• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1993

In the fall of 1992, growth characteristics and cone-bearing behaviour of crown top shoots were investigated on Pin us koraiensis trees, belonging to age class VII and IV, in the School Forests, College of Forestry, Kangwon National University to obtain basic information for the design of Korean pine cone harvesting machine. The results were summarized as follows. 1. The length of terminal main shoots and lateral shoots of the trees in age class IV was 27~56cm and 18~47cm, respectively, both of which were significantly higher than those of the trees in age class VII. 2. There was no significant difference between two age classes in the branching angle ($24{\sim}89^{\circ}$) of lateral shoots and in the diameter (10~30mm) of two-year-old main shoots. However, one-year-old terminal main shoots of age class IV showed the higher diameter (9~18mm) than those of age class VII. 3. Mean cone number per tree was 5, and mean fresh weight of cone was 272g. No significant difference was found in these traits between both age classes. 4. Cones, on an average, hung on the two-year-old main shoots 15cm above the basal ends in age class VII and 33cm above in age class IV. Both lengths are equivalent to one half and four fifths of the shoots, respectively. 5. The fresh weight range of crown-top shoots containing cones was 1.0~7.4kg.