• Title/Summary/Keyword: cones

Search Result 295, Processing Time 0.033 seconds

Andic Properties of Major soils in Cheju Island 1. Characterization of Volcanic Ash Soils by Selective Dissolution Analysis (제주도(濟州島) 대표토양(代表土壤)의 Andic 특성(特性)에 관(關)한 연구(硏究) 1. 선택적(選擇的) 추출방법(抽出方法)에 의(依)한 화산회토(火山灰土)의 특성(特性) 구명(究明))

  • Song, Kwan-Cheol;Yoo, Sun-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.24 no.2
    • /
    • pp.86-94
    • /
    • 1991
  • Volcanic ash soils were classified as Andepts, a suborder of the Inceptisols in Soil Taxonomy. Increased knowledge on the volcanic ash soils necessitated and facilitated considerable improvement in this system. As a result, the new Order of Andisols was incorporated in the 1990 edition of the Keys to Soil Taxonomy. The central concept of an Andisol is that of a soil developing in volcanic ejecta, and/or in volcaniclastic materials, whose colloidal fractions are dominated by short-range-order minerals or Al-humus complexes. Andic propertis of volcanic ash soil in Cheju Island were investigated. For this study, soils of toposequence distributed along the southern slope of Mt. Halla, and the major soil groups such as dark brown soils, very dark brown soils, black soils, and brown forest soils were collected and analyzed for Al, Fe and Si extracted with solutions of pyrophosphate, dithionite-citrate. and oxalate respectively. Weolpyeong and Yongheung soils developed on the lower elevations contain only small amounts of allophane and Al-and Fe-humus complexes. For other soils, allophane content decrease with elevation and increaes with soil depth,whereas Al-humus complexes increase with elevation and decrease with soil depth. Substantial amount of allophane and ferrihydrite are found in all horizons of Ora and Ara soils developed on 150-300m elevations and of Noro and Jeogag soils developed on cinder cones. In the A horizons of Pyeongdae, Tosan and Heugag soils developed on the higher elevations, Al-humus complexes are dominant form of Al reflecting low pH and high organic matter content. However, lower horizons are dominated by allophane.

  • PDF

Plant Species Utilization and Care Patterns Using Potted Plants in the Traditional Gardening (전통조경에서 분(盆)을 이용한 식물의 활용과 애호 행태)

  • Kim, Myung-Hee
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.31 no.3
    • /
    • pp.61-74
    • /
    • 2013
  • This study examined and analyzed ancient writing and poetry regarding cases of appreciating plants by using pots in a garden of a palace or private houses by ancestors, and examined shape and planting method of plant species and potted plants, arrangement and preference of potted plants. As for the method of the study, description research method which examines and interprets poem and painting based on potted plants. The results of this study is summarized like the following. First, the plants which were favorably used for potted plants include 19 kinds such as Prunus mume, Pinus densiflora, Pinus pumila, Phyllostachys spp., Camellia japonica, Punica granatum, and Gardenia jasminoidesa, and as for herbs, 12 kinds such as Chrysanthemum monifolium and Nelumbo nusifera . Second, the species which were specially arranged into artificial shapes include Prunus mume and Pinus densiflora. The two plants made the shape of severe curves of stems such as Wangpi. Gyuban, and Bangan, and there are Pinus densiflora dwarfed potted plant whose roots are stretched on Prunus mume grafted into a strange stump and an oddly shaped stone. For the beauty of the dwarfed tree shape, pine cones are added to an old Pinus densiflora or Parthenocissus tricuspidata is planted to stems, and additional method of making moss on the soil, which is called 'Jongbunchuigyeong'. As for planting method, water culture, planting on a stone, planting on a charcoal, and assembled planting are expressed in poetry. Third, as for external space for potted plants, a place where a king stays, a bed room for a king, surrounding areas and gardens of private houses, and step stones were used as a space which adds artistic effects. Potted plants are placed on a table in a library, on a desk, on a drawer, and near a pillow as a small items in a room, and scholars enjoyed original characteristics and symbolism of the potted plants. Fourth, at the time of flowering of Prunus mume, poetry event was held to enjoy the tree and writing poetry begun. And at the time of flowering of Chrysanthemum monifolium, the flowers were floated in a liquor glass or shadow play was enjoyed. Fifth, potted plants played the role of garden ornaments in elegant events of a palace, the gentry, wedding ceremony, and sacrificial rites. Sixth, potted plants were used as tributes between countries, donation to a king, or a gift of a king. In addition, there were many cases where scholars exchanged potted plants and there is the first record of giving a potted plant in 'Mokeunsigo' by Mokeun Isaek, scholar in the late era of Goryeo. Seventh, at the time of flowering Prunus mume, Chrysanthemum monifolium, Gardenia jasminoides, Nelumbo nusifera, and Narcissustazetta var. chinensis, they enjoyed the particular fragrance and express it into poetry. Eighth, plant species from southern parts such as Camellia japonica, Daphne odora, Gardenia jasminoides, Citrus unshiu, Phyllostachys spp., Punica granatum, Rosa rugosa, and Musa basjoo, or foreign plant species, and species weak against the cold were utilized as pot plants for enjoying green trees indoors in northern central province in harshly cold winter.

