• 보존과학연구
• /
• s.30
• /
• pp.189-202
• /
• 2009

Ceramics from Taean shipwreck were studied to investigate the deterioration by soluble salts and desalination pattern according to each ceramic characterization. NaCl crystals were found as a crystal growth on the ceramic microstructure and deteriorated to push off the glaze layer of some Puncheong ware sample. As a result of monitoring the desalination pattern of ceramics for 74days, the earthenware sample with big pores and no glaze removed soluble salts so fast, but Puncheong ware and Whiteware samples removed lots of soluble salts slowly and continuously. Generally, it takes long time to remove soluble salts from porcelains, due to small pores and glaze, but the long-term desalination probably can cause the damage on the surface layer such like glaze. As some soluble salts still remains in the ceramic microstructures after desalination, it is very important to control and keep the relative humidity stable through the proper storage. There are various ceramic deterioration patterns by soluble salts. Therefore, it needs to select the desalination method of ceramics from shipwreck, considering the material characteristics and the production techniques.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.600-605
• /
• 2009

A general purpose viscous flow solver Ansys CFX is used to study a Savonius type wave energy converter in a 3D numerical viscous wave tank. This paper presents the results of a computational fluid dynamics (CFD) analysis of the effect of blade configuration on the performance of 3 bladed Savonius rotors for wave energy extraction. A piston-type wave generator was incorporated in the computational domain to generate the desired incident waves. A complete OWC system with a 3-bladed Savonius rotor was modeled in a three dimensional numerical wave tank and the hydrodynamic conversion efficiency was estimated. The flow over the rotors is assumed to be two-dimensional (2D), viscous, turbulent and unsteady. The CFX code is used with a solver of the coupled conservation equations of mass, momentum and energy, with an implicit time scheme and with the adoption of the hexahedral mesh and the moving mesh techniques in areas of moving surfaces. Turbulence is modeled with the k.e model. Simulations were carried out simultaneously for the rotor angle and the helical twist. The results indicate that the developed models are suitable to analyze the water flows both in the chamber and in the turbine. For the turbine, the numerical results of torque were compared for all the cases.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.100-113
• /
• 2005

Leaf color and plant vigor are key indicators of crop health. These visual plant attributes are frequently used by greenhouse managers, producers, and consultants to make water, nutrient, and disease management decisions. Remote sensing techniques can quickly quantify soil and plant attributes, but it requires humans to translate such data into meaningful information. Over time, scientists have used reflectance data from individual wavebands to develop a series of indices that attempt to quantify things like soil organic matter content, leaf chlorophyll concentration, leaf area index, vegetative cover, amount of living biomass, and grain yield. The recent introduction of active sensors that function independent of natural light has greatly expanded the capabilities of scientists and managers to obtain useful information. Characteristics and limitations of active sensors need to be understood to optimize their use for making improved management decisions. Pot experiments involving sand culture were conducted in 2003 and 2004 in a green house to evaluate corn and red pepper biomass. The rNDVI, gNDVI and aNDVI by ground-based remote sensors were used for evaluation of corn and red pepper biomass. The result obtained from the case study was shown that ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season crop nitrogen management providing both spatial and temporal information.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.58-65
• /
• 1994

In order to reduce particulate emissions from diesel vehicles, mathematical model is established and analyzed on ceramic wall-flow monolith filter. A wall-flow monolith filter placed in the exhaust stream of a diesel engine can effectively limit the emission of diesel particulates through the monolith. The accumulated particulates can then be periodically combusted inside the monolith by directing hot gas to the monolith while normal engine exhaust is routed around the monolith system. The resulting low flow rates through the monolith require consideration of gas dynamics through the channels as well as particulate combustion to analyze this regeneration process. A mathematical model of the regeneration is formulated as a system of nonlinear partial differential equations describing the conservation of mass, momentum and energy. Numerical solutions are obtained by using a finite difference techniques for the spatial discretization. So we can use filter simulation program for the purpose of filter design and actual filter regeneration

• Mycobiology
• /
• v.42 no.4
• /
• pp.311-316
• /
• 2014

Lichen studies, including biodiversity, phylogenetic relationships, and conservation concerns require definitive species identification, however many lichens can be challenging to identify at the species level. Molecular techniques have shown efficacy in discriminating among lichen taxa, however, obtaining genomic DNA from herbarium and fresh lichen thalli by conventional methods has been difficult, because lichens contain high proteins, polysaccharides, and other complex compounds in their cell walls. Here we report a rapid, easy, and inexpensive protocol for extracting PCR-quality DNA from various lichen species. This method involves the following two steps: first, cell breakage using a beadbeater; and second, extraction, isolation, and precipitation of genomic DNA. The procedure requires approximately 10 mg of lichen thalli and can be completed within 20 min. The obtained DNAs were of sufficient quality and quantity to amplify the internal transcribed spacer region from the fungal and algal lichen components, as well as to sequence the amplified products. In addition, 26 different lichen taxa were tested, resulting in successful PCR products. The results of this study validated the experimental protocols, and clearly demonstrated the efficacy and value of our KCl extraction method applied in the fungal and algal samples.

