• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3274-3297
• /
• 2021

Permission delegation is an important research issue in access control. It allows a user to delegate some of his permissions to others to reduce his workload, or enables others to complete some tasks on his behalf when he is unavailable to do so. As an ideal solution for controlling read access on outsourced data objects on the cloud, Ciphertext-Policy Attribute-Based Encryption (CP-ABE) has attracted much attention. Some existing CP-ABE schemes handle the read permission delegation through the delegation of the user's private key to others. Still, these schemes lack the further consideration of granularity and traceability of the permission delegation. To this end, this article proposes a flexible and fine-grained CP-ABE key delegation approach that supports white-box traceability. In this approach, the key delegator first examines the relations between the data objects, read permission thereof that he intends to delegate, and the attributes associated with the access policies of these data objects. Then he chooses a minimal attribute set from his attributes according to the principle of least privilege. He constructs the delegation key with the minimal attribute set. Thus, we can achieve the shortest delegation key and minimize the time of key delegation under the premise of guaranteeing the delegator's access control requirement. The Key Generation Center (KGC) then embeds the delegatee's identity into the key to trace the route of the delegation key. Our approach prevents the delegatee from combining his existing key with the new delegation key to access unauthorized data objects. Theoretical analysis and test results show that our approach helps the KGC transfer some of its burdensome key generation tasks to regular users (delegators) to accommodate more users.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.119-127
• /
• 2003

In this study we propose an unsteady I-dimensional model of bed combustion with multiple solid phases, which confers a phase on each solid material. This model can be applied to a variety of bed combustion cases of various configurations and ignition methods. It contains fuel combustion, gaseous reaction, heat transfers between each phase, and geometric changes of the solid particles. An iron ore sintering pot is selected for verifying the model validity and simulation results are compared with the limited experimental data set of various coke contents and air supply rates. They predict the experimental results well and show applicabilities to the various system of the fuel bed with various solid materials.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.145-152
• /
• 2010

Bayesian information criterion is used to do clustering for time series data. To acquire more stable clusters, multiple seeds are chosen first for the algorithm. Once clusters being set up, most similar time series data in the cluster to the one under consideration are to be chosen for prediction test. These chosen time series data are used to extract valid Markov rules by which we test the prediction accuracy. We confirmed that clustering with multiple seeds led to better prediction performance.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.2
• /
• pp.57-69
• /
• 1999

The primary objective of this research was to suggest the design dimensions of automotive seating package that has an important effect upon seating package design. To conduct the research, a set of manikin dimensions that are representative for Korean was determined by using a statistical scheme. With these dimensions, we generated nine manikins for male and female, respectively. Also, the preferred driving posture was investigated using the experimental setup. To find each joint angle for subjects, a driving monitoring system was developed and a three dimensional motion analysis system was employed. The joint angle for the subject was established and compared with related literature. With the generated manikins and each joint angle, the driving posture was simulated by using SAFEWORK that is a program to generate manikins. The positions and adjustable ranges from the accelerator heel point to the hip point and the steering wheel center point that are important variables in order to design seating package were suggested. Further research is needed to determine the seating package dimensions three dimensionally.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.4
• /
• pp.36-47
• /
• 1992

In this paper, a set of TM(template matching) mask using the AM(associative mapping) technique was generated and the edge detection algorithm for a SAR image was proposed. And also, the performance of the proposed edge detection algorithm was tested with the conventional edge detection techniques. The proposed edge detection algorithm created an edge image which was more accurate and clear than the conventional edge detection techniques and the performance of the proposed detection technique was not deteriorated for low intensity area in the image because the uncertainly thresholded value genetated by the conventional detection methods was requested. Also, the number of masks and the detection time were reduced by adjusting resolution of edge detection and the consideration for the threshold value extracting the edge was very intuitive.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.201-205
• /
• 1993

A decision-theoretic concept is introduced to investigate whether targets of interest in array sensor systems are present at some steering direction or not. The solutions to this problem are described as a set of simple numbers 0 or 1 corresponding to the direction under consideration. This coded number representation is transplanted in the optimisation technique based on the Hopfield neural network, which may provide a new aspect of determining the direction of arrival (DOA) of sources. To cast the perspectives of the proposed approach and illustrate its effectiveness in source direction finding in array sensor systems, simulation results and related discussions are presented in this paper.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.118-127
• /
• 2015

The power consumption of 3D many-core processors can be reduced, and the power delivery of such processors can be improved by introducing voltage island (VI) design using on-chip voltage regulators. With the dramatic growth in the number of cores that are integrated in a processor, however, it is infeasible to adopt per-core VI design. We propose a 3D many-core processor architecture that consists of multiple voltage clusters, where each has a set of cores that share an on-chip voltage regulator. Based on the architecture, the steady state temperature is analyzed so that the thermal characteristic of each voltage cluster is known. In the voltage scaling and task scheduling stages, the thermal characteristics and communication between cores is considered. The consideration of the thermal characteristics enables the proposed VI formation to reduce the total energy consumption, peak temperature, and temperature gradients in 3D many-core processors.

• Computers and Concrete
• /
• v.14 no.6
• /
• pp.711-725
• /
• 2014

The purpose of this study is to evaluate the behavior and the strength of SRG (Steel Reinforced Grout) externally strengthened Reinforced Concrete (RC) beams by using a nonlinear numerical analysis. The numerical simulation was carried out by using a three-dimensional (3D) finite element model. An interface element with a suitable damage model was used to model the connection between concrete surface and SRG reinforcing layer. The reliability of the finite element 3D-model was checked using experimental data obtained on a set of three RC beams. The parameters taken into consideration were the external configuration, with or without U-end anchorages, the concrete strength, the amount of internal tensile steel reinforcement. Conclusions were made concerning the strength and the ductility of the strengthened beams by varying the parameters and on the effectiveness of the SRG reinforcing system applied with two types of external strengthening configuration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.233-236
• /
• 2005

In this study, the fundamental design procedure for the Smart UAV fuel supply system was set up, and the preliminary design was performed to meet the vehicle system requirements. The fuel system layout was determined through consideration of vehicle system requirements, and then fuel tank layout, design of components such as booster pump, jet pump, pipe, vent system, weight estimation, etc. were carried out.

• Journal of Korea Port Economic Association
• /
• v.21 no.4
• /
• pp.103-119
• /
• 2005

For the selection of attraction industry of foreign investment in the free trade zone of Gwang Yang Bay, an overall consideration should be made considering aspects such as the industry development strategy of Gwang Yang Bay and the regional industry development strategy of the local government. For Gwang Yang Bay to grown into the E-Hub Port of Northeast Asia, the development of the back zone of should be accelerated. There is a need to offer custom made incentives for the core businesses. Packaging is a field of combined science and a future industry. Packaging industry, which has close association with regional industry and regional college's research human resources, should be combined with design and set up a packaging industry complex.