• Steel and Composite Structures
• /
• 제36권4호
• /
• pp.447-462
• /
• 2020

The paper aims to investigate the mechanical mechanism and seismic effect of stiffeners in blind bolt endplate connection to CFST column. A precise 3D finite element model with considering the cyclic properties of concrete and steel materials was established, and the efficiency was validated through monotonic and cyclic test data. The deforming pattern and the seismic performance of the unstiffened and stiffened blind bolt endplate connections were investigated. Then a parametric analysis was conducted to analyze the contribution of stiffeners and the joint working behaviors with endplate under cyclic load. The joint stiffness classifications were compared and a supplement stiffness classification method was proposed, and the energy dissipation ability of different class connections were compared and discussed. Results indicated that the main deformation pattern of unstiffened blind bolt endplate connections was the local bending of end plate. The vertical stiffeners can effectively alleviate the local bending deformation of end plate. And influence of stiffeners in thin endplate and thick endplate was different. Based on the stiffness of external diaphragm welded connection, a more detailed rigidity classification was proposed which included the pin, semi-rigid, quasi-rigid and rigid connection. Beam was the main energy dissipation source for rigid connection. For the semi-rigid and quasi-rigid connection, the extended endplate, stiffeners and steel beam would all participate in the energy dissipation.

• 한국균학회지
• /
• 제15권4호
• /
• pp.250-253
• /
• 1987

원형질체내에 외래유전물질 도입에 의한 균주 개발의 가능성 검토의 일환으로 사철느타리의 원형질체로부터 핵을 분리하여 느타리의 원형질체내로 전이하여 얻은 결과는 다음과 같았다. 1. 핵전이주는 크게 3가지 type으로 구분되었는데 type 1은 아주 빠른 균사생장과 clamp connection를 형성하지 않으며 CM+benomyl에서 균총분리가 나타남으로서 이질이배체로 사료되었다. type 2는 주된 핵전이주로서 모균주와 비슷하거나 다소 빠른 균사생장과 clamp connection을 지녀 자실체를 형성하였으며 heterokaryon으로서 원형질체 융합주와 유사하였다. 그러고 type 3은 핵 또는 염색체 단편의 전이로 clamp connection를 지니지 않고 아주 느리거나 MM에서 생육이 거의 불가능한 균주였다. 2. 핵전이주 및 모균주를 전기영동법으로 esterase 동위효소 pattern을 조사한 결과 핵전이주는 모균주와 구별되었는데 type 1인 이질이배체는 새로운 band를 나타내었으며, type 2와 type 3은 모균주들을 합한 것으로 보였다.

• 전자공학회논문지B
• /
• 제31B권12호
• /
• pp.100-107
• /
• 1994

This article describes the hardware design scheme of Hamming MAXNET algorithm which is appropriate for binary pattern classification with minimum HD measurement between stimulus vector and storage vector. Circuit integration is profitable to Hamming MAXNET because the structure of hamming network have a few connection nodes over the similar neuro-algorithms. Designed hardware is the two-layered structure composed of hamming network and MAXNET which enable the characteristics of low power consumption and fast operation with biline volgate sensing scheme. Proposed Hamming MAXNET hardware was designed as quantize-level converter for simulation, resulting in the expected binary pattern convergence property.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 추계학술발표논문집 (하)
• /
• pp.1539-1542
• /
• 2003

최근 소프트웨어 개발에서의 핵심어인 객체지향(object oriented)은 1970년대 초부터 중요하게 인식 되기 시작했다. 현재는 객체지향에 대한 많은 관련 연구를 통하여 그 활용범위가 증대되고 있다. 본 연구에서는 객체지향 연구의 한 부분인 디자인 패턴 중에서 많이 이용되는 Iterator(Cursor) Pattern을 활용하여 닷넷(.NET) 기반에서의 특정 비즈니스를 위한 데이터 접속 객체를 연구하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.430-433
• /
• 1996

The shape of an object plays a very important role in pattern analysis and classification. Roughly, the researches on this topic can be classified into three fields, i.e. (i) edge detection, (ii) dominant points extraction, and (iii) shape recognition and classification. Many works have been done in these three fields. However, it is very seldom to see the research that discusses the connection relationship of objects. This problem is very important in robot assembly systems. Therefore, here we focus on this problem and discuss how to recover the connection relationship of planar objects. Our method is based on the partial curve identification algorithm. The experiment results show the efficiency and validity of this method.

