• 제목/요약/키워드: conservation materials

검색결과 892건 처리시간 0.027초

영양 사암을 대상으로 한 에틸실리케이트 계열 처리제의 강화효과 평가 (Quantitative Evaluation for Effectiveness of Consolidation Treatment by Using the Chemical of Ethyl Silicate Series for the Sandstone in Yeongyang)

  • 이장존;한민수;송치영;전병규;도민환
    • 보존과학연구
    • /
    • 통권30호
    • /
    • pp.125-136
    • /
    • 2009
  • Stone cultural heritages in Korea have a severe damages from chemical and biological weathering because most of them have been situated in outdoors without any suitable protection systems, and this in turn causes deformation and structural damage. To counteract these problems and increase durability, various kinds of conservation materials are used in the conservation and restoration treatments. However until now there are not many practical and technological experiments on this subject. This paper attempts quantitative evaluation of effectiveness about chemical of ethylsilicate based resin for sandstone in Yeongyang-gun. It takes a long time to evaluate durability and side effect after conservation materials treatment. So we use artificial weathering through freezing§ thawing experimental method. As a result of this experiment, porosity and absorptance increased, and elastic wave speed, elastic modules, unconfined compression strength and tensile strength decreased more than before. This study plans to make a scientific method study about weathering factor and mechanism, and to deduce correlation between artificial weathering and natural weathering.

  • PDF

석조 문화재 보존용 저황변 Epoxy의 제조 및 물성 연구 (Preparation and Physical Properties of Epoxy with Improved Yellowing Resistance for the Preservation of Stone Cultural Heritage)

  • 이승연;오승준;위광철
    • 박물관보존과학
    • /
    • 제26권
    • /
    • pp.1-12
    • /
    • 2021
  • 석조 문화재 보존처리 시 사용되고 있는 Bisphenol A계 Epoxy 수지의 Yellowing 현상개선과 재료의 다양성 확보를 위해 hydrogenated Bisphenol A계 주제 기반의 석조 문화재 보존용 Epoxy 수지를 제조하여 물성 비교 실험을 진행하였다. 실험 결과 제조한 Epoxy 수지가 인장강도, 접착 강도, 가공성에서 기존 재료보다 향상된 물성을 확인할 수 있었으며, 황변성은 약 5 ~ 8배 개선되었다. 이러한 결과는 대부분이 야외에 위치한 석조 문화재의 특성상 안정적인 보존 재료로서의 적용이 가능할 것으로 판단된다.

국립중앙박물관 소장 갑주(甲冑)의 보존처리와 구조적 특징 - 조선시대 중·후기 갑주를 중심으로- (Conservation Treatment and Structural Characteristics of Armor and Helmets Housed in the National Museum of Korea - Armor and Helmets from the Mid- and late Joseon Dynasty)

  • 박진호;박지혜;황진영
    • 박물관보존과학
    • /
    • 제26권
    • /
    • pp.35-66
    • /
    • 2021
  • 본 연구는 국립중앙박물관 소장 갑주(투구 2점, 갑옷 4점)에 대해 과학적 조사와 보존처리를 실시하고, 그 결과를 바탕으로 조선시대 중·후기 갑주의 구조적인 특징을 살펴본 것이다. 갑주는 유기물과 무기물이 함께 있는 복합 재질이므로, 보존처리는 각 재질의 안정한 조건이 서로 영향을 받지 않는 선에서 '조사·분석 → 오염물 제거 → 안정화 및 강화처리 → 손상 부위 보수 → 보관'의 과정으로 실시하였다. 갑주는 손상이 심한 상태였으나, 보존처리를 통해 안전한 보수 및 일부 부위의 복원을 완료하였다. 이 과정에서 확인된 내용을 바탕으로 조선 중기의 의상형 갑옷 일부(갑상)와 조선 후기의 포형 피갑, 조끼형 흉갑 그리고 투구에 사용된 재료 및 구조적 특징을 파악할 수 있었고, 이를 통해 제작 방법을 추정할 수 있었다.

金子量重(가네코 카즈시게) 기증(寄贈) 박형(珀形) 호(壺)의 복원(復元) - 경질토기(硬質土器)를 중심(中心)으로 - (The Conservation of a Spanish Gourd-Style Jar (Donated Object by Sir Ganeko))

  • 황현성;이해순;이용희
    • 박물관보존과학
    • /
    • 제3권
    • /
    • pp.15-19
    • /
    • 2001
  • 이번 가네코 카즈시게 선생이 기증한 여러 유물 중 금자(金子)124 수호는 약 60여개 정도의 파편을 접합하고, 자체 하중을 견딜 수 있는 접착제를 적절하게 사용하여 결손부분을 복원하였다. 또한 보존처리를 하는 동안에도 항상 가역성을 염두에 두면서 처리하였고, 색맞춤도 미관상 어색함이 없는 범위 내에서 처리하였다. 그 결과, 기형이 둥근 점토질의 박형(珀形) 항아리로 새롭게 탄생하였다.

