• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.729-736
• /
• 2023

Traditionally, Germany, a conservative welfare state, has pursued a male breadwinner model based on gender division of labor. For a long time, Germany tried to address low fertility through economic support centered on cash benefits, but it was not successful. In 2007, the German government began to shift the paradigm of family policy for work-life balance under the slogan of "A mix of time policy, income transfer, and infrastructure." When the issue of low birth rates emerged as a national concern in Germany, there was a growing social sentiment that not only the government but also private companies should contribute to increasing fertility by providing family-friendly personnel policies and working conditions. Private companies have been voluntarily improving family-friendly working conditions beyond legal obligations, aiming to secure personnel and prevent turnover. Germany's fertility rate is currently rising toward the European average level in 2023, which can be attributed to the government's work-life balance policies and the participation of private companies. In terms of improving work-life balance policies in Korea, it has been proposed to change the perception of the need for fathers to participate in child care, to make parental leave compulsory for men, to guarantee employment for women after childbirth, to expand child care facilities, and to revitalize family-friendly policies in companies.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.248-259
• /
• 2007

The aim of this research was to study the effect of intermittent polymerization on marginal adaptation by comparing the marginal adaptation of intermittently polymerized composite to that of continuously polymerized composite. The materials used for this study were Pyramid (Bisco Inc., Schaumburg, U.S.A.) and Heliomolar (Ivoclar Vivadent, Liechtenstein) . The experiment was carried out in class II MOD cavities prepared in 48 extracted human maxillary premolars. The samples were divided into 4 groups by light curing method: group 1- continuous curing (60s light on with no light off), group 2-intermittent curing (cycles of 3s with 2s light on & 1s light off for 90s); group 3- intermittent curing (cycles of 2s with 1s light on & 1s light off for 120s); group 4- intermittent curing (cycles of 3s with 1s light on & 2s light off for 180s). Consequently the total amount of light energy radiated was same in all the groups. Each specimen went through thermo-mechanical loading (TML) which consisted of mechanical loading (720,000 cycles, 5.0 kg) with a speed of 120 rpm for 100hours and thermocycling (6000 thermocycles of alternating water of $50^{\circ}C$ and $55^{\circ}C$). The continuous margin (CM) (%) of the total margin and regional margins, occlusal enamel (OE), vertical enamel (VE), and cervical enamel (CE) was measured before and after TML under a $\times200$ digital light microscope. Three-way ANOVA and Duncan's Multiple Range Test was performed at 95% level of confidence to test the effect of 3 variables on CM (%) of the total margin: light curing conditions, composite materials and effect of TML. In each group, One-way ANOVA and Duncan's Multiple Range Test was additionally performed to compare CM (%) of regions (OE, VE CE). The results indicated that all the three variables were statistically significant (p < 0.05). Before TML, in groups using Pyramid, groups 3 and 4 showed higher CM (%) than groups 1 and 2, and in groups using Heliomolar. groups 3 and 4 showed higher CM (%) than group 1 (p < 0.05). After TML, in both Pyramid and Heliomo)ar groups, group 3 showed higher CM (%) than group 1 (p < 0.05) CM (%) of the regions are significantly different in each group (p < 0.05). Before TML, no statistical difference was found between groups within the VE and CE region. In the OE region, group 4 of Pyramid showed higher CM (%) than group 2, and groups 2 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). After TML, no statistical difference was found among groups within the VE and CE region. In the OE region, group 3 of Pyramid showed higher CM (%) than groups 1 and 2, and groups 2,3 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). It was concluded that intermittent polymerization may be effective in reducing marginal gap formation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.178-188
• /
• 2017

Purpose: We compared the effects of newly developed diode laser (Bison 808 nm Diode laser) on the treatment of peri-implantitis with conventional products (Picasso 810 nm Diode laser) by comparing the surface temperature of titanium disc and bacterial sterilization according to laser power. Materials and Methods: The titanium disc was irradiated for 60 seconds and 1 - 2.5 W using diode laser 808 nm and 810 nm. The surface temperature of the titanium disc was measured using a temperature measurement module and a temperature measurement program. In addition, in order to investigate the sterilizing effect according to the laser power, 808 nm laser was irradiated after application of bacteria to sandblasted large-grit acid-etched (SLA) and resorbable blast media (RBM) coated titanium discs. The irradiated disks were examined with scanning electron microscopy. Results: Both 808 nm and 810 nm lasers increased disk surface temperature as the power increased. When the 810 nm was irradiated under all conditions, the initial temperature rise rate, the descending rate, and the temperature change before and after was higher than that of 808 nm. Disk surface changes were not observed on both lasers at all conditions. Bacteria were irradiated with 808 nm, and the bactericidal effect was increased as the power increased. Conclusion: When applying these diode lasers to the treatment of peri-implantitis, 808 nm which have a bactericidal effect with less temperature fluctuation in the same power conditions would be considered safer. However, in order to apply a laser treatment in the dental clinical field, various safety and reliability should be secured.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.90-94
• /
• 2014

