• Korean Journal of Environment and Ecology
• /
• v.34 no.3
• /
• pp.249-258
• /
• 2020

This study aims to provide reference material for effective forest management techniques at the catchment scale, based on the field investigation of large woody debris (LWD) in 11 streams within a third-order forest catchment in Gangwon Province, Korea. To achieve this aim, we analyzed the morphological features of LWD pieces, and the storage and distribution status of LWD by stream order throughout the entire investigation. As a result, a total of 1,207 individual pieces of LWD were categorized into three types as follows: (ⅰ) 1,142 pieces (95%) as only trunk and 65 pieces (5%) as a trunk with root wad, (ⅱ) 1,015 pieces (84%) as non-thinned and 192 pieces (16%) as the thinned, and (ⅲ) 1,050 pieces (87%) as conifer and 157 pieces (13%) as broadleaf. Additionally, in-stream LWD loads (㎥/ha) decreased with increasing stream order, yielding 105.4, 71.3, and 35.6 for first-, second-, and third-order streams, respectively. On the other hand, the ratio of LWD jams to the total LWD volume increased with increasing stream order, yielding 11%, 43%, and 49% for first-, second-, and third-order streams, respectively. Finally, a comparison of the in-stream LWD load with previous studies in several countries around the world indicated that in-stream LWD load was positively correlated with forest stand age even though the climate, topography, forest soil type, forest composition, stand growth rate, disturbance regime, and forest management practices were different. These results could contribute to understanding the significance of LWD as a by-product of forest ecosystems and an indicator of riparian forest disturbance. Based on this, we conclude that advanced forest management techniques, including treatment of thinning slash and stand density control of riparian forest by site location (hillslope and riparian zone, or stream order), should be established in the future, taking the forest ecosystem and the aquatic environment from headwater streams to low land rivers into consideration.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.4
• /
• pp.67-89
• /
• 2022

This study aimed to elucidate the distribution of vascular plants on the Deok mountain in Ganghwa-gun, Korea. The results of 10 field surveys from March to October of 2019 identified 532 taxa in total, representing 482 species, 9 subspecies, 39 varieties, 1 form, and 1 hybrid in 318 genera and 105 families. The plant formation of Deok mountain is the deciduous broad-leaved and conifer mixed forest, which is the common one in the middle region of the Korean Peninsula. Among them, 301 taxa were newly recorded in this study, 7 taxa were endemic plants to Korea, 3 taxa were red list plants. The floristic target plants amounted to 41 taxa, specifically 1 taxon of grade V, 2 taxa of grade IV, 7 taxa of grade III, 9 taxa of grade II, and 22 taxa of grade I. Alien plants were recorded a total of 73 taxa with a naturalized index of 13.7%, the urbanization index was calculated to be 11.8% and 4 taxa were ecosystem disturbance plants.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.27-38
• /
• 2012

As the necessity of forest conservation and management has been increased, various forest studies using LIDAR data have been actively performed. These studies often utilize the tree height as an important parameter to measure the forest quantitatively. This study thus attempt to apply two representative methods to estimate tree height from airborne LIDAR data and compare the results. The first method based on the detection of the individual trees using a local maximum filter estimates the number of trees, the position and heights of the individual trees, and the mean tree height. The other method estimates the maximum and mean tree height, and the crown mean height for each grid cell or the entire area from the canopy height model (CHM) and height histogram. In comparison with the field measurements, 76.6% of the individual trees are detected correctly; and the estimated heights of all trees and only conifer trees show the RMSE of 1.91m and 0.75m, respectively. The tree mean heights estimated from CHM retain about 1~2m RMSE, and the histogram method underestimates the tree mean height with about 0.6m. For more accurate derivation of diverse forest information, we should select and integrate the complimentary methods appropriate to the tree types and estimation parameters.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.319-330
• /
• 2024