Assessment of Topographic Normalization in Jeju Island with Landsat 7 ETM+ and ASTER GDEM Data (Landsat 7 ETM+ 영상과 ASTER GDEM 자료를 이용한 제주도 지역의 지형보정 효과 분석)

  • Hyun, Chang-Uk;Park, Hyeong-Dong
    • Korean Journal of Remote Sensing
    • /
    • v.28 no.4
    • /
    • pp.393-407
    • /
    • 2012
  • This study focuses on the correction of topographic effects caused by a combination of solar elevation and azimuth, and topographic relief in single optical remote sensing imagery, and by a combination of changes in position of the sun and topographic relief in comparative analysis of multi-temporal imageries. For the Jeju Island, Republic of Korea, where Mt. Halla and various cinder cones are located, a Landsat 7 ETM+ imagery and ASTER GDEM data were used to normalize the topographic effects on the imagery, using two topographic normalization methods: cosine correction assuming a Lambertian condition and assuming a non-Lambertian c-correction, with kernel sizes of $3{\times}3$, $5{\times}5$, $7{\times}7$, and $9{\times}9$ pixels. The effects of each correction method and kernel size were then evaluated. The c-correction with a kernel size of $7{\times}7$ produced the best result in the case of a land area with various land-cover types. For a land-cover type of forest extracted from an unsupervised classification result using the ISODATA method, the c-correction with a kernel size of $9{\times}9$ produced the best result, and this topographic normalization for a single land cover type yielded better compensation for topographic effects than in the case of an area with various land-cover types. In applying the relative radiometric normalization to topographically normalized three multi-temporal imageries, more invariant spectral reflectance was obtained for infrared bands and the spectral reflectance patterns were preserved in visible bands, compared with un-normalized imageries. The results show that c-correction considering the remaining reflectance energy from adjacent topography or imperfect atmospheric correction yielded superior normalization results than cosine correction. The normalization results were also improved by increasing the kernel size to compensate for vertical and horizontal errors, and for displacement between satellite imagery and ASTER GDEM.

A Study on Dosimetry for Small Fields of Photon Beam (광자선 소조사면의 선량 측정에 관한 연구)

  • 강위생;하성환;박찬일
    • Progress in Medical Physics
    • /
    • v.5 no.2
    • /
    • pp.57-68
    • /
    • 1994
  • Purpose : The purposes are to discuss the reason to measure dose distributions of circular small fields for stereotactic radiosurgery based on medical linear accelerator, finding of beam axis, and considering points on dosimetry using home-made small water phantom, and to report dosimetric results of 10MV X-ray of Clinac-18, like as TMR, OAR and field size factor required for treatment planning. Method and material : Dose-response linearity and dose-rate dependence of a p-type silicon (Si) diode, of which size and sensitivity are proper for small field dosimetry, are determined by means of measurement. Two water tanks being same in shape and size, with internal dimension, 30${\times}$30${\times}$30cm$^3$ were home-made with acrylic plates and connected by a hose. One of them a used as a water phantom and the other as a device to control depth of the Si detector in the phantom. Two orthogonal dose profiles at a specified depth were used to determine beam axis. TMR's of 4 circular cones, 10, 20, 30 and 40mm at 100cm SAD were measured, and OAR's of them were measured at 4 depths, d$\sub$max/, 6, 10, 15cm at 100cm SCD. Field size factor (FSF) defined by the ratio of D$\sub$max/ of a given cone at SAD to MU were also measured. Result : The dose-response linearity of the Si detector was almost perfect. Its sensitivity decreased with increasing dose rate but stable for high dose rate like as 100MU/min and higher even though dose out of field could be a little bit overestimated because of low dose rate. Method determining beam axis by two orthogonal profiles was simple and gave 0.05mm accuracy. Adjustment of depth of the detector in a water phantom by insertion and remove of some acryl pates under an auxiliary water tank was also simple and accurate. TMR, OAR and FSF measured by Si detector were sufficiently accurate for application to treatment planning of linac-based stereotactic radiosurgery. OAR in field was nearly independent of depth. Conclusion : The Si detector was appropriate for dosimetry of small circular fields for linac-based stereotactic radiosurgery. The beam axis could be determined by two orthogonal dose profiles. The adjustment of depth of the detector in water was possible by addition or removal of some acryl plates under the auxiliary water tank and simple. TMR, OAR and FSF were accurate enough to apply to stereotactic radiosurgery planning. OAR data at one depth are sufficient for radiosurgery planning.