Environmental qualification (EQ) for safety-related equipment is required to ensure that those equipment will perform their required function even under the harsh environment conditions arising from design basis accident in the nuclear power plant. As a part of EQ program, the room temperature analysis in case of a loss of Heating, Ventilation, and Air Conditioning(HVAC) system was carried out to ensure the operability of the safety-related equipment of a nuclear power plant randomly chosen among the Korean nuclear power plants. In this paper, this analysis was performed in the conservative perspective using GOTHIC code. The room temperature analysis includes selecting the rooms in which the safety related equipment are located but not supported by safety related HVAC and determining the temperature of the selected rooms. Target rooms for the analysis consist of W229/W237 (Aux. feedwater pump room), W232 (Aux. feedwater tank room) and W230 (Equipment passageway). The results showed the temperature range from $43^{\circ}C$ to $83^{\circ}C$, in 72 hours after a loss of HVAC. Those values are far below of generic EQ temperature($171^{\circ}C$). Therefore, it is satisfied with EQ requirement of temperature limits on safety related equipment.

• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.229-248
• /
• 2002

The primary objective of this study is to firstly survey and analyze the working environment and actual condition, secondly know their problems, and then provide the basic data about how to improve their working conditions. The specific study items for getting the goal above is as follows: 1. How does the industrial company connect with highschool vocational education well? 2. How does the mechanical technical highschool graduate apply with industrial field? The result of study is as follows: 1. In case of employment's information and the industrial educationed cooperation, the workers who has the working history in less than 5 years takes short to find the job. National high school graduates and those who get the job through the school and the teacher changed their job at short period compared to other. 2. There was no benefit about the same major's worker at industrial field. The workers admitted that there is the exemption fo military service and the certification's allowance, only for which is related to their job. The longer the workers stay their job, the more they had the chance to get the exemption of military service. National highschool were carried out the curriculum well as planed especially for their major subjects. Whereas, the public and private highschools weren't. The seniors of their job and the coworkers are very helpful for learning the actual knowledge. The workers said that the school's curriculum and club activity weren't effective applying with their working field. 3. The study says that the important things of their job is the knowledge of their major. Those who 80% answered that the worker must improve the knowledge of their major to be a good engineer. Learning from their senior in working field was very helpful. The question above was ranked as the first. 4. The answer says that the new changed job's pay is more than the previous job. That is, the reason of leaving the job is the pay gap. The most dissatisfaction and problems in present job was the environment of working and the working condition. 5. Regarding to asking next year's plan, the answer says that keeping the job was ranked as the first. That answer means that they conservative.

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.164-172
• /
• 2006

Background: The authors conducted a retrospective study to evaluate the mechanism of injury, the surgical techniques, the clinical features, the combined injuries, the treatment results, and the surgical complications in patients with atlantoaxial fracture/subluxations. Methods: The authors reviewed 71 cervical fracture/dislocations during a four-year period from September 2002 to August 2006. Among them, there were twenty one C1,2 fracture/subluxations. There were thirteen men (mean age : 43.5 years) and eight women (mean age : 50 years). Their follow-up period was at least 6 months, and the mean follow-up period was 9.6 months. Gardner-Wells tongs traction was used in all patients immediately on presentation. Surgical treatment was performed, depending on the pathologic conditions. Results: Of all 21 cases, 14 cases were injured in motor vehicle accidents, 5 were falls, and 2 were miscellaneous. There were four C1 fracture (5.6%), fourteen C2 fracture (66.7%), one C1 and 2 combined fracture (4.8%), and one C1-2 subluxation (4.8%). The C1 fractures in our series were classified as two Jefferson's fractures and two C1 lateral mass fracture. The C2 fractures were classified as one odontoid type I fracture, two odontoid type II fractures, five odontoid type III fractures, one hangman's fracture, and four C2 body tear-drop fractures. Atlantoaxial fractures were associated with six (28.6%) head injuries, four (19.0%) other spinal injuries, two (9.5%) chest injuries, and three (14.3%) spinal cord injuries. Surgical treatment was performed in nine cases, which included anterior odontoid screw fixation in two cases, transarticular screw fixation with iliac bone graft in one case, posterior fixation by using C2 pedicle screw and C3 lateral mass screw in three cases, lateral mass screw fixation C1-2 with iliac bone graft in one case, O(occipito)-C1-3-4 screw fixation in one case, posterior C2-3 wiring with allograft in one case, and halo vest in six cases. Conservative management was used in the rest of the patients in our trials. Bone fusion was complete in all cases. There were no operation-related complication, except one pin site infection in the case of halo vest. Conclusion: In this study, the choice of appropriate treatment according to the fracture types resulted in safe and effective management of unique atlantoaxial fracture/subluxations.

