• 제목/요약/키워드: constant pressure test

검색결과 391건 처리시간 0.024초

상재하중의 크기와 이격거리에 따른 강성벽체의 토압분포 (Earth Pressure on a Rigid wall due to Loads Condition and Distance)

  • 오범진;이상덕
    • 한국지반공학회논문집
    • /
    • 제26권12호
    • /
    • pp.51-60
    • /
    • 2010
  • 자중에 의한 토압은 일반적으로 깊이에 따라 선형비례하여 증가되지만, 상재하중에 의해 발생되는 토압은 분포형태와 지반상태 및 경계조건에 따라 다르게 분포한다. 본 연구에서는 변위가 구속된 강성벽체에 연직상재하중에 의한 토압분포를 실험적으로 연구하기 위하여 실내모형토조[30 cm(폭) ${\times}$ 110 cm(길이) ${\times}$ 88 cm(높이)]에 각 2개의 로드셀이 배치된 8개의 토압판으로 구성된 강성벽체를 설치하여 연직상재하중의 크기와 위치(벽체에서 이격거리)를 변화시켜 가면서 토압분포와 토압의 영향범위를 관찰하였다. 실험결과, 연직상재하중에 의해 발생되는 수평토압은 일정위치에서 최대값을 보이고 깊어질수록 감소하여 한계깊이를 초과하면 무시할 만큼 작아졌다. 수평토압이 최대가 되는 깊이와 한계깊이는 연직상재하중의 크기와는 무관하게 벽체와의 이격거리에 따라 다르게 나타났다.

초음파 음속 및 경도법에 의한 발전소 고온배관재의 크리프 손상평가 (Creep Damage Evaluation of High-Temperature Pipeline in Power Plant by Using Ultrasonic Velocity Measurement and Hardness Test)

  • 허광범;유근봉;조용상;이상국
    • 한국해양공학회지
    • /
    • 제13권3호통권33호
    • /
    • pp.92-99
    • /
    • 1999
  • High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in load bearing structures of pressurized components operationg at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damgage have been used. So far, the replica method is mainly used for the inspection of high temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or intergranular microcracks were carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation was analyzed. As a result of ultrasonic tests for crept for specimens, we founded that the sound velocity was decreased as increase of creep life fraction(${phi}c$) and also, confirmed that hardness was decreased as increase of creep life fraction(${phi}c$).

  • PDF

유동저항 감소유체를 운반유체로 한 파라핀 슬러리의 대류 열전달에 관한 연구 (Convective Heat Transfer of a Paraffin Slurry in a Drag Reducing Carrier Fluid)

  • 정동주;최은수
    • 설비공학논문집
    • /
    • 제13권12호
    • /
    • pp.1275-1281
    • /
    • 2001
  • Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.

  • PDF

통합연료필터의 저온유동성 시험장치 핵심기술개발 (Core Technology Development of Low Temperature Fluidity Test System with Composited Fuel Filter)

  • 윤석창;조상;윤달환
    • 전기전자학회논문지
    • /
    • 제18권3호
    • /
    • pp.420-426
    • /
    • 2014
  • 본 연구에서는 저온유동성 성능검사 시스템 구현을 통해 디젤 차량용 통합형 연료필터의 성능을 평가한다. 저온유동성시험 장치의 시험조건은 경유(또는 등유)를 사용하고, 상온, -20 및 $-30^{\circ}C$ 에서 경유공급압력 $3.4kgf/cm^2$, 연료공급량 60 l/H, 설정전류 30 A 및 전압은 $13V_{dc}$를 사용한다. 시료시험으로 통합필터를 지그에 장착하고, 경유(또는 등유)를 일정압력과 유량으로 설정하여 챔버 탱크와 필터에 채운 후, 설정시간 동안 설정온도로 냉각한 후, 필터 전후에 따라 유압과 시동시간, 히터의 소모전류 및 전력을 측정한다.