  • PDF

Shallow subsurface structure of the Vulcano-Lipari volcanic complex, Italy, constrained by helicopter-borne aeromagnetic surveys (고해상도 항공자력탐사를 이용한 Italia Vulcano-Lipari 화산 복합체의 천부 지하 구조)

  • Okuma, Shigeo;Nakatsuka, Tadashi;Komazawa, Masao;Sugihara, Mitsuhiko;Nakano, Shun;Furukawa, Ryuta;Supper, Robert
    • Geophysics and Geophysical Exploration
    • /
    • v.9 no.1
    • /
    • pp.129-138
    • /
    • 2006
  • Helicopter-borne aeromagnetic surveys at two different times separated by three years were conducted to better understand the shallow subsurface structure of the Vulcano and Lipari volcanic complex, Aeolian Islands, southern Italy, and also to monitor the volcanic activity of the area. As there was no meaningful difference between the two magnetic datasets to imply an apparent change of the volcanic activity, the datasets were merged to produce an aeromagnetic map with wider coverage than was given by a single dataset. Apparent magnetisation intensity mapping was applied to terrain-corrected magnetic anomalies, and showed local magnetisation highs in and around Fossa Cone, suggesting heterogeneity of the cone. Magnetic modelling was conducted for three of those magnetisation highs. Each model implied the presence of concealed volcanic products overlain by pyroclastic rocks from the Fossa crater. The model for the Fossa crater area suggests a buried trachytic lava flow on the southern edge of the present crater. The magnetic model at Forgia Vecchia suggests that phreatic cones can be interpreted as resulting from a concealed eruptive centre, with thick latitic lavas that fill up Fossa Caldera. However, the distribution of lavas seems to be limited to a smaller area than was expected from drilling results. This can be explained partly by alteration of the lavas by intense hydrothermal activity, as seen at geothermal areas close to Porto Levante. The magnetic model at the north-eastern Fossa Cone implies that thick lavas accumulated as another eruption centre in the early stage of the activity of Fossa. Recent geoelectric surveys showed high-resistivity zones in the areas of the last two magnetic models.

The Variation of Natural Populations of Pinus densiflora S. et Z. in Kangwondo - The Morphological Characteristics of Needle and Cone - (강원도 지역 소나무 천연집단의 변이에 관한 연구 - 침엽과 구과의 형태적 특성을 중심으로 -)

  • Yi, Jae-Seon;Song, Jeong-Ho;Han, Sang-Sup;Park, Wan-Geun
    • Journal of Forest and Environmental Science
    • /
    • v.15 no.1
    • /
    • pp.107-116
    • /
    • 1999
  • For the study on the variation of Pinus densiflora S. et Z. natural populations. 13 stands were selected in Kangwondo region in 1994. They were located in Hyoja-Dong, Chunchon-Si [plot 1]; Sinnam-Myun, lnje-Gun [plot 2]; Buk-Myun, lnje-Gun [plot 3]; Seo-Myun, Yangyang-Gun [plot 4 and 5]; Sonyang-Myun, Yangyang-Gun [plot 6]; Toseong-Myun, Goseong-Gun [plot 7]; Synrim-Myun, Wonju-Si [plot 8]; Dunnae-Myun, Hoengsong-Gun [plot 9]; Jinbu-Myun, Pyungchang-Gun [plot 10]; Sogumgang, Kangneung-Si [plot 11]; Seo-Myun, Ulchin-Gun [plot 12]; and Mitan- Myun, Pyungchang-Gun [plot 13]. The morphological characteristics of needles and cones were investigated for twenty individual trees from each population. The results are summarized as follows: 1. Among needle characteristics, length, the number of serration. and the number of stoma row were significantly different among populations and between individuals within a population. They were 69.3~91.9mm, 25.1~28.7 per 0.5cm, and 4.1~6.2 rows for abaxial side and 2.9~4.6 rows for adaxial side, respectively. 2. Among cone characters surveyed. length and diameter were significantly different among populations and between individuals within a population. They were 31.1~43.7mm and 20.0~24.1mm, respectively. 3. A highly positive correlation was observed between the number of stoma row of abaxial side and that of adaxial side. and between length and diameter of cone. But the number of serration was negatively correlated with all traits. 4. The distance from seashore was positively correlated with needle length and the number of serration, but negatively correlated with the number of stoma row and cone length. However, the altitude was positively correlated with the number of serration, but negatively correlated with the number of stoma row and cone length. 5. Cluster analysis using average linkage method for needle and cone characteristics showed two groups to Euclidean distance 1.0. They were group I consisting of plots 1, 8, 12, and 13 and group II of plots 2, 3, 4, 5, 6, 7, 9, 10, and 11. However, group II was divided again to Euclidean distance 0.8, that is a group including plots 2, 3, 9, and 11 and the other group comprising plots 4, 5, 6, 7, and 10.

