• Korean journal of communication and information
• /
• v.40
• /
• pp.150-191
• /
• 2007

Defamation lawsuits of public figures against media have been an issue since Roh government set in. Dissension between the government and media has probably acted as the key factor on this problem. Accordingly, arguments on the defamation lawsuits of public figures occurred the political issues such as opposition between the Progressive and the Conservative Parties or between the ins and the outs and showed the limits to suggest an appropriate judgment or solution. This study will analyze how the court makes its judgement on their rights and the limits by understanding the characteristic and the problem of defamation lawsuits made by senior government officials including a politician, the government, the president, and etc. As results, the defamation lawsuits of politicians and senior government officials showed specially noteworthy matters in salvation (damage suits), the amount claimed, court costs, ratio of winning lawsuits, and etc. The result on the tendency of the court decision showed the following matters in confusion: it holds the media responsible for the burden of proof by applying the inappropriate criterion; The applied laws, especially in the inferior court decision, do not show the consistency of the burden of proof between the misconception/ intention (malice)/ accident/ purpose of slander on the legal principles of public figures. Therefore, this study suggests the court to apply an appropriate law, let alone regulating the Anti-SLAPP law, so that it curtails the rights of public figures; limits the salvation of damage suit; and protects the right only in the case of false accusation by applying the existing law of "the Protection of the Deceased's Defamation Law." In order to dissolve the confusion when applying the laws on the public figures, the study insists the court to positively apply the Constitutional Court made criterion on "people" and "content." The study also insists to distinguish "intention(malice)," "accident," and "purpose of slander" and variant sorts of the burden of proof should be applied to each.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).

• Journal of Korea Water Resources Association
• /
• v.46 no.8
• /
• pp.807-819
• /
• 2013

This study proposes a new methodology for future water balance projection considering climate change by assigning a weight to each scenario instead of inputting future streamflows based on GCMs into a water balance model directly. K-nearest neighbor algorithm was employed to assign weights and streamflows in non-flood period (October to the following June) was selected as the criterion for assigning weights. GCM-driven precipitation was input to TANK model to simulate future streamflow scenarios and Quantile Mapping was applied to correct bias between GCM hindcast and historical data. Based on these bias-corrected streamflows, different weights were assigned to each streamflow scenarios to calculate water shortage for the projection periods; 2020s (2010~2039), 2050s (2040~2069), and 2080s (2070~2099). As a result by applying the proposed methodology to project water shortage over the Korean Peninsula, average water shortage for 2020s is projected to increase to 10~32% comparing to the basis (1967~2003). In addition, according to getting decreased in streamflows in non-flood period gradually by 2080s, average water shortage for 2080s is projected to increase up to 97% (516.5 million $m^3/yr$) as maximum comparing to the basis. While the existing research on climate change gives radical increase in future water shortage, the results projected by the weighting method shows conservative change. This study has significance in the applicability of water balance projection regarding climate change, keeping the existing framework of national water resources planning and this lessens the confusion for decision-makers in water sectors.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.285-303
• /
• 2020

A military is not an organization that seeks profits, such as a company, or a research institute whose results and outcomes can produce. Therefore, it can be said that the nature of the bureaucracy is stronger than any other organizations, which perform the task centered based on ranks. In addition, as military missions deal with national and operation security which is closed with each other and more conservative compare to other organization. In this circumstance, the role of military organization and leaders is to carry out their duties with the cost of people's lives, and indeed, leades and leadership in military are more important than those of any organizations. However, many researches are lacking or focused on leadership research in a limited field, especially positive field, developmental, constructive leadership research and researches that are not focused on that area are limited. Already in the United States, research on negative leadership has been actively conducted under the direction of the Secretary of US Army Thomas E. White in 2003, how toxic leadership is serving in military organizations and on the battlefield. Now they realize how toxic leadership had impact on missions in military organizations and on the battlefield. The purpose of this study is to collect and analyze qualitative and quantitative data on the negative leadership of military organizations that have not been studied. The aim of this study was to establish a literature study on the scope and behavior of toxic leadership among negative leadership and to build empirical data on toxic leaders of current military organizations, and to create occupations that occur when subordinates work with toxic leaders. This study analyzes changes in satisfaction and organizational cohesion that mediates results and causes. This study will be more urgent and important for groups that prioritize groups and organizations over individuals, and it may provide new directions for the role and impact of military leaders from attempting these studies.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.2
• /
• pp.154-158
• /
• 2002

Purpose: To compare the results of open and arthroscopic method in recurrent anterior should erinstability. Materials and Methods: The 68 patients who have been taken the open or arthroscopic Bankartrepair for the period of Jan. 1995 to April. 2000. One group (23 patients) had elected an arthroscopic Bankart repair, the other group (45 patients) had chosen open stabilization. Patients were followed up12 to 63 months (ave. 34 months) after surgery. Results: We found 2 cases of subluxation out of open repair group, and then treated by conservative method. There were another 2 cases of dislocation and 2 cases of subluxation out of arthroscopicrepair group, and we have taken out 1 case of reoperation by open method. Using the functional scales by Rowe, the patients who have taken the open method posted at the average point of 87, while the arthroscopic method posted 85 points. Patients satisfaction points were 84.6 and 72.5 respectively. There were no criteria of statistically significant except stability and motion score. Conclusion: Open Bankart repair would be better in stability, and arthroscopic method in ROM gain. Proper patient selection based on physical examination and arthroscopic inspection to optimize the indications contributed to successful treatment.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.2
• /
• pp.54-58
• /
• 2010

