• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.147-152
• /
• 1999

Semiconductor piezoresistive type vibration sensor was fabricated by using semiconductor process and micromachining technology. To measure the micro electromagnetic force between coil and magnet, fabricated vibration sensor was used. Toapply micro electromagnetic force produced from the micro exciter, small-sized NdFeB permanent magnet was attached on the mass of the fabricated vibration sensor. The measured electromagnetic force are about 5~180dyne when the applied sinusoidal current of 1KHz in the range of 1.5~8mA. The measurement of micro electromagnetic forcewas performed by changing the distance between coil and magnet. Output characteristics of micro electromagnetic force according to the applied coil current were linear. Furthermore, output results were used to get the transfer constant that is important to decide the efficiency and the performance of the coil and magnet.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.605-607
• /
• 2001

In this paper, an off-tine UPS with CVT(constant voltage transformer) is designed and the experimental result and problems of the designed UPS is given and discussed. This off-line UPS consists of triple-port CVT and PWM inverter which acts as charger and inverter. It can be evaluated in low price because haying simple structure. It offers high performance because CVT restricts the short current automatically about two or three times of rated current, has nearly unit power factor and constant output voltage to varying input voltage. The weak points of this UPS are that the output voltage waveform is not perfect sinusoidal and has phase difference to input voltage. The experimental result and problems of the designed UPS is given.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.145-153
• /
• 1997

This paper proposes a constant frequency controlled forward zero voltage switching multi resonant converter (ZVS-MRC) which operates with a fixed duty ratio. The proposed converter is obtained from a conventional forward ZVS-MRC by placing a saturable core in parallel with the secondary side of the transformer. Experimental results are presented for a proposed converter which operates at 1.5MHz switching frequency with an output power of 50W (5V/10A). The merits of the proposed converter include ; 1) reduced voltage stress to the main switch compared with the conventional counterpart, 2) ease on designing the magnetic components including EMI and output filter, and 3) simple control scheme.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.579-582
• /
• 1989

The air-cooled waterwheel generator has a fan connected to waterwheel shaft or motor driven fan or fans. The fans are operated at constant speed, constant input, regardless of generator loss which is varied according to generator output and coolant the perature. Energy savings may he possible if the cooling air flow is controlled according to generato output and air temperature depending on season. The simulation and experience have been done on the 22.6 KVA Waterwheel generator by using AC variable speed drive. The results gave us los cut of generator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.652-658
• /
• 2016

In practical control systems differences between nominal and real systems arise from internal uncertainties and/or external disturbances. This paper presents a model-based low-order disturbance observer for a sinusoidal disturbance with unknown constant offset. By using the disturbance model of a biased harmonic signal, the proposed method can successfully estimate the biased sinusoidal disturbance with unknown amplitude and phase but known frequency. At the first stage of the observer design, a model-based disturbance observer is designed when all the system states are measurable. Next, a sufficient condition is presented for the proposed observer to estimate the sinusoidal disturbance with a minimal-order additional dynamics using only output measurement. Comparative computer simulations are performed to test the performance of the proposed method. The simulation results show the enhanced performance of the proposed disturbance observer.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.393-396
• /
• 1990

This paper represented constant voltage power source equipment using voltage fed inverter. This system drived syncronizing power source, charged battery connected to DC side, and constantly maintained regardless of power source voltage variation and load variation. Output made good wave with PWM method and we proved stabile constant voltage output when AC power source is failure.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.761-768
• /
• 2018

In this paper, the performance analysis of a control topology based on the direct output power control (DPC) for robust and inexpensive permanent magnet-assisted synchronous reluctance generator (PMa-SynRG) system is presented. The PMa-SynRG might be coupled to an internal combustion engine running at variable speed. A three-phase PWM rectifier rectifies the generator output and supplies the dc link. A single-phase PWM inverter supplies constant ac voltage at constant frequency to the grid. The overall control algorithm is implemented on a TMS320F2812 digital signal processor board. Simulations results and experimental results verify the operation of the proposed system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.696-705
• /
• 1991

This paper describes the procedures for pre-tuning and re-tuning the gains of PI controller based on output patterns -output error integral- of the unknown process which may not have any information, for example, system order, deadtime, time constant, etc. The key ideas of the proposed adaptive scheme are as follows. The scheme determines the initial gains by using ZNM (Ziegler-Nichols Method) with relay feedback, and then the adaptive algorithms by pattern recognition are introduced for re-runing the PI gains with on-line scheme whenever control conditions are changed. Because, among the various auto-tuning procedures, ANM with relay feedback has the difficulty in re-tuning with on-line and Bristol method has no comment on initial settings and has variables to pre-determine, which makes the algorithm comples, the proposed methods have the combined scheme with above two procedures to recover those problems. And this paper proposes a simple way to determine adaptive constant in Bristol method. To show the validity of the proposed method, an example is illustrated by computer simulation and a laboratory process, heat exchanger, is experimented.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.99-102
• /
• 2001

In this paper, the electronic ballast was developed to control 250W metal halide lamp. To avoid acoustic resonance phenomenon, we calculated the acoustic resonance band and determined the driving frequence to from 70kHz to 100kHz. Due to the switching loss of MOSFET, many problems are caused in the inverter circuit during lighting the lamp, so we have reduced the loss by connecting the capacitor to reduce inrush current In this paper, main research area is to find the methods to operate the Iamp on regulated constant output. After detecting the current I and voltage V of the lamp, we changed the driving frequency by changing the DC voltage level.