• 대한전기학회논문지
• /
• 제40권3호
• /
• pp.266-274
• /
• 1991

This paper proposed the resonant DC-DC converter with constant switching frequency. Its output is controlled by the auxiliary switch which is attached in conventional MRC circuits. The average output voltage is equal to the average voltage of the auxiliary switch. If the on time of the auxiliary switch is short, output voltage is decreased. Because of using the multi resonant method, the power loss from the parasitic elements can be decreased. Experimental performance of DF ZVS Forward MRC topology with switching frequency of 1MHz is presented.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.675-684
• /
• 2016

This paper presents a new stand-alone wind-based induction generator system with constant frequency and adjustable output voltage. The proposed generator consists of a six-phase cage-rotor induction machine with two separate three-phase balanced stator windings and a three-phase space vector pulse width modulation inverter that operates as a static synchronous compensator (STATCOM). The first stator winding is fed by the STATCOM and used to excite the machine while the second stator winding is connected to the generator external load. The main frequency of the STATCOM is determined to be constant and equal to the load-requested frequency. The generator output frequency is independent of the load power demand and its prime mover speed because the frequency of the induced emf in the second stator winding is the same as this constant frequency. A sliding mode control (SMC) is developed to regulate the generator output voltage. A second SMC is used to force the zero active power exchanged between the machine and the STATCOM. Some simulation and experimental results are presented to prove the validity and effectiveness of the proposed generator system.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.19-23
• /
• 2005

본 연구의 목표는 안정된 출력과 높은 효율을 갖는 저압 UV램프의 구동시스템을 설계하는 것이다. UV램프 시스템은 반도체공정, 살균 등 그 적용범위가 대단히 넓은 전력설비의 하나이며 고부가가치의 제품을 생산하기 위해서는 출력의 안정화 기술은 필수적이다. 본 연구에서 저압 UV램프의 구동시스템 설계 목표는 변환효율 90[%], 출력안정도 ${\pm}7.5[%]$, 램프출력은 300[W] 이상으로, 연구목표에 상응하는 결과를 얻을 수 있었으며 국내시장 선점에 유리할 것이고, 제품의 생산비를 낮추는 시도를 계속한다면, 수출도 가능할 것으로 예상된다. 또한 부가적인 보호회로가 개발되면, 자외선램프용 전자식 안정기의 신뢰성을 크게 재고시킬 것이다.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.486-492
• /
• 2004

본 논문에서는 기존의 CDMA 시스템에서 다중사용자 데이터 전송에 의해 발생하는 높은 PAPR 문제를 해결하기 위하여 pre-coding 기법을 이용한 2진 constant amplitude CDMA(CA-CDMA) 방식을 새롭게 제안한다. 제안하는 CA-CDMA의 기초인 4-user CA-CDMA 기법은 4명의 사용자에 대해 binary 크기의 신호를 출력하는 시스템이며, 이는 parity 신호를 이용하여 항상 $\pm$2의 크기를 갖고 길이가 4인 신호를 출력한다. Parity 신호는 입력되는 4명의 사용자 신호를 XOR한 신호로써 사용자들의 신호와 함께 전송되므로 별도의 부가채널을 필요로 하지 않으며, 수신단에서 쉽게 복원될 수 있다. 한편, 시스템 사용자 수의 확장은 4-user CA-CDMA를 반복 사용함으로써 이루어질 수 있다. 예로써 16-user의 경우, 4개의 4-user CA-CDMA를 병렬로 배치하고 각각의 4-user CA-CDMA에서 출력되는 신호를 다시 하나의 4-user CA-CDMA에 입력함으로써 쉽게 구현될 수 있다. 이는 각 4-user CA-CDMA의 출력 신호 역시 binary 신호이기에 가능하며, 동일한 방법으로 64-user, 256-user에 대해서도 2진 constant amplitude를 만족하는 출력 신호를 얻을 수 있다. 결국, 본 논문에서 제안하는 CA-CDMA는 코드율이 1이므로 전송속도나 대역폭 변화가 없으며, 항상 constant한 즉, PAPR이 항상 0 ㏈인 신호의 출력하여, 다중 사용자 전송에서도 비선형 HPA에 의한 왜곡을 방지하고 전력효율을 최대화 할 수 있다. 시뮬레이션 성능확인 결과, 기존의 CDMA가 다중 레벨의 크기를 갖는 신호를 출력하는데 반해, 제안된 2진 CA-CDMA는 항상 binary 레벨로서 신호를 출력함을 알 수 있으며, 비선형 HPA를 고려하였을 때 BER(bit error rate)이 크게 증가하는 일반 CDMA와 달리, 제안된 2진 CA-CDMA의 BER은 전혀 변하지 않음을 알 수 있다.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.124-127
• /
• 2016

