• 한국지반공학회지:지반
• /
• 제11권3호
• /
• pp.139-162
• /
• 1995

WIPP에서 가스로 인한 파괴의 가능성을 해석적 계산과 수치해석 및 실내실첩을 통하여 연구하였다. 우선 본 연구와 관련된 화학반응식을 조사한 결과, 폐기물 내의 철이 산화하면서 다량의 가스가 발생될 수 있음을 알았다. 또한 간단한 지하수 흐름의 계산결과, 투수성이 높은 파쇄영역이 존재하지 않는 경우 이 가스량은 암염 내부와 약한 수평면에 인장균열을 초래하기에 충분히 높은 압력을 야기시킬 것이다. 해석적 계산은 선형탄성파괴역학의 개념을 사용하여 수행하였고, 수치해석은 유한요소법을 사용하여 행하였다. 또한 실내실험은 발생가능한 파괴 메카니즘을 설명하기 위하여 행하였다. 해석결과 약한 경석고층에서 수평으로 균열이 증가된 뒤에 그 균열은 이 층을 뜰고나가 암염 위쪽으로 계속 전폭되어 지표면 쪽의 수평방향과 53$^{\circ}$경사각을 갖고 지표면에 도달된다. 이와 같은 후자의 현상을 방지하기 위하여 경석고는 암염의 인성보다 0.5590배가 적은 파괴인성을 가져야 하는 것으로 나타났다. 실험결과 세 가지 형태의 균열(radial vertical cracks, horizontal circular cracks and cone -shaped cracks)이 관찰되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.127-130
• /
• 2004

For the quality control of the industrial products, an automatic hole measuring system has been developed. The measurement device allows X-Y movement due to contact forces between a hole and its own circular cone and the device is attached to an industrial robot. Its measurement accuracy is about 0.04mm. This movement of the plate is measured by two LVDT sensor system. But this system using the LVDT sensors is restricted by high cost and precision of measurement and correspondence of environment so particularly, a vision system with CCD-Camera is discussed in this paper for the above mentioned purpose. The device consists of two of two links jointed with hinge pins basically and, they guarantee free movement of the touch prove attached on the second link in the same plane. These links are returned to home position by the spring plungers automatically after each process for the next one. On the surface of the touch prove, it has a circular white mark for camera recognition. The system detect and notify the center coordinate of capture mark image through the image processing. Its measuring accuracy has been proved to be about $\pm$0.01mm through the repeated implementation over 200 times. This technique will shows the advantage of touch-indirect image capture idea using cone-shaped touch prove in various symmetrical shaped holes particulary, like tapped holes, chamfered holes, etc As a result, we attained our object in a view of the accuracy, economical efficiency, and functionality

• 복식
• /
• 제23권
• /
• pp.151-168
• /
• 1994

The purpose of this study is to examine all kinds of Kwanmo of Kokuryo. The results are as follows . There are nine kinds of Kwanmo in Kokuryo : Kun(건), Chaik ( 책), Jeolpoong(절풍), Sogol (소골), Jowookwan (조익관), Rakwan (라관), Kagkwan(각관), Rip(립) and Jumdongkwan (금동관), Kun(건) is a piece of cloth which covers hair. There are two types of kun(건) : Hari band type and entire head cover type. Chaik(책) was originated in China , but people of Kokuryo didn't wore chinese Chaik (책) as it was. They created unique shape of their own. Jeolpoong (절풍) is the cone-shaped knwanmo which is chiefly made of leather. In the early period it was worn by the nobility , but gradually trickcled down common people's Kwanmo. Sogol(소골) is the cone -shaped Kwanmo which is made of silk and decorated with gold and silver. Only the nobility wore it, Jowookwan(조익관) is the knwanmo decorated with natural bird feather or metallic feather. Mainly it was worn by the nobility in hunting , Besides, worriors, diplomats, dancers and musicians wore it. Rakwan (나관) was worn by the highest class. There were three kinds of Rakwan (나관) : Baekrakwan(백나관). Cheongrakwan (청나관) and Birakwan (비나관). The king of Kokuryo wore BAekrakwan (백나관). It was simlar ini shape to chines Mookwan (무관). Kagkwan (각관) was the kwanmo unique to Kokuryo. It was used by the nobility . Rip (립)was originated on purpose to protect people form the sunshine or rain. There were two kinds of Rip(립) ; Bangrip (방립) and Pyungyangja(평량자). The former was used by the nobility, the lattr was used by common people in hunting . The Kwanmo which was decorated with gold and silver developed into Kumdongkwan(금동관). The Kwanmo which is similar to Kumkwan (금관) of Baekje and Shilla has been shown in Kaimachong (가마총) 무 dJumdongkwan(금동관) was excavated in the ancient tombs of Kokuryo.

