• 지능정보연구
• /
• 제7권1호
• /
• pp.149-159
• /
• 2001

최근 전자상거래에는 일대일 마케팅이나 협력적 정보여과기법등을 이용한 다양한 추천서비스가 도입되고 있다. 이러한 추천 서비스의 형태는 다양한 제약 조건을 갖고 계산 복잡도가 높은 제품의 경우에는 고객을 만족시킬 만큼 적절한 추천서비스가 이루어지기 어려울 것으로 본다. 본 논문에서는 Clancey의 Classification Problem Solving 방법과 제약조건 기반 Configuration기술을 통합하여, 이러한 문제를 해결할 수 있는 방법을 제시하였다. 이 방법은 Clancey의 이론에 따라 구성 복잡도가 높은 제품의 해집합 도메인을 분할하여 문제의 복잡도를 줄일 수 있도록 하였으며, 여기에서 선택된 도메인을 제약조건 기반 Configuration기술에 적용시킴으로써, 구매자와 제품 컴포넌트 사이에 존재하는 제약조건을 처리할 수 있도록 하였다. 제약조건기반 Configuration기술은 구매자에게 적합한 제품을 구성하기 위해서 제막 조건 판촉 문제(Constraint Satisfaction Problem; CSP)해결 기법을 이용한다. 또한 Clancey이론은 구매자의 만족도를 고려하기 위해서 정보검색 분야의 벡터공간 모델링 방법을 변형하여 적용하였다. 마지막으로 본 모델의 평가를 위해 전체 시스템의 수행시간 및 구매자 만족도를 비교 분석하였다

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.131-135
• /
• 2006

The aerodynamic characteristics of a T-50 aircraft configuration are investigated by a subsonic panel method. Panel methods are best applicable to the lifting surfaces such as wings and airfoils. Source and doublets are used in the present code as a basic singularities of the panel technique. The panel method is first assessed by applying it to several benchmark problems for which other solutions and experimental data are available, such as a swept wing and wing body configuration. The prediction results are compared with experimental data and show good agreement in all cases considered. Finally, the method is applied to a T-50 aircraft configuration and excellent agreement with flight test data in lift coefficients is found.

• 한국강구조학회 논문집
• /
• 제16권6호통권73호
• /
• pp.819-832
• /
• 2004

본 연구는 구조물의 형상 최적화를 효율적이면서 보다 용이하게 수행할 수 있는 기법을 제안하고자 하였다. 구조물의 형상 표현과 설계변수 선택을 위해 설계요소 개념을 활용하여 설계변수 수를 과감하게 줄일 수 있었고, 등매개변수 사상기법을 이용하여 최적화 과정 중 형상의 변화에 따른 유한요소망을 자동생성 하였으며 효율적인 최적화 과정 수행을 위하여 결정론적 최적화 기법(개선된 허용방향법)과 스토캐스틱 최적화 기법(유전 알고리즘)을 사용하여 그 결과와 효율성을 비교하였다. 최적화 과정 중 구조해석은 유한요소법을 이용하며 구조물의 부피와 단면적 등을 목적함수로 하여 형상 최적화를 수행하였다. 또한 제작성과 시공성을 위한 최종형상 제시를 위하여 최적형상에 완화곡선 처리를 시도하였다. 이상의 연구를 강구조물을 대상으로 한 몇 가지 수치 예에 적용한 결과 설계과정을 보다 단순화시켰으며, 두 가지 기법 모두 최적해에 수렴함으로써 목적함수 값을 효과적으로 개선시킬 수 있었다. 따라서 본 연구는 그 타당성과 적용성이 있다고 판명된다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.466-473
• /
• 2018

This paper presents an estimation method for the static configuration of a steel lazy wave riser (SLWR) using the dynamic relaxation method applied to estimate the configuration of structures with strong geometric non-linearity. The lumped mass model is introduced to reflect the flexible structural characteristics of the riser. In the lumped mass model, the tensions, shear forces, buoyancy, self-weights, and seabed reaction forces at nodal points are considered in order to find the static configuration of the SLWR. The dynamic relaxation method using a viscous damping formulation is applied to the static configuration analysis. Fictitious masses are defined at nodal points using the sum of the largest direct stiffness values of nodal points to ensure the numerical stability. Various case studies were performed according to the bending stiffness and size of the buoyancy module using the dynamic relaxation method. OrcaFlex was employed to validate the accuracy of the developed numerical method.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1763-1772
• /
• 2016