  • PDF

Effect of Nitrogen Application on the Yield and Quality of Hop(Humulus lupus L.) (질소(窒素) 시용량(施用量)이 호프(Humulus lupulus L.)의 수량(收量) 및 품질(品質)에 미치는 영향(影響))

  • Lee, Yong-Hwan;Cho, Byong-Ok;Huh, Beom-Lyang;Ho, Que-Soon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.25 no.1
    • /
    • pp.38-43
    • /
    • 1992
  • A field experiment was conducted to find out the effect level of nitrogen fertilization on the yield and quality of hop (Hallertau variety) emphasis given to ${\alpha}$-acid content. Nitrogen was applied by the rates of 0, 12, 18, 24, 30 and 36kg per 10a. Results were summarized as follows. 1. Stages of cone-hair developing and coneripening were delayed with increment of nitrogen applied. Number of nodes and length of vine increased with nitrogen applid by up to 24kg N/10a. 2. Yield was the highest in the 24kg N/10a plot and cone weight had high significant correlations with yield without regard to the years of growth. No.of flower per side blanch and weight of 100 cones had a significant correlation with yield in the four-year old and five-year old Hop plants. 3. Nutrient content in Hop plants was in the order of CaO, total nitrogen, $K_2O$, MgO and $P_2O_5$. Content of total nitrogen, CaO and MgO was high in leaves while that of $P_2O_5$ and $K_2O$ was high in cone. Nitrogen, phosphorus and magnesium increased with increment of nitrogen fetilized while potassium and calcium decreased. 4. As for the distribution of nutrients in cone developing stage $SiO_2$ content was higher in lower part than in the upper part while $P_2O_5$ contetn was higher in upper part than in lower part of the plant. And content of nitrogen and potassium was higher in middle height than in upper and lower part. 5. The optimum levels of nitrogen application were 19.3kg for 2 years, 24.3kg for 3-year, 27.9kg for 4 years and 31.8kg/10a for 5-year old Hop, respectively. 6. Nitrogen uptake in cone showed a positive correlation with the content of ${\alpha}$-acid and ${\beta}$-acid in cone.

  • PDF

Beam Shaping by Independent Jaw Closure in Steveotactic Radiotherapy (정위방사선치료 시 독립턱 부분폐쇄를 이용하는 선량분포개선 방법)