• Imaging Science in Dentistry
• /
• 제44권4호
• /
• pp.273-278
• /
• 2014

Purpose: This study was performed to investigate the course of the mandibular canal on panoramic radiography and the visibility of this canal on both panoramic radiography and cone-beam computed tomography (CBCT). Materials and Methods: The study consisted of panoramic radiographs and CBCT images from 262 patients. The course of the mandibular canal, as seen in panoramic radiographs, was classified into four types: linear, elliptical, spoon-shaped, and turning curves. The visibility of this canal from the first to the third molar region was evaluated by visually determining whether the mandibular canal was clearly visible, probably visible, or invisible. The visibihlity of the canal on panoramic radiographs was compared with that on CBCT images. Results: Elliptical curves were most frequently observed along the course of the mandibular canal. The percentage of clearly visible mandibular canals was the highest among the spoon-shaped curves and the lowest among the linear curves. On panoramic radiographs, invisible mandibular canals were found in 22.7% of the examined sites in the first molar region, 11.8% in the second molar region, and 1.3% in the third molar region. On CBCT cross-sectional images, the mandibular canal was invisible in 8.2% of the examined sites in the first molar region, 5.7% in the second molar region, and 0.2% in the third molar region. Conclusion: The visibility of this canal was lower in the first molar region than in the third molar region. The mandibular canal presented better visibility on CBCT images than on panoramic radiographs.

• 한국광학회지
• /
• 제25권4호
• /
• pp.200-206
• /
• 2014

본 논문에서는 직경 $125{\mu}m$의 싱글모드 광섬유에 입사된 빔을 다방향으로 방사하기 위하여 이론적으로 계산된 값을 광학설계 프로그램인 LightTools를 이용하여 광섬유 끝단에 원뿔형 구조물을 모델링 하고 입사된 모든 빔이 전반사 되어 측면으로 방사되는 광섬유 팁과, 전방과 측면으로 동시에 방사가 가능한 광섬유 팁에 대해 시뮬레이션을 하였다. 이러한 결과를 가지고 광섬유 끝단에 펨토초 레이저와 $CO_2$ 레이저를 이용하여 원뿔형 구조물을 제작하고 시뮬레이션 결과와 비교 분석하는 연구를 수행하였다.

• Restorative Dentistry and Endodontics
• /
• 제49권1호
• /
• pp.2.1-2.12
• /
• 2024

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.411-420
• /
• 2002

The aim of this study is to compare the adaptability of thermoplasticized injectable gutta-percha technique to the canal walls in ribbon-shaped canals. Thirty resin models simulated ribbon-shape canals were instrumented to #40 using .06 taper Profile systems. Three groups of each 10 resin models were obturated by the lateral condensation technique(LC) and the two thermoplasticized injectable gutta-percha technique; Ultrafil Endoset+Obtura II(EO) and Ultrafil Firmset(UF), respectively. After resin model were kept at room temperature for 4 days, they were resected horizontally with micro-tome at 1, 2, 3, 4 and 5mm levels from apex. At each levels. image of resected surface were taken using CCD camera under a stereomicroscope at $\times$40 magnification and stored. Ratio of the area of gutta-percha was obtained by calculating area of gutta-percha cone to the total area of canal using digitized image-ana-Iyzing program. The data were collected then analyzed statistically using One-way ANOVA. The results were as follows. 1 At 1mm levels, there was no statistically significant difference in the mean ratio of gutta-percha among the groups. 2. At 2mm level, EO showed the highest mean ratio of gutta-percha (p<0.05) and there was no significant difference between LC and UF. 3. At 3, 4, 5mm levels, EO and UF had significantly greater mean ratio of gutta-percha than LC(p<0.05) and there was no significant difference between EO and UF. In conclusion, the thermoplasticized injectable gutta-percha techniques demonstrated relatively favorable adaptability to canal walls than lateral condensation technique in ribbon-shaped canals except for 1mm level.

• 한국레이저가공학회지
• /
• 제18권3호
• /
• pp.14-19
• /
• 2015

A helical fabricating method using $CO_2$ laser was utilized for producing cone-shaped structure on a silica substrate. Output power and the number of scanning radiation were modified in order to control the structure. The experiment shows that the depth and width of cone-shape were increased with higher output power of the laser and the number of scanning. We demonstrate fabrication of multidirectional side-firing optical fiber with diameter of 440 um using the $CO_2$ laser fabrication technique.

• Imaging Science in Dentistry
• /
• 제42권4호
• /
• pp.249-253
• /
• 2012

Purpose: Diagnosis of osteoarthritis most commonly depends on clinical and radiographic findings. The present study attempted to observe the bony changes in temporomandibular joint (TMJ) patients from all age groups. Materials and Methods: The first-visit clinical records and cone beam computed tomography (CBCT) data of 440 TMJs from 220 consecutive TMJ patients were reviewed retrospectively. Results: The most frequent condylar bony change observed was sclerosis (133 joints, 30.2%) followed by surface erosion (129 joints, 29.3%), flattening of the articular surface (112 joints, 25.5%), and deviation in form (58 joints, 13.2%), which included 33 TMJs in a cane-shape, 16 with a lateral or medial pole depression, 6 with posterior condylar surface flattening, and 3 with a bifid-shaped condyle. Fifty-three joints (12.0%) showed hypoplastic condyles but only 1 joint showed hyperplasia. Osteophyte was found in 35 joints (8.0%) and subcortical cyst in 24 joints (5.5%), 5 of which had surface erosion as well. One hundred nineteen joints (27.0%) had only one kind of condylar bony change, 66 joints (15.0%) had two, 52 joints (11.8%) had three, 12 joints (5.0%) had four, and 6 joints (1.4%) had five kinds of condylar bony changes at the same time. Eighty-five (65.9%) of 129 joints with surface erosion had pain recorded at the chief complaint. Conclusion: With more widespread use of CBCT, more specific or detailed guidelines for osteoarthritis are needed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.171-171
• /
• 2012

In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.