The present study aimed to investigate the death years of conifers to verify the time difference between landslide occurrence in 2011 and tree mortality near Chibanmok and Jangteomok shelters in the Jirisan National Park. Furthermore, abrupt growth reduction was also investigated to verify the living conditions when they were living. For the study, tree-ring analysis was conducted by selecting 14 living Abies koreana near the landslide area and 7 dead ones in the landslide area in the Chibanmok site, and 13 living conifers (7 Picea jezoensis, 5 A. koreana, and 1 Pinus koraiensis) near landslide area and 4 dead ones (2 P. jezoensis and 2 A. koreana) in landslide area in the Jangteomok site. Using the tree-ring samples from living A. koreana 137-year long chronology (1885-2021) was established for the Chibanmok site and 364- and 65-year long P. jezoensis (1658-2021) and A. koreana (1957-2021) chronologies was built for the Jangteomok site. Through the synchronization test between the tree-ring time series from dead conifers and the corresponding chronologies, it was verified that the death of conifers in the landslide areas occurred after 2011, when the landslide happened, except for only one tree. It was further verified through the abrupt growth reduction test that the growth condition of dead conifers before the landslide in 2011 was satisfactory.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.115-123
• /
• 2020

The vertical distribution of vegetation can be classified according to the altitudinal gradient and the distribution of species along this gradient. The purpose of this study was to analyze the vegetation structure, species composition, dimensional density, and change according to altitude. These data illustrate the distribution of coniferous forest by altitude. By order of importance, the vegetation structure of this mixed forest consisted of Abies nephrolepis (12.2), Pinus koraiensis (10.86), and Acer komarovii (8.11). As a result of species composition according to the altitude, A. nephrolepis and Maianthemum bifolium increased in importance with increasing altitude. Tripterygium regelii emerged between 1,400 m and 1,600 m, which indicates that forest gaps were frequent at that elevation. The species diversity index was the highest from 1,400-1,500 m and coincided with the presence of forest gaps. The changes in A. nephrolepis of evergreen conifers increased significantly from 402 ± 5.4 ha.^-1 to 528 ± 11.6 ha.^-1 for two years, and decreased from 57 ± 1.3 ha.^-1 to 56 ± 1.6 ha.^-1 for P. koraiensis. The density of A. nephrolepis and P. koraiensis seedlings significantly increased at 1,500-1,600 m. The results of this study can be used as a basis to identify the mast seeding year with the increase or decrease of seedlings. In addition to documenting the evergreen conifer population of the Seorak Mountain, these results can be built upon for future monitoring of seedlings mortality.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.1-7
• /
• 1976

This study was performed in Bo-Eun Gun, Chung-Cheong Buk Do. The forest types having been classified, the each area was measured by dot-grid method. The 820 sample points having been obtained by systematic sampling method, the tree heights, crown densities, crown diameters in the points were measured on the aerial photography, and the volumes per hectare were estimated by the comparison with stereogram. Thirty eight plots, which amounted to about 4.5% of all the sample points, were sampled with double sampling method and volume were measured by the ground survey method. the results were summarized as follows; 1. There is no significant differentia between the values measure by dot-grid method and the statistical values obtained by the authority for the area. 2. There is no significant differentia between the estimated values and the measured values for the volume. And the coefficient (b) was 1.18. 3. The heights of conifer trees were easily measured more or less, but it was some difficult for the deciduous trees, because the tops of trees were not observed easily. 4. All the values had a tendencies to be overestimated in the low stocked stand and to be underestimated in the high stocked stand. 5. When the aerial volume table method by ground checking needs to be used together, the work should be performed by the experienced technician and the photgraphic volume table should be made in advanced of the work.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.277-285
• /
• 2019

This study was conducted to understand the growth characteristics of Picea jezoensis that was one of representative subalpine species in Korea, in the light of the effects of wind and micro-topography in its habitats on Mt. Deogyu, Korea. The prevailing wind directions were southwest and west at the study sites. We randomly selected P. jezoensis (height ≥ 1.5 m) on windward, intermediate, and leeward slopes and measured diameter at breast height (DBH), height, crown length by 8 directions in upper, middle and lower sectors of the crown. We examined the micro-topography of P. jezoensis stood on and classified it into 3 types: type 1 was mounded and fully exposed to surrounding environments without neighboring trees; type 2 was somewhat wind-protected by surrounding rocks, but no neighboring vegetation; type 3 was on gentle slope or flat where P. jezoensis grew with neighboring trees or shrubs. The ratios of height to DBH, and estimated crown growth to actual crown growth (hereafter crown growth ratio) were compared among the three types of micro-topography on windward, intermediate and leeward sites. The height growth per DBH and crown growth ratio in the upper and middle crowns were the smallest on the windward site, and the highest on the leeward site (p < 0.01). The crown growth ratio on type 1 on the windward site was only 46% of that on type 3 on the leeward site. Although on the same windward slope, trees on type 1 had more deformed crown shapes than that on Type 3, showing asymmetric crown cross-sectional areas. Wind and micro-topography played critical roles on the crown growth of P. jezoensis.