• Nuclear Engineering and Technology
• /
• v.41 no.5
• /
• pp.655-676
• /
• 2009

The first-ever integral effect test for simulating a guillotine break of a DVI (Direct Vessel Injection) line of the APR1400 was carried out with the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation) from the same prototypic pressure and temperature conditions as those of the APR1400. The major thermal hydraulic behaviors during a DVI line break accident were identified and investigated experimentally. A method for estimating the break flow based on a balance between the change in RCS inventory and the injection flow is proposed to overcome a direct break low measurement deficiency. A post-test calculation was performed with a best-estimate safety analysis code MARS 3.1 to examine its prediction capability and to identify any code deficiencies for the thermal hydraulic phenomena occurring during the DVI line break accidents. On the whole, the prediction of the MARS code shows a good agreement with the measured data. However, the code predicted a higher core level than did the data just before a loop seal clearing occurs, leading to no increase in the peak cladding temperature. The code also produced a more rapid decrease in the downcomer water level than was predicted by the data. These observable disagreements are thought to be caused by uncertainties in predicting countercurrent flow or condensation phenomena in a downcomer region. The present integral effect test data will be used to support the present conservative safety analysis methodology and to develop a new best-estimate safety analysis methodology for DVI line break accidents of the APR1400.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.4
• /
• pp.635-644
• /
• 2010

Objectives : The purpose of this study was to analyze and investigate the effecting factors on the actual condition of dental clinic use of the out patient. Methods : In oder to achieve this purpose, A survey for 302 patients in 6 participating dental clinics located in Daejeon metropolitan city from May 01 to May 30, 2010. The result of this study was as follows. Results : 1. The duration of dental clinic use was reflected in 36.1% of the under 1 year, 34.1% of over 2 years, and 29.8% of over 1 ~ under 2 years in order. Especially, the higher the duration of over 2 years the higher the age was, on married group had a significance. 2. The type of medical examination for samples was 27.6% of periodontal, 26.5% of conservative, 17.2% of prosthodontics, 10.9% of implant, and 7.9% of preventive in order. Especially, the male group the more the prosthodontics, implant had a significance. the higher the monthly income, on married group, the more the periodontal, prosthodontics and implant had a significance. 3. The motive of dental clinic selection was 38.4% of acquaintances' inducement, 33.4% of the superb treatment, 15.6% of easy convenience, and 7.0% of friendliness staff in order. Especially, male group the more the easy convenience, superb treatment, friendliness staff had a significance. 4. The mean of transportation in order to visit a dental clinic was 38.7% of public transportation, 37.5% of the own car, 23.8% of others in order. Especially, there was a highly significant difference on the public transportation in female, the lower education level, lower monthly income, and medical protection group. 5. The duration of time required of dental clinic reflected in 80.1% of the under 30 minute, 16.3% of over 30 minute~under 1 hour, and 3.6% of over 1 hour in order. Especially, the higher the treatment satisfaction, the dissatisfaction the higher the duration of time required under 30 minute had a significance. Conclusions : These results indicate that as medical services upgrade and get more varied, the expectation of medical quality also increases. It is thus considered that the revitalization of this hospital's management strategy can be achieved by providing highly developed medical services, and, more importantly, by better understanding the actual conditions of dental clinic use by the patients themselves.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.61-68
• /
• 2017

Gibberellic Acid-Stimulated Arabidopsis (GASA) genes are involved in plant hormone signaling, cell division and elongation, as well as in responses to stress conditions in plants. In this study, we isolated a GASA gene from hybrid poplar (Populus alba ${\times}$ P. glandulosa) and analyzed its physiological phenotype and molecular functions in poplar. PagGASA cDNA encodes a putative protein composed of 95 amino acids containing an N-terminal signal peptide and a conservative cysteine-rich C-terminal domain. Southern blot analysis revealed that one or two copies of the PagGASA are present in the poplar genome. The PagGASA transcripts were highly detected in flowers and roots. Moreover, the expression of PagGASA was induced by growth hormone (gibberellic acid) and stress hormones (abscisic acid, jasmonic acid, and salicylic acid). By using transgenic analysis, we showed that the upregulation of PagGASA in poplar provides high tolerance to drought stress. Therefore, our results suggest that PagGASA plays an important role in drought stress tolerance via stress-related plant hormone signaling in poplar.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.319-327
• /
• 2002

In this research, problems of recent design methods and their improvement for SIP(Soil-Cement Injected precast Pile) in domestic areas were studied by using the properties of load-settlement curves and bearing capacity from field loading tests. Elastic and plastic settlement for total settlement in each loading step of loading tests conducted in domestic areas has been shown to have a tendency. From this tendency and bearing capacity determined by loading tests, it could be ascertained that empirical chart could be an assistant tool in SIP design. It was shown that SIP design using N-value in domestic area with soil condition of granitic type resulted in very conservative hearing capacity. On the other hands, in soil with unfitted geological conditions, the design could be insecure. Also, we could ascertain that Meyerhof's bearing capacity using modified N-value on the tip part of pile was more applicable than recent design method where tip bearing capacity was 20NA$_p$ N-value limited to 50. These results showed that modified design method could be more economic than those in the past because it used pile's bearing capacity unto tolerable load of pile material.