• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.513-518
• /
• 2007

A polygon-wise constant curvature natural element approximation is presented in this paper for the numerical implementation of the abstract Kirchhoff plate model. The strict continuity requirement in the displacement field is relaxed by converting the area integral of the curvatures into the boundary integral along the Voronoi boundary. Curvatures and bending moments are assumed to be constant within each Voronoi polygon, and the Voronoi-polygon-wise constant curvatures are derived in a selective manner for the sake of the imposition of essential boundary conditions. The numerical results illustrating the proposed method are also given.

• 수산해양기술연구
• /
• 제34권2호
• /
• pp.200-211
• /
• 1998

Heat transfer performance improvement by fin and groovs is studied for condensation of R-11 on integral-fin tubes. Eight tubes with trapczodially shaped integral-fins having fin density from 748 to 1654fpm(fin per meter) and 10, 30 grooves are tested. A plain tube having the same diameter as the finned tubes is also used for comparison. R-11 condensates at saturation state of 32 $^{\circ}C$ on the outside tube surface coded by inside water flow. All of test data are taken at steady state. The heat transfer loop is used for testing singe long tubes and cooling is pumped from a storage tank through filters and folwmeters to the horizontal test section where it is heated by steam condensing on the outside of the tubes. The pressure drop across the test section is measured by menas pressure gauge and manometer. The results obtained in this study is as follows : 1. Based on inside diameter and nominal inside area, overall heat transfer coefficients of finned tube are enhanced up to 1.6 ~ 3.7 times that of a plain tube at a constant Reynolds number. 2. Friction factors are up to 1.6 ~ 2.1 times those of plain tubes. 3. The constant pumping power ratio for the low integral-fin tubes increase directly with the effective area to the nominal area ratio, and with the effective area diameter ratio. 4. A tube having a fin density of 1299fpm and 30 grooves has the best heat transfer performance.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.450-454
• /
• 2015

본 논문에서는 평면상에 가중치를 가진 점들이 주어질 때, 임의의 상수 r에 대해서 변의 길이 r인 정사각형 영역을 고려해서 이 안에 속하는 점들의 가중치 합이 최대가 되는 영역을 찾고자 한다. 변의 길이가 정해져 있지 않은 경우에 임의의 사각형 영역을 찾는 문제에 대한 연구가 있었다. 본 논문에서는 상수 r이 주어질 때, 변의 길이 r인 정사각형 영역을 찾는 문제를 다룬다. 우리는 동적 환경 하에서의 일차원 문제를 풀고, 이를 이용해서 O(nlogn+rn) 시간 복잡도를 갖는 알고리즘을 제안한다.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.105-111
• /
• 2001

The creep crack growth properties in 3.3NiCrMoV steel were investigated at 55$0^{\circ}C$ by using CT specimen under constant load and constant Ct condition that was held during crack growth of Imm distance. Ct lelied on load line displacement rate, C＊usually increased with crack length though load is reduced in order to maintain constant Ct value as crack growth and appeared scatter band. At constant load and Ct region, crack growth slope was 0.900 and 0.844 each, on the other hand C＊ slope was 0.480. Fully coalesced area(FCA) ahead of crack tip increased as Ct increase to the critical value, and after that value FCA decreased. For the tertiary creep stage of crack growth test, the most of displacement was due to the steady state creep, except only small part due to the primary creep and other effects. Therefore, tests were mainly interrupted in the tertiary stage to obtain high value of Ct.

• 한국정보통신학회논문지
• /
• 제12권11호
• /
• pp.2039-2044
• /
• 2008

FIR 필터, DCT, FFT와 같은 디지털 신호처리 응용에서 다중 고정 계수 곱셈의 효율적인 하드웨어 구현문제에 자주 접하게 된다. 고정계수 곱셈기 설계에서 공통 하위식 제거 알고리즘은 면적과 전력소모를 상당히 개선시킬 수 있는 방법을 제공한다. 본 논문에서는 CSD 계수에서 빈번히 나타나는 두 공통 하위식($10{\bar{1}}$, 101)의 덧셈을 수행하는 전용덧셈기 설계 방법을 제안한다. 제안한 방법을 radix-24 FFT 구조의 고정계수 곱셈블록에 적용한 실험에서 제안한 방법의 면적, 지연시간, 전력소비는 기존방법 보다 각각 21%, 11%, 12% 정도 향상됨을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1901-1903
• /
• 1996

In This paper, to understand statistical properties of breakdown voltage, the experiment is performed on four gaps of different electrode area, ranging from $17.44[cm^2]$ to $1809.5[cm^2]$, in $SF_6$ gas. Statictcial property of breakdown is confirmed Weibull distribution and as area of electrode is increased, breakdown voltage is decreased and converged constant value $E_0$.

• 대한수학회지
• /
• 제44권6호
• /
• pp.1363-1372
• /
• 2007

We investigate the containment measure of one domain to contain in another domain in a plane $X^{\kappa}$ of constant curvature. We obtain some Bonnesen-type inequalities involving the area, length, radius of the inscribed and the circumscribed disc of a domain D in $X^{\kappa}$.

• 대한수학회보
• /
• 제42권1호
• /
• pp.39-44
• /
• 2005

Let M be a compact hypersurface in hyperbolic space and let A be the area of M and V be the volume of the compact domain bounded by M. In this paper, we find a lower bound for $\frac{A}{V}$ in two cases, M has constant scalar curvature and M has constant mean curvature.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.57-69
• /
• 1997

The objetive of this study is to compare the mechanical proprties of 6000 series Al-Mg-Si aluminum alloy (AC120) with 5000 series Al-Mg aluminum alloy (TG25), and to investigate the influence of corrosion solution for fatigue life. Comparing of TG25 and AC120 alloy sheets, TG25 alloy sheets showing higher plastic ratio and total elongation have better formability than AC120 alloy sheets. The hardness of nugget area was a little higher than that of base metal area. Also, grain coarsening was observed in HAZ(Heat Affected Zone). In a corrosion fatigue experiment, the fatigue life decreased as concentration increased, when a dipping time was constant. The life decreased as dippling time increased, when a concentration was constant.

• 설비공학논문집
• /
• 제13권7호
• /
• pp.612-620
• /
• 2001

The optimum design of a heat exchanger with porous media insertion is studied in this paper. It is considered that the aluminum foam metal is inserted in a flat plate channel and air flows through it. The influence of the microstructure of the foam metal on the pressure drop and heat transfer is investigated utilizing previous analytical results and existing correlation equations. Design parameters are identified as the unit-cell size and the ligament thickness of the porous medium, and their effects are examined. The results show that there exists optimum microstructure of the porous media maximizing heat transfer with a constant pressure drop. When the increase in the pressure drop is within a practically acceptable range, the increase in the heat transfer is dominated by the increase in the heat transfer area due to the porous medium insertion. Consequently, among the porous media with a constant pressure drop, the heat transfer is maximized with a microstructure with maximum specific surface area.