Humidity calibration for a temperature-stable quartz oscillator (TSQO) was investigated to exclude the influences of relative humidity on the TSQO output in order to use the corresponding devices outdoors. The TSQO output is a voltage that is inversely proportional to the electric impedance of the quartz oscillator, which depends on the viscosity and density of the measured gas. The TSQO output was humidity calibrated using its humidity dependence, which was obtained by varying the relative humidity (RH) from 0 to 100 RH% while other conditions were kept constant. The humidity dependencies of the TSQO output were fit by a linear function. Subtracting the change in the TSQO output induced by the change in humidity, calculated with the function from the experimentally measured TSQO output for a range of 0-100RH%, eliminated the influence of humidity on the TSQO output. The humidity calibration succeeded in reducing the fluctuations of the TSQO output from 0.4-3% to 0.1-0.3% of the average values for a range of 0-100RH%, at constant temperatures. The necessary stability of the TSQO output for application in hydrogen sensors was below one-third of the change observed for a hydrogen leakage of 1 vol.% hydrogen concentration, corresponding to 0.33% of the change in each background. Therefore, the results in this study indicate that the present humidity calibration effectively suppresses the influence of humidity, for the TSQO output for use as an outdoor hydrogen sensor.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.96-100
• /
• 2004

The Nd： YAG laser is commonly used throughout many fields such as accurate material processing, IC marking, semiconductor annealing, medical operation devices, etc., due to the fact that it has good thermal and mechanical properties and is easy to maintain. In materials processing, it is essential to vary the laser power density for specific materials. The laser power density can be mainly controlled by the current pulse width and pulse repetition rate. It is important to control the laser energy in those fields using a pulsed laser. In this paper we propose the constant-frequency current resonant half-bridge converter and monitoring of capacitor charging voltage. This laser power supply is designed and fabricated to have less switching loss, compact size, isolation with primary and secondary transformers, and detection of capacitor charging voltage. Also, the output stabilization characteristics of this Nd： YAG laser system are investigated. The test results are described as a function of laser output energy and flashlamp arc discharging constant. At the energy storage capacitor charges constant voltage, the laser output power is 2.3％ error range in 600[V].

• 한국정보통신학회논문지
• /
• 제21권11호
• /
• pp.2009-2014
• /
• 2017

본 논문에서는 변화하는 루프필터 전압을 시정수 비교기를 사용하여 감지하고, 이의 출력에 따라 루프필터 전압변화를 보상하여 단일 칩으로 구현이 가능한 작은 크기의 위상고정루프를 제안하였다. 제안된 위상고정루프는 기존 구조에서는 안전한 동작이 불가능한 크기인 작은 용량을 가지는 커패시터를 사용하여 칩의 크기를 최소화 하였다. 시정수 비교기는 작은 시정수 값을 가지는 저항, 커패시터와 높은 시정수 값을 가지는 저항, 커패시터를 통과한 신호들을 입력으로 받아 루프필터 출력 전압의 변화를 감지한다. 시정수가 큰 노드의 출력은 루프필터 출력전압의 평균 값을 가지고, 시정수가 작은 노드의 출력은 루프필터 출력전압과 거의 같은 값을 가진다. 각 노드의 차이를 비교하여 나온 출력은 전류 보상기를 제어하여 작은 크기의 루프필터 커패시터를 충 방전 시킨다. 이는 제안된 위상고정루프를 안정하게 동작하도록 한다. 제안된 위상고정루프는 1.8V $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였고, Hspice 시뮬레이션을 통해 회로의 동작을 검증하였다.

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.420-423
• /
• 2020

This study proposes an indirect constant voltage control algorithm for hybrid solid-state transformers (HSSTs) by using primary side information. Considering the structure of HSSTs, measuring voltage and current information on the primary side of a transformer is necessary to control the converter and inverter of the power converter. The secondary side output voltage is measured to apply the conventional secondary side constant voltage control algorithm, and thus, the digital control board requires the same rated insulation voltage as that of the transformer. To solve this problem, the secondary voltage of the transformer obtained from the tap voltage is used. Moreover, output voltage decreases as load increases because the proposed indirect constant voltage control scheme does not consider the cable impedance between the secondary output terminal and the load. This study also proposes a technique for compensating the secondary output voltage by using the primary current of the transformer and the resistance value of the cable. An experiment is conducted using a scale-down HSST prototype consisting of a 660 V/220 V tap transformer. The problem of the proposed indirect constant voltage control strategy and the improvement effect due to the application of the compensation method are compared using the derived experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.557-560
• /
• 2005

This paper considers a global asymptotic output tracking problem with a prescribed constant reference signal for a class of single-input and single output-output nonlinear systems. It is shown that under some mild conditions on such a system there is a smooth output feedback achieving global asymptotic output tracking and such a smooth output controller is explicitly constructed by a new design method proposed. The usefulness of our result is illustrated by a numerical example.

• 전기학회논문지P
• /
• 제56권2호
• /
• pp.83-89
• /
• 2007

The LC filter design procedure of the inverter output filter is described. The transfer function of the filter output voltage to the load current is described with the capacitor value and the system time constant considering the system controller. By using the closed form of the relation between the filter capacitor value and the system time constant, the capacitor value can be calculated with the given system time constant and vice versa. It is more practical for the implementation of power and control circuit of inverter. And as the effect of the load current to the voltage distortion can be calculated from the closed form, it is possible to analyze the system how much the voltage waveform is distorted in case of the nonlinear load. All the proposed design procedure is verified with the simulation and experimental results.