• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.381-389
• /
• 2003

Various adult diseases (cerebral apoplexy, athymiait, etc.) result from hypertension, blood circulation disturbance and increment of HBP. In early diagnosis of these diseases, MRI, X-ray and PET have been used rather aim for treatment than for a prevention of disease. Since. cerebral apoplexy and athymiait could appear to the regular/irregular persons, it is very important to measure HBP which has connection with cerebral blood flow state. HBP has more diagnosis elements than that of BP. So, we can diagnose accurate hypertension by measuring of HBP. But, existing sphygmomanometers and automatic BP monitors can not measure HBP, and can not execute complex function(measuring of BP/HBP, blood flow improvement). Purpose of this paper is to develop a system and algorithm which can measure BP/HBP for accurate diagnosis. Also, we extracted diagnosis factors by correlativity analysis of BP/HBP. Maximum pressure of HBP corresponds to 62% that of BP, Minimum pressure of HBP corresponds to 46% that of BP. Therefore, we developed the multi-function automatic blood pressure monitor which can measure BP/HBP and improve cerebral blood flow state.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.114-120
• /
• 2003

In order to provide fundamental data for development of controlled environment facilities in Korean ginseng (Panax ginseng C.A. Meyer) cultivation, field survey and analysis of structural and environmental engineering characteristics on the shading structures in ginseng fields (the ginseng houses) were carried out. In this study shading structures for ginseng cultivation were classified according to their structural materials, connection types, and detailed structures. That is they were classified into wood or steel frames, single or multi spans, and frame or cable types. As a result of the investigation, standardization of structural materials, fabrication and construction methods arc required. And it was considered that a reinforced design and a countermeasure for heavy snow are the most important matters for structural improvement. In parts of the environmental management, researches for setting up the irrigation standard are required in the first place. And it was investigated that an installation of the shading structures is a work being the most hard, taking a lot of time, and having need for automation. So controlled environment ginseng houses, with a low cost, a structural safety and a satisfactory workability, should be developed.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.617-629
• /
• 2020

In the historical and cultural blocks with the most concentrated urban cultural heritage, the development of both side streets is impacted by the development of the main street, which shows a gradual decline. The loss of placeness on both side streets has resulted in more empty houses. Therefore, it is urgent to pay attention and take countermeasures to the empty houses in historical and cultural blocks. In this study, the vacant houses on Zhongshan Road in Hangzhou, China were taken as the object of study to understand the location theory and the six dimensions of Matthew Carmona's urban design. Meanwhile, it further analyzed the evaluative features of the placeness of the vacant houses in the historical and cultural street, to provide direction and basis for the flexible using of other empty houses in Zhongshan Road. Then by applying the Analytic Hierarchy Process (AHP), it obtained the importance scale of each evaluative feature and compared the evaluation results of experts with the analysis results of cases, getting the results as follows: In the flexible application of vacant houses in historical and cultural street, the evaluation result of placeness indicates that this kind of usage should be in order of societal level, perceptional level, functional level, morphological level, visual hierarchy and temporal level; among the evaluative features, security, identity, usability, individuality, aesthetics, connection, diversity, openness, continuity, accessibility, order and history should be considered in turn.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.50-57
• /
• 2015

A traditional garden in Korea has diverse cultural, historical values, such as the then phases of the times, life phase, culture and art, etc. because it was developed on the basis of the harmony between nature and artificial structures. However, in reality, it's urgent to do efficient, continuous maintenance of traditional gardens which are being damaged and lost due to the problems like an owner's aging, inheritance, and lack of management, etc., especially in case of private property which was designated as a cultural property among such traditional gardens under the Cultural Properties Protection Law. Accordingly, this study conducted this research in a bid to use these research results as basic evidentiary materials for suggesting directivity in introduction of park planning of traditional gardens in folk houses in the near future by implementing the case investigation of transformation into public parks from traditional private gardens in Japan, which is putting the newly introduced park planning to efficient use, together with its systematic management, and the survey on domestic traditional gardens in folk houses status, as well as the hearing-based survey on a traditional gardens in folk houses owner's level of willingness to accept the introduction of parking planning. As a result, this study could confirm that in case of traditional gardens in Japan, they are mobilizing the revenue from admission fees for traditional gardens maintenance by incorporating the main entity of possession, and Japan is promoting transformation of traditional gardens into parks on the basis of use and preservation through the connection with local governments and research institutes. In addition, as a result of surveying domestic traditional gardens in folk houses, it was found that most of the garden owners had hardships in its management, and they were positive about systematic maintenance of gardens through park planning.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.15-25
• /
• 2012

In order to resolve transportation system focused on vehicles which have led to all sorts of problems such as traffic congestion, air pollution and so on, Korea recently have tended to center around Transit Oriented Development(TOD) which is capable of initiating public traffic demands. It is imperative to develop objective evaluation method which is able to measure pedestrian environment and amenity in order to facilitate green transit. The purpose of this paper is to present evaluation indices and measurement framework of pedestrian environment by analyzing effect on TOD major planning factors such as diversity, density, design, and supply etc. For this, we applied evaluation index with regard to TOD planning factors, investigating connection to pedestrian and employed AHP (Analytic Hierarchy Process) so as to quantify the result of measurement in Jongro 3ga and Hangangjin station. As a result, we presented relationship between travel patterns of pedestrian and each TOD planning factor. More importantly, the proposed framework is expected to make the best of the visualization as well as evaluation method for the pedestrian accessibility, convenience of public transportation, and the mixed land-use patterns in subway area and transit center.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.3
• /
• pp.11-19
• /
• 2009