포도(자옥) 유목의 월동시 피복한 보온피복재 종류가 발아 및 병해 발생에 미치는 영향 (The effect of various heat covering materials on the sprouting and occurrence of disease, insects during wintering of grape young tree (Shigyoku))

  • 남상영;김태수;김인재;김민자;이철희
    • 한국자원식물학회지
    • /
    • 제13권3호
    • /
    • pp.208-212
    • /
    • 2000
  • 보온 피복재 종류가 자옥 포도 유목의 월동시 동해방지, 노동력 절감 및 병해 발생 억제에 미치는 영향을 구명하기 위하여 11월 하순에 짚을 덮은 다음 보온덮개B, 킬딩, 칼라부직A 및 백색니들펀칭부직포 등을 피복하여 시험한 결과를 요약하면 다음과 같다. 1. 보온력은 백색니들펀칭부직포가 가장 불량하였고, 다른 보온재간에는 차이가 미미하였다. 2. 발아는 보온덮개B에서 빨리 시작되었으며, 발아 9일 후에도 발아율이 79.7%로 타 보온재 보다 2.3∼12.5% 높았다. 3. 생육은 보온재간에 차이가 없었으며, 병해 발생은 킬딩과 보온덮개B에서 뿌리혹병이 지수 3.0∼3.2로 다소 많이 발생되었을 뿐 기타 병해는 처리간에 차이가 없거나 미미 하였다. 4. 작업 단계별 소요노력은 보온덮개B에 비하여 킬딩은 6% 많았으나, 칼라부직A는 6%, 백색니들펀칭 부직포는 15%적었다.

  • PDF

Changes of Physical and Chemical Properties for Making Raw Materials and Reproductions According to Manufacturing Stages in Traditional Korean White Porcelain

  • Kim, Du Hyeon;Jeong, Ji Youn;Oh, Eun Jeong;Han, Min Su
    • 보존과학회지
    • /
    • 제38권4호
    • /
    • pp.301-313
    • /
    • 2022
  • We made a Korean white porcelain or Joseon Baekja jar and based on the raw materials used and reproductions of each stage, we aimed to compare and analyze the physicochemical changes of the raw materials such as clay at each manufacturing stage, as well as identify the characteristics and correlations. Although the basic main components of clay and glaze material are similar, their texture becomes denser in the process of bisque firing pottery (Chobeol-pyeon) and glaze firing pottery (Jaebeol-pyeon), and we confirmed that in addition to the tendency of increasing vitrification, low-temperature minerals such as mica and illite gradually disappeared, while high-temperature minerals such as cristobalite were newly created. This phenomenon has also been verified by the rapid decrease in absorption rate while the change in specific gravity was small. In addition, the color was greatly affected by the firing atmosphere, and the yellow-red chromaticity of the raw materials was higher during bisque firing but showed a rapidly decreasing characteristic during glaze firing. The value of magnetic susceptibility, which is related to iron (Fe) component, showed a tendency to decrease in glaze firing pottery. CT images were confirmed as a method that can indirectly estimate the change in the material properties of the object step-by-step for the entire object. In conclusion, the study of manufacturing stages of reproduction can provide basic data for scientific research on the estimation of porcelain and pottery making technology and changes in raw materials.

섬유 문화재의 분석과 보존처리 - 이론과 실제 - (Analysis and Conservation of Historic Textiles - Theory and Practice -)

  • 오준석
    • 복식
    • /
    • 제58권5호
    • /
    • pp.211-231
    • /
    • 2008
  • To conserve historic textiles, analyses of textile materials, pollutants and deterioration are prerequisite steps. Based upon analytical results, guides for conservation of historic textiles are established. In analyses of textile materials, pollutants and deterioration, there are chemical methods(burning, solubility and staining), physical methods(microscopy and density) and instrumental analysis(Fourier Transform Infrared Spectroscopy (FT-IR), Fourier Transform Raman Spectroscopy(FT-Raman), Gas Chromatography(GC), Mass Spectroscopy(MS), X-Ray Fluorescence (EDXRF, WDXRF), Energy Dispersive Spectroscopy(EDS), and X-Ray Diffraction(XRD), Tensile Testing Machine etc.). Combination of qualitative and quantitative analyses makes accurate diagnosis of textile condition possible. As examples of analyses and conservation of historic textiles, Chuninsan(19 century) similar to sunshade with handing down historic textile and golden decorative skirt(17 century) with excavated costume are taken.

석조문화재 오염물 제거 방안의 표준화 수립 및 가치정립 I -설문조사의 통계를 중심으로- (Formation of Standardization and Valuation of Decontamination for Stone Culture Heritage I -Based on the Questionnaire-)

  • 김진형;정용재;김사덕
    • 보존과학연구
    • /
    • 통권28호
    • /
    • pp.169-182
    • /
    • 2007
  • It is very difficult to attain stable and satisfactory result satisfaction from newly developed materials and methodologies for conservation of cultural properties. In order for an effective conservation method, it is necessary that the manual for application of the proper materials and its methodology should be set up. However, stone conservation value must be established in advance of the manual, because the philosophical concepts and the technical methodology are not standardized. In this study, therefore, the conservators' opinion about the conservation for stone artifacts was collected. The opinions were based on the questionnaire about cleaning of surface contamination on masonry, and hereafter those will be referred to the conservation method about stone artifacts.

  • PDF