  • Ahn Yong Chan;Cho Byung Chul;Choi Dong Rock;Kim Dae Yong;Huh Seung Jae;Oh Do Hoon;Bae Hoonsik;Yeo In Hwan;Ko Young Eun
    • Radiation Oncology Journal
    • /
    • v.18 no.2
    • /
    • pp.150-156
    • /
    • 2000
  • Purpose : Stereotactic radiation therapy (SRT) can deliver highly focused radiation to a small and spherical target lesion with very high degree of mechanical accuracy. For non-spherical and large lesions, however, inclusion of the neighboring normal structures within the high dose radiation volume is inevitable in SRT This is to report the beam shaping using the partial closure of the independent jaw in SRT and the verification of dose calculation and the dose display using a home-made soft ware. Materials and Methods : Authors adopted the idea to partially close one or more independent collimator jaw(5) in addition to the circular collimator cones to shield the neighboring normal structures while keeping the target lesion within the radiation beam field at all angles along the arc trajectory. The output factors (OF's) and the tissue-maximum ratios (TMR's) were measured using the micro ion chamber in the water phantom dosimetry system, and were compared with the theoretical calculations. A film dosimetry procedure was peformed to obtain the depth dose profiles at 5 cm, and they were also compared with the theoretical calculations, where the radiation dose would depend on the actual area of irradiation. Authors incorporated this algorithm into the home-made SRT software for the isodose calculation and display, and was tried on an example case with single brain metastasis. The dose-volume histograms (DVH's) of the planning target volume (PTV) and the normal brain derived by the control plan were reciprocally compared with those derived by the plan using the same arc arrangement plus the independent collimator jaw closure. Results : When using 5.0 cm diameter collimator, the measurements of the OF's and the TMR's with one independent jaw set at 30 mm (unblocked), 15.5 mm, 8.6 mm, and 0 mm from th central beam axis showed good correlation to the theoretical calculation within 0.5% and 0.3% error range. The dose profiles at 5 cm depth obtained by the film dosimetry also showed very good correlation to the theoretical calculations. The isodose profiles obtained on the home-made software demonstrated a slightly more conformal dose distribution around the target lesion by using the independent jaw closure, where the DVH's of the PTV were almost equivalent on the two plans, while the DVH's for the normal brain showed that less volume of the normal brain receiving high radiation dose by using this modification than the control plan employing the circular collimator cone only. Conclusions : With the beam shaping modification using the independent jaw closure, authors have realized wider clinical application of SRT with more conformal dose planning. Authors believe that SRT, with beam shaping ideas and efforts, should no longer be limited to the small spherical lesions, but be more widely applied to rather irregularly shaped tumors in the intracranial and the head and neck regions.

  • PDF

Measurement of Soil Hardness for Puddling Soil for Mechanical Rice Transplantation (기계이앙(機械移秧) 준비답(準備畓)의 토양경도(土壤硬度) 측정(測定)에 관(關)한 연구(硏究))

  • Kim, Hong Yun;Kim, Soung Rai;Kim, Ki Dae
    • Korean Journal of Agricultural Science
    • /
    • v.13 no.2
    • /
    • pp.243-254
    • /
    • 1986
  • This study was conducted to select the appropriate types of drop cone for measuring soil hardness and to determine the cone index for the actual field on which rice will be transplanted. One type of drop cone was selected from the results of indoor tests and the selected drop cone was tested at the 56fields of the five different districts in Korea. The results of this study were summarized as follows; 1. Cone type D shows a significant penetrating depth variation comparing the other types of cone on the indoor tests. 2. Six types of cone were tested on the similar state of the actual puddling field. The penetrating depth variation was not significant among the cones but cone type F seemed to be suitable to evaluate the state of puddling because cone type F showed the least repeat variations during the tests. 3. The actual field test from 56 fields showed that the penetrating depth was approximately 11.0-14.4cm on the puddling day and it was 9.2-13.7cm on the transplanting day of which one to three days after puddling. 4. The above results show that the selected drop cone could be used to formulate the state of puddling.

  • PDF

Obturation efficiency of non-standardized gutta-percha cone in curved root canals prepared with 0.06 taper nickel-titanium instruments (0.06-경사도의 니켈-티타늄 기구로 형성된 레진 만곡근관에서 비표준화 GUTTA-PERCHA CONE의 근관충전 효율)

  • Lee, Eun-Ah;Kim, Sung-Kyo
    • Restorative Dentistry and Endodontics
    • /
    • v.30 no.2
    • /
    • pp.79-85
    • /
    • 2005
  • The purpose of this study was to evaluate the obturation efficiency of a non-standardized gutta-percha cone in curved root canals prepared with 0.06 taper nickel-titanium instruments. Sixty simulated curved root canals in clear resin blocks were prepared with crown-down technique using 0.06 taper rotary $ProTaper^{TM}$and ProFile (Dentsply-Maillefer) until apical canal was size 30. Root canals were randomly divided into 4 groups of 15 blocks and obturated with cold-laterally compacted gutta-percha technique by using either a non-standardized size medium gutta-percha cone or an ISO-standardized size 30 one as a master cone. Gutta-percha area ratio were calculated at apical levels of 1, 3 and 5 mm using AutoCAD 2000 after cross-sectioning, and the data were analyzed with one-way and two-way ANOVAs and Duncan's multiple range test. Non-standardized size medium cone groups showed significantly higher gutta-percha area ratio than standardized cone groups at all apical levels (p < 0.01). Non-standardized cone groups used significantly less accessory cones than standardized cone groups (p < 0.01).