• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.51-57
• /
• 2013

직물형 유리섬유 조합에 따른 보강 집성재의 볼트 접합부 전단 성능을 알아보기 위하여 인장형 전단시험을 실시하였다. 보강재는 직물형 유리섬유로서 유리섬유 배열 형태는 평직형과 능직형을 사용하였다. 보강 집성재는 5층으로 직물형 유리섬유의 삽입 위치와 조합 형태를 달리하여 층재 사이에 삽입 적층시켜 제작하였다. 인장형 전단 시험편은 강판 삽입형로서 끝면거리 7D에 직경 12, 16 mm의 볼트로 접합하였다. 체적비 1% 직물형 유리섬유 보강 집성재의 경우 12 mm 볼트 접합부의 항복 전단내력은 집성재 외층부보다 내층부를 보강한 시험편에서 10% 큰 값을 나타내었다. 체적비 2% 직물형 유리섬유 보강 집성재의 항복 전단내력은 12 mm 볼트 접합부의 경우 각층재 사이에 삽입 적층시킨 시험편이 보강하지 않은 접합부보다 약 22% 향상되었으며, 16 mm 볼트 접합부의 항복 전단내력은 약 20% 향상되었다.

• Steel and Composite Structures
• /
• 제32권4호
• /
• pp.497-507
• /
• 2019

Exposed column base connections are used in low- to mid-rise steel moment resisting frames. This paper is to investigate the effect of the base plate thickness on the exposed column base connection strength, stiffness, and energy dissipation. Five specimens with different base plate thickness were numerically modelled using ABAQUS software. The numerical model is able to reproduce the key characteristics of the experimental response. Based on the numerical analysis, the critical base plate thickness to identify the base plate and anchor rod yield mechanism is proposed. For the connection with base plate yield mechanism, the resisting moment is carried by the flexural bending of the base plate. Yield lines in the base plate on the tension side and compression side are illustrated, respectively. This type of connection exhibits a relatively large energy dissipation. For the connection with anchor rod yield mechanism, the moment is resisted through a combination of bearing stresses of concrete foundation on the compression side and tensile forces in the anchor rods on the tension side. This type of connection exhibits self-centering behavior and shows higher initial stiffness and bending strength. In addition, the methods to predict the moment resistance of the connection with different yield mechanisms are presented. And the evaluated moment resistances agree well with the values obtained from the FEM model.

• 한국통신학회논문지
• /
• 제15권4호
• /
• pp.341-352
• /
• 1990

본 논문에서는 nx64Kb/s의 다윈 트래픽 수용에 있어서 분리 수용, 부분 혼합 수용, 완전 혼합 수용등의 세가지 형태의 스위치망을 제시하고 다원 트래픽의 호손을 계산 알고리즘을 사용하여 트래픽 혼합비에 따른 각 호소율계산하고 그 특성을 분석하며, 주어진 서비스 등급에서 만족되는 트래픽처리 용량을 알아 본다. 완전 혼합 수용 형태의 스위치는 비교적 적은 양의 중대역 트래픽을 갖는 ISDN 트래픽을 수용할 수 있으며, 중대역 트래픽양이 증가된 경우의 ISDN 트래픽을 수용하기 위해서는 부분 혼합 수용 형태나 분리 수용 형태의 스위치가 필요하다. 앞으로 이러한 연구결과는 다윈 트래픽을 수용하는 ISDN 스위치망 설계에 이용될 수 있을 것이다.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.303-310
• /
• 2011

복합 트러스교는 강재 박스 교량이 주류를 이루고 있는 우리나라 중지간 교량의 형식적 대안이 될 수 있는 구조 형식이다. 이러한 복합 트러스교의 핵심 기술은 강관과 콘크리트 슬래브를 연결하는 격점 구조이며 일본 등에서는 시공 회사별로 고유의 격점 구조를 개발하여 실험적 검증을 통해서 실교량에 적용해 오고 있다. 이 연구에서도 힌지형 격점 구조를 제안하고 이에 대한 정적인 구조 성능을 이미 검증한바 있으며 피로 실험을 통해 구조 상세를 개선하고 피로 성능을 검증하였다. 복합 트러스 거더에 대한 피로 실험 결과 정적인 구조 성능이 입증된 격점 구조라고 하더라도 매입된 연결판이 충분히 피로 파괴를 나타낼 수 있으며 이를 방지하지 하기 위한 구조 상세 개선 방안으로 perfobond 강재를 사용하는 방법과 강관에 원형 리브를 부착하는 방법을 제시하였다. 그리고 해석적 방법을 통해 강관에 원형 리브를 부착하는 방법이 격점부 강재 물량 증가시키지 않으면서도 피로 성능 개선에 효과적이라는 것을 입증하게 되었으며, 추가적인 격점 구조 피로 실험을 통해 피로 성능을 검증하였다. 따라서 이 연구에서 제안된 힌지형 격점 구조는 원형 리브를 부착하고 충분한 매입 깊이를 확보해 준다면 정적 구조 성능 뿐만 아니라 피로 성능도 확보되어 실제 복합 트러스 교량에서 유용하게 활용될 수 있을 것으로 사료된다.

