• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.209-215
• /
• 1991

The propose of this study was to evaluate the effect of the variuos antiseptic solutions and distilled water on physical properties of endodontic gutta-percha cone. The antiseptic solutions were 70% isoprophyl alcohol, 5% NaOCl and 2.5% NaOCl, as control gutta-percha cones, did not stored antiseptic solution was used. Observation periods were 1, 5, 10, 20, and 30 days. In each group,. the 15 gutta-percha cones used. A tensile strength and elongation rate measurements were performed with Instron (Instron 4501), cross - head speed was set 10 inch / min. The data were statistically analyzed and the results were as followed. 1. The tensile strength of the gutta-percha cones, stored in distilled water, were slightly decreased (p<0.05). Elongation rate was not significantly different 2. The tensile strength of the gutta-percha cones, stored in 70% isopropyl alcohol, were increased (p<0.01) except 1 day group. 3. The tensile strength of the gutta-percha cone, stored in 2.5% NaOCl, were decreased (p<.0.05). Elongation rate significantly decreased (p<0.01). 4. The tensile strength of the gutta-percha cone, stored in 5% NaOCl, were decreased (p<0.05). Elongation rate significantly decreased (p<0.01). These results showed that the changes of physical properties (tensile strength and elongation rate) in gutta-percha cone were developed after a day' when gutta-percha cone were stored at 70% isopropyl alcohol, 2.5% or 5% NaOCl. So, It was concluded that gutta-percha cone must have been used at least within one day, when they were stored at the above antiseptics. I thought that the study of substantial effects on endodontic treatment due to changes of physical properties in gutta-percha cone will be needed.

• Korean Journal of Plant Resources
• /
• v.22 no.6
• /
• pp.535-539
• /
• 2009

The time of seed collection is regarded as one of major concerns to obtain sound seeds. The physical and germinal aspects of Cryptomeria japonica D. Don (Taxodiaceae) seeds were analyzed to determine the optimum harvesting time in Korea. Cones were picked every 10 days from the $30^{th}$ of July to the $30^{th}$ of October in both 2005 and 2006. Seeds were collected from picked cones. Seed size and weight were not significant in two consecutive years. The 1,000-seed weight was 3.3 g for cones picked at the $18^{th}$ of August and 5.3 g for cones picked at the $30^{th}$ of September. The size of seeds was increased as the time of collection from the $18^{th}$ of August to the $30^{th}$ of September: from 19.3 mm to 21.3 mm in length and from 15.8 mm to 18.5 mm in width. Average germination rates in 2005 was 18.3% and 19.6% in 2006. The highest germination rate was 34.3% from seeds collected at the $30^{th}$ of September in 2005. In 2006, the highest germination rate was 31.7% for seeds collected at the same date as the 2005 seeds. After the end of September, germination rate was decreased in both years. The results implied that the best cone picking time for Korean C. japonica seeds is around the end of September.

• Korean Journal of Acupuncture
• /
• v.30 no.3
• /
• pp.178-184
• /
• 2013

Objectives : The warm needling technique is the method combining the effects of acupuncture needle with those of moxibustion. We need to standardize the characteristics of the warm needling technique, in order to get more systematic and objective results in operation and effects and then get more clinical abilities in these fields. Methods : In this study, using labview system on the warm needling technique, we measured and compared partial temperature changes according to the kind of needle. We studied relations of moxa cones of various sizes with the peak combustion temperature. Results and Conclusions: When we measured the warm needling's partial temperature, temperature measured at 1 and 2 cm below the head, according to the kind of needle, gold needle got the higher result on the peak than SS304 stainless steel needle. In the case of combustion of the moxa cones, cones weighing 0.4 g and 0.8 g, respectively, and the apex ignition method with gold needle showed the higher result than the apex ignition method with stainless steel needle, when we measured the effective stimulus time at 2 cm below the head and the mean temperature during the effective stimulus time. Although more research to standardize the characteristics of the warm needling technique will be needed, we suggest, according to these results, that warm needling of gold needle combined with moxa cone of 0.4 or 0.8 g is effective.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.119-119
• /
• 2019

Pinus densiflora, the Korean Red Pine, is the predominant tree species of the cool, temperate forests of northeast Asia, occurring in pure stands across Korea, Japan, and parts of northern China and Russia. Pinus densiflora leaves, pollen, and bark have been widely used for traditional medicine, or edible purposes. However, pine cones contain many bioactive phytochemicals, but they are rarely used as natural raw materials. This study was conducted to evaluated the anti-inflammatory effect of pine cone extracts and its possbility of natural sources were evaluated. Pine cones were extracted with 80% methanol, concentrated and then partitioned with ethyl acetate, and the organic layer was used as a sample. The Pine cone Ethyl acetate Fraction (PEF) showed no toxicity to RAW 264.7 cells at a concentration of less than $50{\mu}g/ml$. PEF inhibited the production of nitric oxide (NO) in RAW 264.7 cells treated with lipopolysaccharide (LPS). Also, It suppressed the expression of cyclooxygenase-2 (COX-2), inducible nitric oxide synthase (iNOS) and transcription of nuclear factor-kappa B (NF-${\kappa}B$). These results suggest that pine cones can be used as an effective natural material for anti-inflammatory agent.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.79-85
• /
• 2022

