• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.111-124
• /
• 2004

This research is a part of a research program to verify the seismic performance of circular reinforced concrete bridge columns with respect to longitudinal steel connection details under cyclic lateral load. A total of 21 column specimens were constructed and tested. Main variables in this test program were longitudinal steel connection details(continuous, lap-spliced, and mechanically connected), confinement steel ratio, and axial force ratio, etc. The test results of the columns with different longitudinal steel connection details showed different failure mode, strength degradation, and seismic performance. From the quasi-static test, it was found that the columns with all longitudinal reinforcement lap-spliced showed significantly reduced ductility. However, seismic performance of the columns with half of longitudinal reinforcement lap-spliced showed limited ductility but much more ductile behaviour than the columns with all longitudinal reinforcement lap-spliced. It was also found that the seismic performance, failure mode and strength degradation of columns with mechanical connected longitudinal reinforcement were similar to those of columns with continuous longitudinal reinforcement.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.10 no.2
• /
• pp.99-106
• /
• 2004

This study attempts to provide the fundamental materials for space program in terms of planning a senior welfare center by means of examining and analyzing the present conditions of spatial arrangement of each section in senior welfare center for the aged. The results of the study are as in the following. 1) The demand for new service programs corresponding to the improved quality of the elderly and various social desires is relatively on the increase. Each program in senior welfare center for the elderly should be connected in an organic manner and the organization of space should be provided. 2) The section of counseling, the first step when using a welfare center, should be located in the entrance of the building and it has to be closely connected with other section. 3) The section of medical rehabilitation is a place mostly for the elderly in their frail physical condition; therefore, it is effective to use horizontal line. 4) It is important for the room for volunteers in the section for domiciliary welfare to be arranged flexibly with the office or the room for social education, and it is necessary to consider how easy daytime or short-term care is accessible. 5) The space where dynamic programs are progressed in the section of social education should be distinguished from the section of medical rehabilitation or the room for daytime care and the room for short-term care of the section of domiciliary welfare.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.73-79
• /
• 2015

There are three kinds of design method of the fire sprinkler systems. Grid type is connected all branch as a trapezoid. Loop type is connected cross-mains like circle. The last one is a tree type most commonly used. Grid type needs computer program to calculate the friction loss and flow rate apart from very simple form. In loop type, manual calculation is possible. Design engineer can draw up and calculate the demands without computer program. Because water supplies two direction in loop type, friction loss is smaller than tree type. Water distribution in operation area is uniform because of the small differences of sprinklers discharge pressure. Loop type is superior to tree type in respect of total pressure and flow rate. Using the small diameter pipe, the labor and construction cost will be decreased in the end. Loop type sprinkler design is rarely laid out because design engineers don't know the method. This paper is intended to inform that the loop type is better than the tree type in performance and economic point of view. And also this paper intend to use the loop type easily and widely.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.259-263
• /
• 2014

In the ICT field, one among the remarkable issue of in 2014 is the "Wear computer", that is, the opening of "Wearable Device" age. The Samsung galaxy gear and products like Google glass and Apple watch are done as the wearable device. According to the definition of MIT Media Lab, the wearable device adheres to the body and is included till the application which names all things doing the computing action and can perform the partial computing function. And the wearable device is one brain. If the wearable device is popularized, it will be changed many things. First of all, 2 hands become free. My body is due to be connected to 24 hours Internet. It is not level that it adheres the Smart phone or device to the body and the brain role in which the device is connected outside directly, the human body is done. In this paper, the related companies analyze the technical elements of this wearable device especially.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.616-621
• /
• 2003

Until now, many networked robots have been connected to the Internet for the various applications. With these networked robots, very long distance teleoperation can be possible through the Internet. However, the promising area of the Internet-based teleoperation may be distance learning, because of several reasons such as the unpredictable characteristics of the Internet. In robotics class, students learn many theories about robots, but it is hard to perform the actual experiments for all students due to the rack of the real robots and safety problems. Some classes may introduce the virtual robot simulator for students to program the virtual robot and upload their program to operate the real robot through the off-line programming method. However, the students may also visit the laboratory when they want to use the real robot for testing their program. In this paper, we developed an Internet-based robot education system. The developed system was composed of two parts, the robotics class materials and the web-based Java3d robot simulator. That is, this system can provide two services for distance learning to the students through the Internet. The robotics class materials can be provided to the student as the multimedia contents on the web page. As well, the web-based robot simulator as the real experiment tool can help the students get good understanding about certain subject. So, the students can learn the required robotics theories and perform the real experiments from their web browser when they want to study themselves at any time.