• 대한수학회논문집
• /
• 제12권2호
• /
• pp.383-391
• /
• 1997

The main purpose of the present paper is to derive the induced (Finsler) connections on the hypersurface from the Finsler connections of Berwald type (a Berwald h-recurrent connection and a $F\Gamma$' connection) of a Finsler space and to seek the necessary and sufficient conditions that the induced connections coincide with the intrinsic connections. And we show the quantities and relations with respect to the respective induced connections. Finally we show some examples.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.295-302
• /
• 2000

Slab guideway, surface treatment, heat line installation, and joint connection for Automated Guideway Transit with rubber tire are researched. While the AGT with rubber tire is constructed in city, the precast slab guideway must be considered a reduction of the construction period and the noise under construction. which related with environment. To do that, a basic design and the structural analysis for the precast slab guideway with rubber tire are studied. The surface treatment and the heat line installation of that are also compared with currently used methods. Tining method is applied to the surface treatment adopted from the concrete pavement application currently in use. The connection method between the slab of bridge and precast guideway are suggested with a bolt type and a bond type. To minimize noise and vibration of the connection while the AGT is in driving, the slop connection method can be enhanced the serviceability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.14-15
• /
• 2013

Green Frame is precast concrete column-beam structure. There are three types on column connection. The coupler type which is one of the three, need to be improved because of unstability caused by pre-installation of column before casting the slab, and quality deterioration caused by lack of workspace. Therefore, in this study, new coupler connection type with thread rebar is suggested. The result of this study shall be used for the efficiency analysis of the new coupler connection.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.9-13
• /
• 2015

This paper describes the analysis of deterioration characteristics for connection factor used in grounding system. The connection method of grounding system is specified in IEC standard. In order to analyze the deterioration characteristics for connection factor, deterioration test was carried out when the connection factor was buried in salt water and underground. The test connection factors were C-type sleeve, clamp, and exothermic welding. As a consequence, most of the connection factor was corroded, and the electrical resistance decreased after deterioration. The analytical results can be used to establish the safety of grounding system.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.767-778
• /
• 2018

The purpose of this study is to investigate how a fully restrained bolted beam splice affects the connection behavior as a column-tree connection in steel special moment frames under cyclic loading when located within the plastic hinge zone. The impacts of this attachment in protected zone are observed by using nonlinear finite element analyses. This type of splice connection is designed as slip-critical connection and thereby, the possible effects of slippage of the bolts due to a possible loss of pretension in the bolts are also investigated. The 3D models with solid elements that have been developed includes three types of connections which are the connection having fully restrained beam splice located in the plastic hinge location, the connection having fully restrained beam splice located out of the plastic hinge and the connection without beam splice. All connection models satisfied the requirement for the special moment frame connections providing sufficient flexural resistance, determined at column face stated in AISC 341-16. In the connection model having fully restrained beam splice located in the plastic hinge, due to the pretension loss in the bolts, the friction force on the contact surfaces is exceeded, resulting in a relative slip. The reduction in the energy dissipation capacity of the connection is observed to be insignificant. The possibility of the crack occurrence around the bolt holes closest to the column face is found to be higher for the splice connection within the protected zone.

• Kyungpook Mathematical Journal
• /
• 제60권2호
• /
• pp.223-238
• /
• 2020

We study a lightlike hypersurface M of an indefinite nearly trans-Sasakian manifold ${\bar{M}}$ with an (ℓ, m)-type connection such that the structure vector field ζ of ${\bar{M}}$ is tangent to M. In particular, we focus on such lightlike hypersurfaces M for which the structure tensor field F is either recurrent or Lie recurrent, or such that M itself is totally umbilical or screen totally umbilical.