• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.187-193
• /
• 2015

The ICT healing platform sets a couple of goals including preventing chronic diseases and sending out early disease warnings based on personal information such as bio-signals and life habits. The 2-step open system(TOS) had a relay designed between the healing platform and the storage of personal health data. It also took into account a publish/subscribe(pub/sub) service based on large-scale connections to transmit(monitor) the data processing process in real time. In the early design of TOS pub/sub, however, the same buffers were allocated regardless of connection idling and type of message in order to encode connection messages into a deflate algorithm. Proposed in this study, the dynamic buffer allocation was performed as follows: the message transmission type of each connection was first put to queuing; each queue was extracted for its feature, computed, and converted into vector through tf-idf, then being entered into a k-means cluster and forming a cluster; connections categorized under a certain cluster would re-allocate the resources according to the resource table of the cluster; the centroid of each cluster would select a queuing pattern to represent the cluster in advance and present it as a resource reference table(encoding efficiency by the buffer sizes); and the proposed design would perform trade-off between the calculation resources and the network bandwidth for cluster and feature calculations to efficiently allocate the encoding buffer resources of TOS to the network connections, thus contributing to the increased tps(number of real-time data processing and monitoring connections per unit hour) of TOS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.128-138
• /
• 2022

In this study, in order to apply ultra-high-strength concrete beams of 100 MPa or more manufactured by centrifugal molding as the superstructure of the avalanche tunnel, the purpose is to verify the structural safety of the corner rigid joint in which the centrifugal molded beam is integrated with the substructure, which is the negative moment area. A full-size specimen was manufactured, and loading tests and analysis studies were performed. In order to expect the same effect that the maximum moment occurs in the corner joint part of the upper slab end when the standard model of the avalanche tunnel is designed with a load combination according to the specification, a modified cantilever type structural model specimen was manufactured and the corner rigid joint was fixedly connected. A study was performed to determine the performance of the method and the optimal connection construction method. The test results demonstrated that the proposed connection system outperforms others. Despite having differences in joint connection construction type, stable flexural behavior was shown in all the tested specimens. The proposed method also outperformed the behavior of centrifugally formed beams and upper slabs. The behavior of the corner rigid joint analysis model according to the F.E. analysis showed slightly greater stiffness compared to the results of the experiment, but the overall behavior was almost similar. Therefore, there is no structural problem in the construction of the corner rigid joint between the centrifugally formed beam and the wall developed in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.532-540
• /
• 2010

The strength properties of wooden model retaining wall made of pitch pine (Pinus rigida Miller) was evaluated. Three different types of wooden model retaining wall were made of the 11cm square timber treated with CUAZ-2 (Copper Azole). The retaining wall was made into the 4 layers of crossbar and the 3 layers of vertical-bar, of which the size was 86 cm high, 200 cm long and 96 cm wide. Type I was control and in Type II 20 cm vertical-bars and 93 cm vertical-bars were arranged alternately to decrease wood usage. TypeIII was similar to TypeII except that the connection between crossbars was reinforced with the wooden armature. In each type, the strength properties of retaining wall were investigated by horizontal loading test and the deformation of structure by image processing (AICON 3D DPA-PRO system). In horizontal loading test of Type I, Type II and Type III was 63.17, 57.80, and 60.97 kN/m, respectively. The deformation of the top layer in Type II was 1.5 times larger than in Type I and Type III. Consequently, the economic efficiency and strength performance were better in Type III than in Type I and Type II.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.388-393
• /
• 2018

In this paper, We developed a high efficiency reflector integrated type 50W AC direct connection type engine to realize miniaturization and weight reduction of product without using SMPS and to design a multistage varistor circuit Reduced costs by reducing the number of parts High reliability is achieved by using a circuit structure that does not use an electrolytic capacitor, thus increasing the lifetime of the LED. In addition, it is possible to manufacture an AC direct-coupled type driving device by using an IC semiconductor and apply an AC direct-coupled type driving device integrated with a reflector so that the lifetime of the device can be fully utilized for the lifetime of the LED, A light source having a plurality of light emitting diode channels including a plurality of light emitting diode channels arranged in series is driven with a rectified voltage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2399-2405
• /
• 2014

A fish-bone type bridge is vulnerable to the torsional behavior due to the single girder system with planar zigzag conformation. The fixed connecting area between the girder and pier is the special weak point because the torsional load creates excessive stress concentration. Therefore, the method to reduce the stress concentration is required. In this study, the reduction efficiency of various reinforcing types to reduce the excessive stress occurring at the connecting area is evaluated by using numerical analyses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.9 no.1
• /
• pp.61-73
• /
• 1985

