• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.95-105
• /
• 2022

The purpose of this study was to examine gender differences in response to work-life balance(WLB) and to investigate the effect of WLB on parenting confidence and to examine the moderating role of career management in the relationship between WLB and parenting confidence. Through SPSS 18.0, the model structure was tested between WLB, parenting confidence, and career management by a t-test, regression test, and hierarchical regression test. A total of 505 cases were analyzed. The major findings were as follows: First, it was found that there was no difference in the level of WLB by gender. Second, it was found that there was a positive relationship between WLB and parenting confidence. Third, it was found that career management moderated the relationship between WLB and parenting confidence. Based on the findings, practical implications about married female workers and the importance of WLB in the organizations were discussed.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.3956-3972
• /
• 2023

The floor response spectrum (FRS) is used to evaluate the seismic demand of equipment installed in nuclear power plants. In the conventional design practice of NPP structure, the FRS is simplified using the lumped-mass stick model (LMSM), assuming the floor slab as a rigid diaphragm. In the present study, to study the variation of seismic response in a floor, the FRSs at different locations were generated by 3-D finite element model, and the response was compared to that of the rigid diaphragm model. The result showed that the FRS significantly varied due to the large opening in a floor, which was not captured by the rigid diaphragm model. Based on the result, seismic fragility analysis was performed for the anchorage of a heat exchanger, to investigate the effect of location-dependent FRS disparity on the high confidence low probability of failure (HCLPF).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.672-676
• /
• 2002

In this paper, a reliability-based design optimization method, which enables the determination of optimum design that incorporate confidence range for structures, is studied. Response surface method and Monte Carlo simulation are utilized to determine limit state function. The proposed method is applied to the I-type steel structure for reliability based optimal design.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.631-638
• /
• 2006

This paper considers the nonlinear direct spectrum method to estimate seismic performance of mixed building structures without iterative computations, given dynamic property $T_1$ from stiffness skeleton curve and nonlinear pseudo acceleration $A_{1y}$ and/or ductility ratio $\mu$ from response spectrum. Nonlinear response history analysis has been performed and analysed with various earthquakes for evaluation of correctness and confidence of nonlinear direct spectrum method.

• Earthquakes and Structures
• /
• v.17 no.5
• /
• pp.511-519
• /
• 2019

The concrete gravity dam is one of the most important parts of the nation's infrastructure. Besides the benefits, the dam also has some potentially catastrophic disasters related to the life of citizens directly. During the lifetime of service, some degradations in a dam may occur as consequences of operating conditions, environmental aspects and deterioration in materials from natural causes, especially from dynamic loads. Cumulative Absolute Velocity (CAV) plays a key role to assess the operational condition of a structure under seismic hazard. In previous researches, CAV is normally used in Nuclear Power Plant (NPP) fields, but there are no particular criteria or studies that have been made on dam structure. This paper presents a method to calculate the limitation of CAV for the Bohyeonsan Dam in Korea, where the critical Peak Ground Acceleration (PGA) is estimated from twelve sets of selected earthquakes based on High Confidence of Low Probability of Failure (HCLPF). HCLPF point denotes 5% damage probability with 95% confidence level in the fragility curve, and the corresponding PGA expresses the crucial acceleration of this dam. For determining the status of the dam, a 2D finite element model is simulated by ABAQUS. At first, the dam's parameters are optimized by the Minitab tool using the method of Central Composite Design (CCD) for increasing model reliability. Then the Response Surface Methodology (RSM) is used for updating the model and the optimization is implemented from the selected model parameters. Finally, the recorded response of the concrete gravity dam is compared against the results obtained from solving the numerical model for identifying the physical condition of the structure.

• Communications for Statistical Applications and Methods
• /
• v.24 no.2
• /
• pp.163-172
• /
• 2017

Economic sentiment is typically measured using ordinary response options. The University of Michigan and the United States Conference Board are two widely used major indexes that have separately established independent consumer sentiment indexes based on three-level ordinary response options: positive, neutral, and negative. Notwithstanding, limited attention has been paid to the structural differences in their built-in formulas, which are referred to the disparate micro scoring schemes applied to an individual question. This paper examines the structural difference of the two indexes and then addresses situations where one is more reliable than the other. Real data from business tendency surveys of the Organization for Economic Cooperation and Development are used to illustrate our points empirically. As a conclusion, it is stressed that the two indexes should be handled with care when applied to economic sentiment comparison studies.