Purpose: In patients with chronic cervical pain, the facet joint is the source of the majority. Due to the difficulty of identifying the exact location of the joint that causes these symptoms, the possibility of complications and the placebo effect brings clinical application into question. In this study, we assessed the prevalence of patients with chronic cervical pain and report the diagnostic and therapeutic usefulness of ultrasonography - guided facet joint block therapy. Materials and Methods: Patients with nonspecific chronic cervical pain for more than 6 months were selected. Patients with disc herniation, sciatica-related pain were excluded from the study and 160 patients who failed in conservative treatment (physical therapy, chiropractic therapy, medication) were included in the study. Diagnostic Ultrasonography-guided facet joint block was performed with 1% lidocaine, and after two weeks, Bupivacaine 0.25% was used in patients who tested positive for lidocaine. Patients with more than 75% pain reduction during movement after facet joint block were considered positive. Results: Among the 160 patients with chronic cervical pain, 96 patients(60%) had a positive reaction after facet block using lidocaine. Among the 64 patients with a negative reaction to lidocaine, 48 patients(75%) had a positive reaction to bupivacaine. There were 48 false positive patients(50%) who showed a positive reaction to lidocaine but a negative reaction to bupivacaine. The mean VAS of the total 160 patients before blocks was 8.5, after 2 weeks follow up it decreased to 2.7 (p = 0.001) and after 4weeks 3.6 (p = 0.001). The 8 patients as an initial improvement of symptoms are not satisfied with the procedure and the 3 patients had been worsened during observation, were showed pain relief after additional ultrasonography-guided facet joint block at 4th week. Conclusion: A single ultrasonography-guided block to chronic cervical pain patients has relatively low diagnostic value since high false positive rate. The twice facet joint blocks is thought to be a useful method for interventional pain management of patients with chronic cervical pain.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• Journal of Oral Medicine and Pain
• /
• v.32 no.2
• /
• pp.211-218
• /
• 2007

The purpose of this study was to compare the maximum bite forces between pre- and post-treatment related to specific diagnostic groups of TMD including masticatory muscle disorder (MMD), disc derangement (DD), joint inflammation (JI) and osteoarthritis (OA). Bite force between pre- and post-treatment was compared in 36 patients with unilateral TMD, successfully-managed in the Department of Oral Medicine, Dankook University Dental Hospital, for this study. The ratio of men to women was 7:29 and their mean age of $28.1{\pm}13.7$ years. The patients were categorized, through clinical and radiographic examination, into aforementioned 4 groups; MMD (N=18), DD (N=6), JI (N=5) and OA (N=7). The maximum bite force measurements were done at the antagonizing canines and 1st molars using a bite force recorder. Paired t-test, ANOVA, Multiple Comparison t-tests were used for statistical analysis. The results of this study showed that the maximum bite force before treatment increased after TMD treatment, which was noticeable at the canines (p=0.001 and p=0.000 for the affected and unaffected sides, respectively). In comparison related to the diagnostic groups of TMD, patients with osteoarthritis of TMJ exhibited the lowest strength while those with inflammatory disorder of TMJ had the highest strength on the affected sides. Increase of bite force after treatment was also found in each group. Significant difference between pre- and post-treatment was found at canines on the affected sides in MMD (p=0.045) and DD groups (p=0.009) while on the unaffected sides in OA group (p=0.003). Conclusively, the reduced bite force due to TMD could be recovered by conservative TMD treatment and that the difference of bite forces between pre- and post-treatment was noticeable at the canines.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.252-260
• /
• 2015

This paper describes the technical background for the Korean wildlife radiation dose assessment code, K-BIOTA, and the summary of its application. The K-BIOTA applies the graded approaches of 3 levels including the screening assessment (Level 1 & 2), and the detailed assessment based on the site specific data (Level 3). The screening level assessment is a preliminary step to determine whether the detailed assessment is needed, and calculates the dose rate for the grouped organisms, rather than an individual biota. In the Level 1 assessment, the risk quotient (RQ) is calculated by comparing the actual media concentration with the environmental media concentration limit (EMCL) derived from a bench-mark screening reference dose rate. If RQ for the Level 1 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 2 assessment, which calculates RQ using the average value of the concentration ratio (CR) and equilibrium distribution coefficient (Kd) for the grouped organisms, is carried out for the more realistic assessment. Thus, the Level 2 assessment is less conservative than the Level 1 assessment. If RQ for the Level 2 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 3 assessment is performed for the detailed assessment. In the Level 3 assessment, the radiation dose for the representative organism of a site is calculated by using the site specific data of occupancy factor, CR and Kd. In addition, the K-BIOTA allows the uncertainty analysis of the dose rate on CR, Kd and environmental medium concentration among input parameters optionally in the Level 3 assessment. The four probability density functions of normal, lognormal, uniform and exponential distribution can be applied.The applicability of the code was tested through the participation of IAEA EMRAS II (Environmental Modeling for Radiation Safety) for the comparison study of environmental models comparison, and as the result, it was proved that the K-BIOTA would be very useful to assess the radiation risk of the wildlife living in the various contaminated environment.