Tracers are one of the critical factors for improving the performance of velocimetry. Silver and gold nanoparticles as tracers with localized surface-plasmon resonance are analyzed for their scattering properties. The scattering cross sections, angular distribution of the scattering, and equivalent scattering cross sections from 53° and 1.5° half-angle cones at 532 nm are calculated, with particle sizes in the nanoscale range. The 53° and 1.5° half-angle cones used as examples correspond respectively to the collection cones for microscope objectives in microscopic measurements and camera lenses in macroscopic measurements. We find that there is a transitional size near 35 nm when comparing the equivalent scattering cross sections between silver and gold nanoparticles in water at 532 nm. The equivalent scattering cross section of silver nanoparticles is greater or smaller than that of gold nanoparticles when the particle radius is greater or smaller than 35 nm respectively. When the radius of the plasmonic nanoparticles is smaller than about 44 nm, their equivalent scattering cross sections are at least ten times that of TiO₂ nanoparticles. Plasmonic nanoparticles are promising for velocimetry applications.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.133-139
• /
• 2006

The purposes of this study were firstly to identify the microbial species on gutta-percha (GP) cones exposed at outpatient clinics using polymerase chain reaction, and secondly to evaluate the rapid sterilization effect of two chemical disinfectants at chair side. It also evaluated the alteration of surface texture of GP cones after 5-min soaking into two chemical disinfectants. A total of 100 GP cones from two endodontic departments were randomly selected for microbial detection using PCR assay with universal primer. After inoculation on the sterilized GP cones with the same microorganism identified by PCR assay, they were soaked in two chemical disinfectants: 5% NaOCl and 2% chlorhexidine for 1, 3, 5, and 10 minutes. The sterilization effect was evaluated by turbidity and subculture. The change of surface textures using a scanning electron microscope was also examined after 5 min-soaking in two chemical disinfectants. Results showed that four bacterial species were detected in 17 GP cones, and all the species belonged to the genus Staphylococcus. Two chemical disinfectants were effective in sterilization with just 1 minute soaking. On the SEM picture of NaOCl-soaked GP cone, a cluster of cuboidal crystals was seen on the cone surface. Present data demonstrate that two chemical disinfectants are useful for rapid sterilization of GP cone just before obturation at chair side, while CHX-soaked GP cone has cleaner surface without crystal precipitation than that of NaOCl-treated cone.

• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.399-408
• /
• 1991

There are several tuff cones and tuff rings, now only apparent on the western shoreline in Cheju Island. The observation of their landform, bedform, particle size and sorting reveals that these deposits are mainly emplaced by base surges and/or slurries originating from Surtseyan eruption which is attributed to explosive hydrovolcanism influenced by interaction of magma with external water. These are subdivided into two groups based on the plateau basalt. It is recognized that the distal limb of early tuff cones and ring at Dangsanbong, Dansan, Sanbangsan and Hwasun (lower group) are overlain by plateau basalt, on which later tuff rigns at Suwolbong and Songaksan(upper group) further extend the distal limb from each vent. The tuff cones and tuff rings are closely associated with the evidences which shelly fragments are comprised within them, and reworked tuffs, raised beach deposits, Sinyangri formation and littoral cones are deposited around them. The evidences suggest that the Surtseyan eruption resulted from direct or indirect interaction of magma with sea water.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.550-558
• /
• 2007

The purpose of this study was to evaluate the insertion depth of several brands of master gutta percha cones after shaping by various Ni-Ti rotary files in simulated canals. Fifty resin simulated J-shape canals were instrumented with ProFile, ProTaper and HEROShaper. Simulated canals were prepared with ProFile .04 taper #25(n=10), .06 taper #25(n=10), ProTaper F2(n=10), HEROShaper .04 taper #25(n=10) and .06 taper #25(n=10). Size #25 gutta percha cones with a .04 & .06 taper from three different brands were used: DiaDent; META; Sure-endo. The gutta percha cones were selected and inserted into the prepared simulated canals. The distance from the apex of the prepared canal to the gutta percha cone tip was measured by image analysis program. Within limited data of this study, the results were as follows 1. When the simulated root canals were prepared with HEROShaper, gutta-percha cones were closely adapted to the root canal. 2. All brands of gutta percha cones fail to go to the prepared length in canal which was instrumented with ProFile, the cones extend beyond the prepared length in canal which was prepared with ProTaper. 3. In canal which was instrumented with HEROShaper .04 taper #25, Sure-endo .04 taper master gutta percha cone was well fitted(p < 0.05). 4. In canal which was instrumented with HEROShaper .06 taper #25, META .06 taper master gutta percha cone was well fitted(p < 0.05). As a result, we concluded that the insertion depth of all brands of master gutta percha cone do not match the rotary instrument, even though it was prepared by crown-down technique, as recommended by the manufacturer. Therefore, the master cone should be carefully selected to match the depth of the prepared canal for adequate obturation.

• Advances in Computational Design
• /
• v.1 no.4
• /
• pp.345-356
• /
• 2016

Notwithstanding a considerable body of references in the literature on the buckling response of conical shell structures, it seems imperative to provide further insight on the buckling response of locally imperfect steel cones. This paper contains different simulations including non-linear FE analysis and discusses the influence of dent imperfection on the buckling load of these structures subject to external pressure. Data of the present work are evaluated against available experimental results, codes and recommendations and the effect of the local damages is exhaustively set forth. It is also found that the employed FE program can reliably predict the structural response of locally damaged conical shells.