• Toxicological Research
• /
• v.34 no.4
• /
• pp.303-310
• /
• 2018

The methods of applied genetic toxicology are changing from qualitative hazard identification to quantitative risk assessment. Recently, quantitative analysis with point of departure (PoD) metrics and benchmark dose (BMD) modeling have been applied to in vitro genotoxicity data. Two software packages are commonly used for BMD analysis. In previous studies, we performed quantitative dose-response analysis by using the PROAST software to quantitatively evaluate the mutagenicity of four piperidine nitroxides with various substituent groups on the 4-position of the piperidine ring and six cigarette whole smoke solutions (WSSs) prepared by bubbling machine-generated whole smoke. In the present study, we reanalyzed the obtained genotoxicity data by using the EPA's BMD software (BMDS) to evaluate the inter-platform quantitative agreement of the estimates of genotoxic potency. We calculated the BMDs for 10%, 50%, and 100% (i.e., a two-fold increase), and 200% increases over the concurrent vehicle controls to achieve better discrimination of the dose-responses, along with their BMDLs (the lower 95% confidence interval of the BMD) and BMDUs (the upper 95% confidence interval of the BMD). The BMD values and rankings estimated in this study by using the EPA's BMDS were reasonably similar to those calculated in our previous studies by using PROAST. These results indicated that both software packages were suitable for dose-response analysis using the mouse lymphoma assay and that the BMD modeling results from these software packages produced comparable rank orders of the mutagenic potency.

• Computers and Concrete
• /
• v.21 no.5
• /
• pp.485-493
• /
• 2018

Statistical analysis has found useful application in the design of experiments (DOE) especially optimization of concrete ingredients however, to be able to apply the concept properly using computer aided applications there has to be an upper and lower limits of responses fed to the system. In this study, the production of high-performance steel fiber concrete (HPSFC) at five different fiber addition levels by volume with two aspect ratios of 60 and 83 were studied under two curing methods completely dry cured (DC) and moist cured (MC) conditions. In other words, this study was carried out for those limits based on material properties available in North Cyprus. Specimens utilized were cubes 100 mm size casted and cured for 28 days and tested for compressive strength. Minitab 18 statistical software was utilized for the analysis of results at a 5 per cent level of significance. Experimentally, it was observed that, there was fluctuation in compressive strength results for the two aspect ratios and curing regimes. On the other hand P-value hypothesis evaluation of the response showed that at the stated level of significance, there was a statistically significant difference between dry and moist curing conditions. Upper and lower limit values were proposed for the response to be utilized in DOE for future studies based on these material properties. It was also suggested that for a narrow confidence interval and accuracy of the system, future study should increase the sample size.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1430-1435
• /
• 2003

Satellite upper platform is optimized by response surface method which has non-gradient, semi-glogal, discrete and fast convergency characteristics. Sampling points are extracted by design of experiments using Central Composite Method and Factorial Design. Also response surface is generated by the various regression functions. Structure analysis is execuated with regard for static and dynamic environment in launching stage. As a result response surface method is superior to other optimization method with respect to optimum value and cost of computation time. Also a confidence is varified in the various regression models.

• Journal of the Korean Society of Costume
• /
• v.51 no.6
• /
• pp.117-128
• /
• 2001

The purposes of this study was to investigate discriminative factors of clothing buying intention on Internet shopping mall. The sample included 435 male(44.8%) and female(55.2% ) adults, and an instrument was developed based on previous studies. The statistical analysis used for this study were factor analysis, 1-test, and LISREL. The results of factor analysis showed that consumers evaluated apparel internet shopping attributes based on perceptional dimensions of internet shopping consisted of clothing quality and value. web service quality and value, and adoption of internet shopping. Each dimension has sub-factors as follows: (1) clothing quality was perceived as 'artistry' 'sociality' and 'practicality'. (2) web interface service quality was perceived as 'visuality', 'advantage', 'response', 'dependability' and 'buying-confidence'. (3) internet shopping adoption was perceived as 'usefulness' and 'convenience'. T-test revealed that consumer's buying intention, re-entry intention, and store attitude were differed concerning all sub-factors including 'usefulness' and 'convenience' in adoption of Internet shopping dimension. As a result of LISREL, clothing buying intention path model was set up as following path. (1) 'artistry', 'sociality' and 'practicality' of clothing quality affected clothing value perception positively. (2) 'visuality', 'advantage', 'response' and 'buying-confidence' of web service quality affected web service value perception positively. (3) clothing and web service value perception affected store attitude positively. (4) store attitude affected clothing buying intention positively. However, Adoption of Internet shopping dimension that was perceived as usefulness and convenience did not affect clothing buying intention path model. Therefore, consumers buying, intention model in internet circumstance could be used nearly the same as real market circumstance.