The induction motor is widely used in the power equipments of the ship and the various industrial drive applications because it is robust and relatively simple and cheap to manufacture, but it has a disadvantage that the speed of induction motor is not controlled in wide range such as d.c motor. In this paper, the characteristics relating to the Kramer system that the speed of three phase wound type induction motor is controlled by changing the exciting e.m.f. of the secondary circuit is described. In order to analyze the characteristics, a new simplified and approximated T-type equivalent circuit from the Kramer circuit with three phase graetz connection and d.c machine is proposed. The stator current, motor torque and mechanical output power are computed by the current, torque and power equations derived by its equivalent circuit. Through the experiments, the $I_f-N$, torque-slip and current-slip characteristic curves of the tested motor are obtained and the various needed constants are determined. The numerical values obtained from the above method are compared with experimental values under the same conditions. As a result of the above investigation, it is found that the induction motor speed by the Kramer system is controlled by 28 per cent under the rated speed by changing the field current of d.c motor and the values computed by the current and torque equations derived by the simplified and approximated T-type equivalent circuit generally come to approach the experimental values.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.12-20
• /
• 2018

After the "Landscaping Law" was enacted in 2007 Korea, national and local governments has been responding swiftly by seeking various methods. Seoul Metropolitan City and other municipalities have established "Seoul Coloring and Systematization" project, which analyzes and extracts the humanities, humanities and natural environments in 2007 as an opportunity to recognize the importance of environmental color. However, it is necessary to slightly supplement the color scheme created by the observer's concept. In this way, you have to find the color of the environment in a city where real life takes place. The city's environmental color has the concept of "walking" as the basic human behavior. Because the average speed is 4km, it differs from that of a vehicle that travels more than 60km per hour. Also, most of the frontage zone is used except for special cases. Therefore the characteristics of the environmental color and frontage zone on the road side were concluded in this paper as Single Type, Connection Type, and Extension Type. In addition, the principle of environmental color of city was established by the change of texture according to space of time and the characteristics of urban scale, and new media characteristics were found in various interactions. The results of this study suggest an environmental coloring strategy for workability such as hue continuity, hue harmonization and integrated design.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1015-1019
• /
• 2001

This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current-fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1254-1260
• /
• 2010

In such special or precious occasions as a wedding ceremony, brides, handicapped or not, wish to wear a beautiful wedding dress. However, an ordinary wedding dress is not suitable nor convenient to a bride who has a bodily impediment. A one-piece type wedding dress, which even a normal bride needs assistants to help her wear, will create more inconvenience to crippled females. In this connection, this study is purposed to convert a normal ready-made wedding dress design into one suitable to the bodily handicapped females. For handicapped people on a wheelchair who generally put on and off a wedding dress while sitting on the chair, a one-piece type wedding dress is divided into the top and the skirt to make it a two-piece type wedding dress which is easy to get into and take off. The top should be separated from the skirt in such a manner that the wearer may not be aware of the division of the two pieces but easily put on and off since the sides or back of the top is opened. An opening is also given to the sides of the skirt so that handicapped people may sit on the skirt on the chair and then close the opening by themselves. Converting ready-made wedding dress design into functional clothes for handicapped people is really significant in that ready-made clothes can be recycled, their production cost reduced, and the economic burden of handicapped people relieved.

• Journal of architectural history
• /
• v.16 no.4
• /
• pp.131-148
• /
• 2007

This study aims at searching the Church Building Type and Design Sources of a German church architect who had designed many churches and other buildings in Korea. P. Alwin Schmid(1904-1978) had designed 188 Catholic buildings in Korea for 20 years from 1958 to 1978. In his works there are many excellent Catholic ritual buildings. It was caused by his conviction on the theology and the principles of Church Architecture. And His remarkable achievement is affected by the works of Dominikus Bom(1880-1955) and Rudolf Schwarz(1897-1961). Alwin's 5 plan type is relevant to Schwarz' iconographic model, and their approach to 'light' is much the same. But the Character of inner space is the middle of Dominikus Bom and Rudolf Schwarz. His works rotted in the Liturgical Movement had been developed in the line of connection with 20th German church architecture. The works of Dominikus Bom and Rudolf Schwarz played the role of the teacher of Alwin Schwarz.