자율무인잠수정용 UHF-GPS 안테나 설계 및 해석 (Design and Analysis of UHF-GPS Antenna for Autonomous Underwater Vehicles)

  • 박상진;조영준;서동현;박인근
    • 한국항행학회논문지
    • /
    • 제26권6호
    • /
    • pp.464-473
    • /
    • 2022
  • 본 논문에서는 자율무인잠수정에 사용되는 UHF-GPS 안테나의 성능을 만족하는 경량화 설계에 대해 제안하였다. 설계 프로세스에 사용된 구조해석, 수밀외압시험 그리고 비파괴 검사는 수중운용 환경에서 발생하는 외력에 대한 구조 안전성을 고려하여 결정하였다. 먼저 수상에서 모함과 통신을 위한 UHF-GPS 안테나 성능과 수중 운용 시 발생하는 20 bar 압력을 고려한 레이돔 재질을 선정하였으며, 전자기장해석 및 구조해석을 수행하여 무게 대비 강도 및 강성이 높고 유전율이 우수한 PA-GF 소재를 선정하였다. 그리고 UHF-GPS 안테나의 요구 중량을 만족하기 위한 레이돔 두께별 전자기장해석 및 구조해석을 추가 수행하였으며, 최종 모델 선정 후 수밀외압시험 및 비파괴 검사를 통해 구조 안전성을 검증하였다.

초임계 영역내 $CO_2$ 냉각 열전달과 압력강하 분석 (Analysis of Heat Transfer and Pressure Drop During Gas Cooling Process of Carbon Dioxide in Transcritical Region)

  • 손창효;이동건;정시영;김영률;오후규
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권1호
    • /
    • pp.65-74
    • /
    • 2004
  • The heat transfer coefficient and pressure drop of $CO_2$(R-744) during gas cooling Process of carbon dioxide in a horizontal tube were investigated experimentally and theoretically. The experiments were conducted without oil in the refrigerant loop. The main components of the refrigerant loop consist of a receiver. a variable-speed pump. a mass flowmeter, an evaporator. and a gas cooler(test section). The main components of the water loop consist of a variable-speed Pump. an constant temperature bath. and a flowmeter. The gas cooler is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus The test section consists of smooth, horizontal stainless steel tube of 9.53 mm outer diameter and 7.75 mm inner diameter. The length of test section is 6 m. The refrigerant mass fluxes were 200 ~ 300 kg/($m^2{\cdot}s$) and the inlet pressure of the gas cooler varied from 7.5 MPa to 8.5 MPa. The main results were summarized as follows : The predicted correlation can evaluated the R-744 exit temperature from the gas cooler within ${\pm}10%$ for most of the experimental data, given only the inlet conditions. The predicted gas cooley capacity using log mean temperature difference showed relatively food agreement with gas cooler capacity within ${\pm}5%$. The pressure drop predicted by Blasius estimated the pressure drop on the $CO_2$ side within ${\pm}4.3%$. The predicted heat transfer coefficients using Gnielinski's correlation evaluated the heat transfer coefficients on the $CO_2$ side well within the range of experimental error. The predicted heat transfer coefficients using Gao and Honda's correlation estimated the heat transfer coefficients on the coolant side well within ${\pm}10\;%$. Therefore. The predicted equation's usefulness is demonstrated by analyzing data obtained in experiments.

충격파치료를 이용한 상부 등세모근의 근막통증증후군 치료 (Extracorporeal Shock Wave Therapy for Myofascial Pain Syndrome of Upper Trapezius)

  • 이중호;정강훈;박영한
    • 대한물리의학회지
    • /
    • 제7권2호
    • /
    • pp.183-190
    • /
    • 2012
  • Purpose : The purpose of this study was to evaluate whether extracorporeal shock wave therapy (ESWT) is an effective treatment for myofascial pain syndrome (MPS) of upper trapezius. Methods : Study subject were 20 patients (7 male and 13 female). The patients were evaluated by assessing of pain and function using visual analog scale (VAS) and pressure pain threshold (PPT) and Constant-Murley scale (CMS). Statistical analysis was used paired T-test to know significance probability between pre-test and post-test. Results : There was no statistical significance in the change in PPT. But, VAS scores were significantly improved after ESWT (p<.05). Using the Constant-Murley score, this study showed a significant decrease in pain and a significant increase in range of motion of shoulder (p<.05). Conclusion : These results indicate that extracorporeal shock waves therapy could be considered as an effective and efficient treatment modality for myofascial pain syndrome of upper trapezius.