• 한국산업정보학회논문지
• /
• 제8권2호
• /
• pp.21-29
• /
• 2003

8-이웃 연결값을 이용한 세선화알고리즘은 각 화소들 간의 연결성을 나타내는 연결값을 이용하여 원래의 형태에 가장 근접한 문자의 골격을 추출할 수 있다. 본 논문에서는 골격소멸현상이 없는 8-이웃 연결값을 이용한 세선화알고리즘에서 나타나는 침식현상에 관하여 고찰하였다. 제안된 세선화알고리즘은 직선선분이나 곡선선분 모두에 잘 적용 될 수 있음을 실험 결과로 나타내었다.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.541-562
• /
• 2015

This paper aims at developing the knowledge on the seismic behavior of dowel beam-to-column connections, typically employed in precast buildings in Europe. Despite the large diffusion of the industrial buildings, a high seismic vulnerability was exhibited by these structures, mostly due to the connection systems deficiencies, during some recent earthquakes (Emilia 2012, Turkey 2011). An experimental campaign was conducted on a typical dowel connection between an external column and a roof beam. In this paper, the performed cyclic shear test is described. According to the experimental results, the seismic response of the system is evaluated in terms of strength, stiffness and failure mechanism. Moreover, the complete damage pattern of the test is described by means of the instrumentations records. The connection failure occurred due to the concrete cover failure in the column (splitting failure). Such a mechanism corresponds to a negligible energy dissipation capacity of the connection, compared to the overall seismic response of the structure. The experimental results are also compared with the results of a similar monotonic shear test, as well as with some literature relationships for predicting the strength of dowel connections under horizontal (seismic) loads.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.379-400
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from the mandibular distal extension removable partial dentures with the mesial or distal placement of the occlusal rest and the mesial or distal connection in the back-action clasp with the five various designs of the back-action clasp, that is, the mesial connection and the distal rest, the distal connection and mesial rest, the mesial connection and mesial rest, the distal connection and the mesial and distal rest, and the mesial connection, and the mesial and distal rest. A photoelastic model was made of the epoxy resin(PC-1) and the hardner(PLH-1) with the acrylic resin teeth used and was coated with the plastic cement-1 at the lingual surface of the model and then five kinds of the removable partial dentures on the photoelastic model were set. A unilateral vertical load of 12.5 kg was applied on the central fossa of the first molar with the use of specially designed loading device and the pattern and distribution of the stress of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained. 1. In the back-action clasp with the mesial connection and mesial rest of the case 3, the effect of the stress distribution was the most favorable. 2. In the back-action clasp with the mesial and distal rest, of the case 4 and 5, the stress distribution was more greatly showed in the terminal abutment. 3. Generally, the stress distribution was more favarable in the mesial connection than in the distal connection. 4. In the back-action clasp with the mesial connection of the case 1, 3 and 5, the stress distribution was the most favorable in the mesial rest.

• 한국실내디자인학회논문집
• /
• 제15권3호
• /
• pp.155-162
• /
• 2006

Space is integrated or segment with organic formation by circulation path. It estimates important problem to grasp as factor that promote movement of visitor and space organization without grasping circulation as connection relation about simple space function from these viewpoint, is a thing which this study does not cause confusion to visitor's circulation path through data that analyze form of space connection and visitor's circulation path as quantitative in museum space and layout form that access by easy each unit exhibition grasps what it is. This study does factor grasping for guideline and inspection circulation path of layout by purpose in exhibition space on the basis of analytical result that grasps connection form between exhibition area that grasp laying stress on visitor's movement and appears in space through follow-up survey for circulation path of museum exhibition area. Space connection form that is expose by sequence of investigation and analysis(II) estimates on constituent affecting to visitor's circulation, and these do not speak for all space connection forms at the museum, but may systematize typology about connection form of unit spaces to utilize by indicator pointer of space planning if continue study to various spatial sphere more than hereafter. Unit exhibition area, divide connection form of space by grid and tree and laying stress on this quantitative data by spectator follow-up survey comparison and Estimate that space connection form provides partial basis of judgement for supposition that can promote direction and circulation path about visitor's movement if summarize result of investigation and analysis (III).