• Korean Journal of Environmental Biology
• /
• v.38 no.3
• /
• pp.371-387
• /
• 2020

This study was conducted to investigate the flora of Mt. Unbongsan in the basalt areas of Korea. From the results of eight field surveys undertaken from March to October 2017, we identified 404 total taxa, representing 364 species, seven subspecies, and 33 varieties, which were placed in 256 genera and 91 families. The plant formation of Mt. Unbongsan is a deciduous broad-leaved and conifer mixed forest, which is common in the middle part of the Korean peninsula. Most of the mountain is covered by a young secondary forest, which is mainly composed of Quercus monglica and Pinus densiflora. Out of these 404 taxa, 193 were the first records for the region, six were endemic to Korea, three were listed on the Korean Red List of threatened species, 34 were floristic target species, and 40 were invasive alien species. The naturalized index(NI) percentage was 9.9%. Mt. Unbongsan has plant diversity, which was associated with the geomorphological landscapes. We considered that the composition and distribution of the species were affected by different environmental factors according to the presence of granite, taluses, block streams, drying ridges, valleys, puddles, wetlands, and streams.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.396-408
• /
• 1996

The purposes of this study were to standardise the forest working system to design the intensity of working system in felling operation of the thinning forest in our country as well as to contrive the improvement of working method and the increase of productivity. For the purpose of investigating these, element working was classified by felling operation in softwood thinning forest, and a pulse rate were measured and analyzed. The results were as follow : 1. From the analysis of the pulse frequence measurment, the average pulse showed 108 pulse per minute for worker A in the total of pure working time, 130 pulse per minutes for worker B, 119 pulse per minute for worker C and 125 pulse per minute for worker D, respectively. 2. From the results of the pulse frequence analysis according to element working classification, the highest pulse frequence represented 115 pulse per minute for worker A in the circumference, 131 pulse per minute for worker B in the movement, 122 pulse per minute for worker C in the limbing operation and 128 pulse per minute for work D in hang-up. 3. If the original pulse frequence was 100% for workers, the working intensity showed as follow : worker A was 160%(original pulse frequence was 61=100%) for the total of the working intensity and 188% for the circumference among element working. Worker B was 220%(original pulse frequence was 57=100%) for the total of the working intensity and 229 for movement among element working. Worker C was 159%(original pulse frequence was 73=100%) for the total of the working intensity and 168% for limbing operation among the element working. Worker D was 156%(original pulse frequence was 70=100%) for the total of working intensity and 182% for hang-up among element working. 4. At the limit point of Labor performance rating, showing the total of working intensity, overtime pulse rate per minute was 30 for worker A, 207 for worker B, 14 for worker C and 67 for worker D. Worker B was highest in working intensity, and got physically a big load.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.33-40
• /
• 2009

From 2006 to 2008, natural habitat of Sparassis crispa were surveyed for investigating ecological conditions at sixteen different sites in Korea. The investigated sites showed very wide altitudinal distribution ranged from 240 meters to 1,100 meters above the sea level. In general, S. crispa showed distinct feature of heart-rot fungi as it occurs on soils around the stems of larch (Larix kaempferi) and Korean white pine (Pinus koraiensis). But it also could be found on stems or on the stumps of dead trees, which indicated that the fungus might have several invasion routes and capabilities to grow on various ecological conditions. All of the sixteen sites were pure stands consisted with conifers such as larch or Korean white pine. The dominant tree layer showed $15.3{\sim}38.0$ meters for tree heights, thicker than twenty centimeters for the diameter at breast height (DBH), and all of them were older than thirty years. Since the stands were pure stand, species diversity of trees in the sites was extremely low. While the dominant tree layer showed only pure coniferous stand, the co-dominant tree layer, shrub layer and herbaceous layer showed more diverse features with higher Shannon-Wiener (H') indices. Soil texture of thirteen sites among sixteen investigated sites were loamy soils, and the contents of organic matter in soil were more or less higher than general forest soils in Korea with $3.79{\sim}14.32%$. The cation exchange capacity (CEC) was also relatively higher than general forest soils with $16.1{\sim}27.2$ cmol+/kg. The data indicated that the cauliflower mushroom occurring sites were relatively fertile than general forest soils. The soils were acidic with pH ranged from 4.2 to 5.2, which were typical features for conifer stands in Korea.