일정변형속도(CRS) 압밀시험에 의한 팽창지수 산정 특성 (The Characteristic of Swelling Index Evaluated by CRS Consolidation Test)

  • 한상재;김수삼;김병일;이응준
    • 한국지반공학회논문집
    • /
    • 제19권5호
    • /
    • pp.311-317
    • /
    • 2003
  • 일정변형속도 압밀시험(CRS)을 이용하여 점성토의 팽창지수 산정 특성을 조사하였다. CRS압밀시험에서 재하단계의 변형률은 0.05%/min와 0.03%/min을 적용하였으며, 재하단계에서는 재하단계의 변형속도의 1/1, l/5, 1/10, 1/15에 해당하는 변형속도를 적용하였다. 표준압밀시험과 비교하여 팽창지수를 산정한 결과 1/5∼1/10정도의 변형속도를 적용했을 때 서로 유사한 팽창지수가 산정되었다. 또한, 유효응력과 과잉간극수압비의 관계에서 교차점이 존재함을 알았으며 이 교차점을 기준으로 변형속도에 의존적인 부분과 비의존적인 부분이 존재함을 알 수 있었다.

준설매립토지반의 압밀침하량 예측 (Prediction of Consolidational Settlement of Dredged and Reclaimed Ground)

  • 유남재;박병수;정길수
    • 산업기술연구
    • /
    • 제21권A호
    • /
    • pp.317-327
    • /
    • 2001
  • For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation test were also used to fine its relation at ranges of relatively low void ratio. Results of column test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. Consolidational settlement in dredged and reclaimed ground, where the consolidation was in progress, was predicted by using the numerical technique implemented with the finite strain consolidation theory.

  • PDF

TDR 측정시스템이 도입된 압력판 추출 시험기를 이용한 흙-함수특성곡선 연구 (Soil Water Characteristic Curve Using Volumetric Pressure Plate Extractor Incorporated with TDR System)

  • 정영석;사희동;강성훈;오세붕;이종섭
    • 한국지반공학회논문집
    • /
    • 제31권8호
    • /
    • pp.17-28
    • /
    • 2015
  • 흙-함수특성곡선에 대한 선행 연구결과들의 경우, 정량적으로 간극수 유출입량을 측정하여 모관흡수력에 따른 체적함수비를 산정하였다. 본 연구에서는, 압력판 추출시험기(VPPE)에 Time Domain Reflectimoetry(TDR) 측정 시스템을 도입하여 불포화토의 건조과정 및 습윤과정 진행에 따른 유전상수를 측정하여 체적함수비를 산정하고자 하였다. 압력판 추출 시험기는 압력셀, 압력조절장치, 뷰렛 시스템, TDR 프로브로 구성된다. 압력셀에 초기 간극비가 다른 두 시료를 조성한 후, 압력조절장치를 이용하여 압력셀 내부에 0.1kPa - 50kPa 범위의 공기압을 가하여 모관흡수력을 조절하였다. 그리고 뷰렛시스템을 이용하여 모관흡수력 변화에 따른 시료의 체적함수비 변화를 측정하였다. 또한, 압력셀 내부에 설치된 TDR 프로브를 이용하여 프로브 양단에서 발생되는 전자기파의 반사 신호로부터 유전상수를 산정하였다. 주문진 표준사의 체적함수비 변화에 따른 유전상수 측정에 대한 보정으로 도출한 체적함수비와 유전상수관계를 이용하여 시료의 체적함수비를 산정하였다. 실험 결과, 시료의 초기 간극비와 상관없이 TDR 프로브에 의해 산정된 체적함수비는 뷰렛 시스템을 통해 정량적으로 산정된 체적함수비와 매우 유사한 것으로 나타났다. 또한, 건조과정 및 습윤과정 진행에 따라 동일한 모관흡수력에 대한 함수비의 차이가 존재하는 이력현상(Hysteresis)이 발생하였고, 건조과정 및 습윤과정의 반복에 따라 이력현상은 줄어들었다. 본 연구에서 적용된 전자기파의 시간영역반사법(TDR)을 통해 불포화토의 흙-함수특성곡선을 효과적으로 파악할 수 있을 것으로 판단된다.