To reduce system complexity and implementation costs, fully-controlled H-bridge (FHB) modules and diode H-bridge PFC (DHB) modules are cascaded to form a hybrid cascaded H-bridge rectifier (HCHR). In this paper, the advantages of such a HCHR over other cascaded rectifiers are analyzed depending on the numbers of FHB modules and DHB modules. Therefore, to assign proper numbers to these two kinds of modules for the HCHR, a configuration determination method is investigated under balanced and imbalanced loads. Three principles are also presented to guide the configuration determination for the HCHR. In addition, the constraints for selecting the step-up ratio and filter inductance are derived based on a phasor diagram analysis. The proposed configuration determination method is validated by simulations under three different conditions in the PSIM environment. Finally, experiments are carried out on a scaled-down prototype where the configuration can be easily adjusted. The feasibility of the proposed theory is then verified by experimental results.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4733-4738
• /
• 2013

본 연구에서는 구속조건을 가진 기계계의 동적 평형위치를 다물체 동역학 해석방법을 이용하여 계산하였다. 다물체계에서 얻어지는 시간 구속조건을 가진 구속조건식과 동역학식으로부터 독립좌표계로 이루어진 동적평형식을 유도하였다. 동적 평형식은 구속조건식과 함께 비선형 대수방정식의 형태로서 Newton-Raphson 방법을 이용하여 수치해를 구하였다. 제안된 동적 평형 계산 방법을 조속기에 적용하여 동적 평형위치를 구하였다. 해석결과는 상용 프로그램의 동역학해석을 통한 평형위치의 결과와 비교하여 타당성을 검증하였다. 조속기의 회전 각속도에 대한 평형위치를 계산하고 설계 파라미터에 대한 평형위치의 영향을 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2783-2804
• /
• 2021

In the network function virtualization environment, dynamic changes in network traffic will lead to the dynamic changes of service function chain resource demand, which entails timely dynamic adjustment of service function chain resource configuration. At present, most researches solve this problem through virtual network function migration and link rerouting, and there exist some problems such as long service interruption time, excessive network operation cost and high penalty. This paper proposes a dynamic adjustment method of service function chain resource configuration for the dynamic changes of network traffic. First, a dynamic adjustment request of service function chain is generated according to the prediction of network traffic. Second, a dynamic adjustment strategy of service function chain resource configuration is determined according to substrate network resources. Finally, the resource configuration of a service function chain is pre-adjusted according to the dynamic adjustment strategy. Virtual network functions combination and virtual machine reusing are fully considered in this process. The experimental results show that this method can reduce the influence of service function chain resource configuration dynamic adjustment on quality of service, reduce network operation cost and improve the revenue of service providers.

• 산업기술연구
• /
• 제29권B호
• /
• pp.47-56
• /
• 2009

University is very big scale among urban facilities as for single facilities and there is characteristic that accompany various university support functions in contiguity area. Width that have diverse spatial configuration generally our country university campus around was formed, this does function that connect university and ambit. Specially, formation enables change of spatial configuration that existent width system has if is new around university campus. Also, can form more animate and lively width spatial configuration by forming more various and complex width spatial configuration in width had formed in existing. It is that search special quality of university surrounding width spatial configuration analyzing existing width spatial configuration of Kangwon National University back gate by formation if this study is new in city and forecasts the change, and used space syntax by spatial configuration analysis method.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3804-3821
• /
• 1996

The configuration optimization is a structural optimization method which includes the coordinates of a structure as well as the sectional properties in the design variable set. Effective reduction of the weight of discrete structures can be obrained by changing the geometry while satisfying stress, Ei;er bickling, displacement, and frequency constraints, etc. However, the nonlinearity due to the configuration variables may cause the difficulties of the convergence and expensive computational cost. An efficient approximation method for the configuration optimization has been developed to overcome the difficulties. The method approximates the constraint functions based onthe second-order Taylor series expansion with reciprocal design variables. The Hessian matrix is approzimated from the information on previous design points. The developed algotithms are coded and the examples are solved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.116.4-116
• /
• 2001

We consider a robust configuration problem of inertial sensors for inertial navigation system(INS). Fault detection and isolation(FDI) is necessary to improve reliability of the system. For FDI, there used to be more than three mutually orthogonal sensors and thus we have to consider configuration methods of sensors. Various studies in this area have been done, but the former results did not consider effect of uncertainty(misalignment, scale factor error) to determine the configuration of the sensors. In this paper robust configuration of sensors is proposed through sensitivity analysis. Also total least square(TLS) method ...