. After elution from gels, the enterotoxins appeared as a single peak at the same position. Gel filtration gave a reaction of complete identity to enterotoxin A and C in Ouchterlony immunodiffusion. In FPLC using a CM-cellulose, enterotoxin A and C were simultaneously separated at pH 8.6 and 6.8. When each fraction was performed to gel immunodiffusion, at peak of enterotoxin A and C were not detected each other. In a method of elution by pH-gradient was to be more efficient as a simultaneous separation method in terms of speed, yields and simplicity. The purified toxin A and C were identical to type A and C reference enterotoxin on both disc electrophoresis and Ouchterlony gel diffusion.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.215-223
• /
• 1997

The advantages of service in satellite links are representatively a long distance and large capacity transfer and simultaneous communication. And terrestrial links are of high speed and high quality data transfer Therefore a combined form of characteristics of satellite and terrestrial links is desirable to furnish a good quality service to subscribers. And in satellite links an analysis method and a simulation method of file transfer are conducted to evaluate the efficiency of file transfer. The parameters are used the message length and transmission time, and the number of chain record and transmission time. From the results of evaluation, in satellite links, it is found that when the message length is shorter than 512 bytes, the file transmission time becomes extremely long and when the message length is set at 1024 bytes, the file transmission time abruptly increase from 2048 bytes. Also it is confirmed that when the number of chain record is under 15, the file transmission time becomes extremely long and if the number increase up to 90,the time becomes gradually short and over 90,it becomes constant.Therefore,from the result of file transmission in th case of utilizing satelite links,it is confirmed that the optimum message length in the minmum transmission time is present closely at 1024 bytes.Also it is confirmed that when the satelite transmission sped becoms smaller from 24kbps to2400bps,the optimum message length also becomes smaller from 640 bytes to 256bytes.

• Journal of the Korean earth science society
• /
• v.28 no.7
• /
• pp.857-870
• /
• 2007

The structure and evolution of a thunderstorm outflow in two dimensions with no environmental wind are investigated using a cloud-resolving model with explicit liquid-ice phase microphysical processes (ARPS: Advanced Regional Prediction System). The turbulence structure of the outflow is explicitly resolved with a high-resolution grid size of 50m. The simulated single-cell storm and its associated Kelvin-Helmholtz (KH) billows are found to have the lift stages of development maturity, and decay. The secondary pulsation and splitting of convective cells resulted from interactions between cloud dynamics and microphysics are observed. The cooled downdrafts caused by the evaporation of rain and hail in the relatively dry lower atmosphere result in thunderstorm cold-air outflow. The outflow head propagates with almost constant speed. The KH billows formed by the KH instability cause turbulence mixing from the top of the outflow and control the structure of the outflow. Ihe KH billows are initiated at the outflow head, and pow and decay as moving rearward relative to the gust front. The numerical simulation results of the ratio of the horizontal wavelength of the fastest growing perturbation to the critical shear-layer depth and the ratio of the horizontal wavelength of the billow to its maximum amplitude are matched well with the results of other studies.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.147-154
• /
• 2007

Network topology in ad hoc networks keeps changing because of node mobility and no limitation in number of nodes. Therefore, the scalability of routing protocol is of great importance, However, table driven protocols such as DSDV have been known to be suitable for relatively small number of nodes and low node mobility, Various protocols like FSR, OLSR, and PCDV have been proposed to resolve scalability problem but vet remain to be proven for their comparative superiority for scalability, In this paper, we compare and amine them by employing various network deployment scenarios as follows: network dimension increase's while keeping node density constant node density increases while keeping network dimension fixed, and the number of sessions increase with the network dimension and the number of nodes fixed. the DSDV protocol showed a low scalability despite that it imposes a low overhead because its convergence speed against topology change is slow, The FSR's performance decreased according to the increase of overhead corresponding to increasing number of nodes, The OLSR with the shortest convergence time among them shows a good scalability, but turned out to be less scalable than the PCDV that uses a clustering because of its relatively high overhead.

• Atmosphere
• /
• v.25 no.2
• /
• pp.221-233
• /
• 2015

Pollen is closely related to health issues such as allergenic rhinitis and asthma as well as intensifying atopic syndrome. Information on current and future spatio-temporal distribution of allergenic pollen is needed to address such issues. In this study, the Community Multiscale Air Quality Modeling (CMAQ) was utilized as a base modeling system to forecast pollen dispersal from oak trees. Pollen emission is one of the most important parts in the dispersal modeling system. Areal emission factor was determined from gridded areal fraction of oak trees, which was produced by the analysis of the tree type maps (1:5000) obtained from the Korea Forest Service. Daily total pollen production was estimated by a robust multiple regression model of weather conditions and pollen concentration. Hourly emission factor was determined from wind speed and friction velocity. Hourly pollen emission was then calculated by multiplying areal emission factor, daily total pollen production, and hourly emission factor. Forecast data from the KMA UM LDAPS (Korea Meteorological Administration Unified Model Local Data Assimilation and Prediction System) was utilized as input. For the verification of the model, daily observed pollen concentration from 12 sites in Korea during the pollen season of 2014. Although the model showed a tendency of over-estimation in terms of the seasonal and daily mean concentrations, overall concentration was similar to the observation. Comparison at the hourly output showed distinctive delay of the peak hours by the model at the 'Pocheon' site. It was speculated that the constant release of hourly number of pollen in the modeling framework caused the delay.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.929-935
• /
• 2014

This paper is study on the pressure monitoring system(PMS) for ship's engine performance analysis( SEPA) based on web, with high speed and accuracy. This system is composed of pressure sensor, monitoring module with multi channel A/D converter, TCP/IP and satellite internet communication system. Existing domestic products measure cylinder pressure when piston of first explosive cylinder reached TDC(the top dead center) point and then measure next cylinder pressure manually each angle divided by a constant rotating interval. But presented system monitors in the local and web computer, using pressure information transmitted from pressure sensor installed on each engine. In this system, it is possible to increase the accuracy of the engine performance analysis because not only each TDC points but cylinder pressures synchronized with the TDC points could be measured in real time, accurately. And therefore, it may be used in a various diagnosis of main engines, such as deviations of each cylinder maximum pressures(Pmax) and the TDC firing positions and combustion conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.972-978
• /
• 2009

In order to achieve color constancy, this paper proposes a method that can detect an invariant direction that affects formation of an intrinsic image significantly, using eigenvector in the $\chi$-chromaticity space. Firstly, image is converted into datum in the $\chi$-chromaticity space which was suggested by Finlayson et al. Secondly, it removes datum, like noises, with low probabilities that may affect an invariant direction. Thirdly, so as to detect the invariant direction that is consistent with a principal direction, the eigenvector corresponding to the largest eigenvalue is calculated from datum extracted above. Finally, an intrinsic image is acquired by recovering datum with the detected invariant direction. Test images were used as parts of the image data presented by Barnard et al., and detection performance of invariant direction was compared with that of entropy minimization method. The results of experiment showed that our method detected constant invariant direction since the proposed method had lower standard deviation than the entropy method, and was over three times faster than the compared method in the aspect of detection speed.