• Journal of the Korean Geographical Society
• /
• v.33 no.3
• /
• pp.435-446
• /
• 1998

This Paper reports that a new remote sensing techlique focused on a narrow and long strip target (e.g. 15m wide and 100km long) has been specifically developed for pipeline ROW (Right-Of-Way) recovery monitoring. With video it was possible to isolate the maior vegetation communities of the narrow pipeline ROW with acceptable spatial precision by visual or quantitative methods. It was particuarly useful when used to assess a variety of spatial patch dynamics for ROW recovery through digital change-detection techniques in a GIS environment. The main conclusion of this paper is that VSM is a realistic operational technique for a pipeline ROW application. The results also indicate that VSM could be extensively used for other examples of linear thematic mapping.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.1027-1044
• /
• 2017

Membrane penetration is the most important factor influencing the measurement of volume change for triaxial consolidated-drained shear test for coarse-grained soil. The effective pressure p, average particle size $d_{50}$, thickness $t_m$ and elastic modulus $E_m$ of membrane, contact area between membrane and soil $A_m$ as well as the initial void ratio e are the major factors influencing membrane penetration. According to the membrane deformation model given by Kramer and Sivaneswaran, an analytical solution of the membrane penetration considering the initial void ratio is deduced using the energy conservation law. The basic equations from theory of plates and shells and the elastic mechanics are employed during the derivation. To verify the presented solution, isotropic consolidation tests of a coarse-grained soil are performed by using the method of embedding different diameter of iron rods in the triaxial samples, and volume changes due to membrane penetration are obtained. The predictions from presented solution and previous analytical solutions are compared with the test results. It is found that the prediction from presented analytical solution agrees well with the test results.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.39-58
• /
• 2006

This study reviews recent shell midden studies in Korea. With more interest in biological materials, recent shell midden studies have attempted to reconstruct palaeoenvironment, and understand subsistence economy, the formation processes and function of sites and past culture. Especially, one of the major topics in prehistoric Korean shell midden studies is the transitional process from hunter-gatherer to farmer. To solve these questions related with shell middens, new sampling strategies and excavation techniques have been adopted. Analytical methods combined with scientifical technologies also have been introduced to shell middle studies. These methods indude stable isotope analyses(Oxygen isotope and Carbon and Nitrogen isotope analyses) and growth-line analysis, etc.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.3 no.3
• /
• pp.129-138
• /
• 2022

Reintroduction programs have been promoted across the world to recover and rehabilitate endangered birds through ex situ captive breeding and releasing to the nature. The ultimate aims of these reintroduction programs are recovery of sustainable populations in natural habitats. To ensure the success of the reintroduction programs, it is necessary to examine the followings in order to increase the success rate of releasing along with the development of captive breeding techniques: 1) Adequate habitat provision, 2) adaptability of captive-bred individuals, 3) survivability of released individuals, and 4) social interest and will. Before releasing captive-bred individuals, it should be reviewed whether there are habitats in which the limiting factor is removed, and assessed their long-term safety. The quantity and quality of the released individuals must be considered to increase the chances for mate selection, maintain genetic diversity, and acquire the ability to adapt to the wild. The release method must be decided in consideration of characteristics of the target habitats and individuals, and rational means such as careful observation, evaluation, and feedback must be provided throughout the release process. For the long-term success of recovery projects, social awareness, sustainable support, and related experts are needed. Satisfying these criteria can help to increase the success rates of reintroduction programs. For the bird reintroduction program in the future, the feasibility of the methods and procedures must be closely reviewed before starting.

• Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.256-267
• /
• 2023

The suitability of any fish species for successful aquaculture requires basic information on its reproduction and growth. This study investigated some facets of the reproductive biology of Synodontis shall (Mochokidae) from River Siluko in Nigeria. Fish samples were collected forth-nightly for a duration of fourteen (14) months-March 2015 to April, 2016 with the assistance of artisanal fishermen. Fishes were identified using taxonomic guides and standard techniques were used for determination of sex ratio, gonad maturation and fecundity. Linear regression method was used to define the correlation between fecundity and fish length, body weight and ovary weight. Results showed that sex ratio did not indicate a significant divergence (p > 0.05) from the 1 male to 1 female distribution ratio (1:1.41). Gonad morphology revealed paired gonads. Testes and ovaries were classified into four maturity stages: immature, resting, ripening and ripe. Gonadosomatic index ranged from 0.04 to 5.68 (males) and 0.03 to 20.19 (females). Absolute fecundity ranged from 1,014 to 4,520 eggs (mean = 2,592 eggs) and did not correlate significantly (p > 0.05) to ovary weight. This study has contributed to existing data on the biology of freshwater fish species in Nigeria and provided valuable information for fishery management tools in the conservation and utilization of this valuable freshwater fish species.