Recently, concerns relating to the maintenance of large structures have been increased. In addition, the number of large structures that need to be evaluated for their structural safety due to natural disasters and structural deterioration has been rapidly increasing. It is common for the structural characteristics of an older large structure to differ from the characteristics in the initial design stage, and changes in dynamic characteristics may result from a reduction in stiffness due to cracks on the materials. The process of deterioration of such structures enables the detection of damaged locations, as well as a quantitative evaluation. One of the typical measuring instruments used for the monitoring of bridges and buildings is the dynamic measurement system. Conventional dynamic measurement systems require considerable cabling to facilitate a direct connection between sensor and DAQ logger. For this reason, a method of measuring structural responses from a remote distance without the mounted sensors is needed. In terms of non-contact methods that are applicable to dynamic response measurement, the methods using the doppler effect of a laser or a GPS are commonly used. However, such methods could not be generally applied to bridge structures because of their costs and inaccuracies. Alternatively, a method using a visual image can be economical as well as feasible for measuring vibration signals of inaccessible bridge structures and extracting their dynamic characteristics. Many studies have been conducted using camera visual signals instead of conventional mounted sensors. However, these studies have been focused on measuring displacement response by an image processing technique after recording a position of the target mounted on the structure, in which the number of measurement targets may be limited. Therefore, in this study, a model experiment was carried out to verify the measurement algorithm for measuring multi-point displacement responses by using a DIC (Digital Image Correlation) technique.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.523-530
• /
• 2008

In structural design provision, maximum punching shear stress of slabs is prescribed as combined stress in direct shear occurred by gravity load and eccentric shear occurred by unbalanced moment. This means that the effect of unbalanced moment is considered to decide the punching shear stress. However, from the resistance capacity standpoint, the effect of unbalanced moment strength is not considered for deciding punching shear strength. In this paper, a model considering interrelation between unbalanced moment and punching shear was proposed. In the model, the relation between load effect and resistance capacity in unbalanced moment and punching shear was two-dimensionally expressed. Using the interrelation model, a method how unbalanced moment strength should be considered to decide the punching shear strength was proposed. Additionally, effective width enlargement factors for deciding the unbalanced moment strength of flat plates with shear reinforcements were proposed. The interrelation model proposed in this paper is very effective for the prediction of the behavior of slab-column connection because not only punching shear and unbalanced moment strengths but also failure modes of flat plates can be accurately predicted.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.269-275
• /
• 2020

In this study, flexural tests of precast concrete panels according to the thickness of cross-sectional and the with or not of reinforcement were carried out in order to develop and assess of a lightweight precast concrete panel using ultra high performance concrete. For the test, four panels were fabricated, and consisted of one normal concrete panel and three ultra high performance concrete panels. As a test result, it was found that the plain precast panel using ultra high performance concrete had a lower flexural performance than the reinforced normal concrete panel, regardless of the cross-sectional size. The flexural performance of the hollow-sectional precast panel applying ultra high performance concrete, is improved by 150% compared to that of the reinforced normal concrete panel. That is, through additional performance verification and optimization of the cross-sectional design of the panel, the ultra high performance concrete precast panel can be made lighter. Also, the practical use of lightweight precast panels with ultra high performance concrete can be available through evaluation on shear, joint connection and anchoring, etc.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.149-169
• /
• 2009

Integrated Pollution Prevention and Control(IPPC) has become an idealistic environmental prevention concept in developed countries and corresponds with principles of Industrial Ecology. The concept of emissions regulatory integration is a key factor for an integrated environmental management system. While most EU member countries have a cross-media regulatory system, Korea has a media-specific regulatory system which was found to have significant environmental management problems. The purpose of this study is to integrate the emissions regulatory system by resolving difficulties through procedural, organizational, and substantive analysis of integration. To this end, the following research was performed: The first task was to determine the target of the integrated emissions regulatory system. In connection with this, the "IPPC directive" of the EU and the "PPCA 2000" schedule 1 of the UK, as well as environmental laws in Korea were compared and analyzed. The second was to design a regulatory system model. This model was divided into three groups after considerations were made regarding the time it would take for the pre-application,application, and permission stages. Lastly, on the basis of this research, a revised bill for an integrated emissions regulatory system was suggested. Nevertheless, substantive analysis of integration focused on BAT requires supplementation in order to make the integrated emissions regulation system operate normally as an environmental management policy and regulation method. To this end, the specific characteristics of Korean society, culture, and law should be actively considered.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.100-110
• /
• 2001

In this paper, we investigated several buffer management schemes for the design of shared-memory type ATM switches, which can enhance the utilization of switch resources and can support quality-of-service (QoS) functionalities. Our results show that dynamic threshold (DT) scheme demonstrate a moderate degree of robustness close to pushout(PO) scheme, which is known to be impractical in the perspective of hardware implementation, under various traffic conditions such as traffic loads, burstyness of incoming traffic, and load non-uniformity across output ports. Next, we considered buffer management strategies to support QoS functions, which utilize parameter values obtained via connection admission control (CAC) procedures to set tile threshold values. Through simulations, we showed that the buffer management schemes adopted behave well in the sense that they can protect regulated traffic from unregulated cell traffic in allocating buffer space. In particular, it was observed that dynamic partitioning is superior in terms of QoS support than virtual partitioning.