• Culinary science and hospitality research
• /
• v.12 no.1 s.28
• /
• pp.68-81
• /
• 2006

The purpose of this paper is to explore the possibility that green tourism involving traditional local foods could help reinvigorate local economy. The author examines some examples of developed countries to develop tour programs of the rural community and systematizes the local cuisine of Gwangju and Chonnam provinces. The source materials for this research include the data from the Office of Rural Development and interviews with the people concerned in June to July, 2005. The author starts with the literature review of written documents from various sources including the government, the Chonnam local government, periodicals and the internet. It seems necessary that we develop green tours involving unique local cuisines. To that purpose, the author claims that a variety of programs should be developed; (i) a public demonstration of traditional local foods, (ii) a hands-on experience program in which people can learn and cook by themselves, (iii) a tasting program of organic food and chemical-free produce, (iv) a program developing well-being food, and (v) lectures on healthy foods. The development of such green tours connected with the local cuisine will help vitalize the local economy and maintain tradition of the local cuisine.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.337-342
• /
• 2015

The company of 4 core materials that are needed for photovoltaic generation is located in area around this university in Gunsan, Saemangeum. And also, it was almost completed the value chain about the production of Polysilicon, Ingot, Wafer, modules and the design, construction of generation system. The industry-academy-government has understood that because of the relative companies' production and investment, it leads to a supply and demand of manpower and thus will have field centered manpower education. This program will help the problem of lack of manpower in relative companies by establishing competitive major agreement like vocational education system. Also, the university and the participating company in joint have pushed ahead field business education to make the least of industrial-education's mismatch, the training of professional manpower connected with related industries to make the universities chemical characteristics, companies securing excellent manpower and contributed to the revitalization of the regional economy. In this paper, are aware that photovoltaic industry is a future strategic industry for the country, so we will train the immediately site adapting manpower for the area of photovoltaic material and system as our goal. This is shown results of education operation for 4 years.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.2
• /
• pp.97-103
• /
• 2004

CHP system supplies electricity and heating together with high efficiency. Current utility's CHP system uses electric power by itself and sells thermal energy to KDHC(Korea District Heating Corporation). CHP's operation cost except sales revenue of heating was covered by the sale revenue of electricity. Thus Electric generation cost in district Heating CHP system has close relationship with the level of heating price. However, after the restructuring of electricity industry, the operation cost could not be covered by sales revenue of heating and electricity. This loss was compensated by energy subsidy program in the electric power industry infrastructure fund. This paper suggests reasonable evaluation and improvement methods of the loss calculation of CHP system utilizing the infrastructure fund efficiency In terms of the direction of support by the fund, it provides the methods to prevent inefficient operation through setting up the upper limit of subsidy and to improve the loss calculation. Moreover, it suggest fixed rate support by heating supply level and reducing subsidy gradually for an efficient operation of CHP system.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.16-23
• /
• 2014

This paper presents a renewable energy configuration plan of Micro grid in Gapa Island. To analyze the characteristics of Micro grid, BESS (Battery Energy Storage System), PMSG (Permanent Magnet Synchronous Generator) and SCIG (Squirrel Cage Induction Generator) are first modelled. The PMSG and SCIG will operate with basis on the real power curve. when the total power demand is larger than the total power generation, the BESS will be operated and the SOC (State Of Charge) is reduced. If the value of SOC could drop down to limited value, the system may be broken because of the voltage drop of BESS. To solve this problem, a DG (Diesel Generator) is used to charge the BESS and keep the voltage value of BESS with in a allowance limit. This paper represents simulation result when PMSG, SCIG connected to the Micro grid installed in Gapa Island. The simulation is carry out by using PSCAD/EMTDC program with actual line constant and transformer parameter in Gapa Island.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.51.3-51.3
• /
• 2017

To investigate the connection between radio activity and AGN outflows, we present a study of ionized gas kinematics by using [O III] ${\lambda}5007$ emission line along the radio jet for six radio AGNs. These AGNs are selected based on the radioactivity (L1.4GHz ${\geq}$ 1039.8 erg s-1) as well as optical properties as type 2 AGNs. By using the high spatial resolution of the Red Channel Cross Dispersed Echellette Spectrograph at the Multiple Mirror Telescope, we investigate in detail the [O III] and stellar kinematics. We spatially resolve and probe the central AGN-photoionization sizes, which is important in understanding the structures and evolutions of galaxies. We find that the typical central AGN-photoionization sizes of our targets are in range of 1.8-3.8 kpc. We study the [O III] kinematics along the radio jets to test whether there is a link between gas outflows in the narrow-line region and radio jet emissions. Contrary to our expectation, we find no evidence that the gas outflows are directly connected to radio jet emission.