• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.113-120
• /
• 2022

Information technologies in higher education are the basis for solving the tasks set by monitoring the quality of higher education. The directions of aplying information technologies which are used the most nowadays have been listed. The issues that should be addressed by monitoring the quality of higher education with the use of information technology have been listed. The functional basis for building a monitoring system is the cyclical stages: Observation; Orientation; Decision; Action. The monitoring system's considered cyclicity ensures that the concept of independent functioning of the monitoring system's subsystems is implemented.. It also ensures real-time task execution and information availability for all levels of the system's hierarchy of vertical and horizontal links, with the ability to restrict access. The educational branch uses information and computer technologies to monitor research results, which are realized in: scientific, reference, and educational output; electronic resources; state standards of education; analytical materials; materials for state reports; expert inferences on current issues of education and science; normative legal documents; state and sectoral programs; conference recommendations; informational, bibliographic, abstract, review publications; digests. The quality of Ukrainian scientists' scientific work is measured using a variety of bibliographic markers. The most common is the citation index. In order to carry out high-quality systematization of information and computer monitoring technologies, the classification has been carried out on the basis of certain features: (processual support for implementation by publishing, distributing and using the results of research work). The advantages and disadvantages of using web-based resources and services as information technology tools have been discussed. A set of indicators disclosed in the article evaluates the effectiveness of any means or method of observation and control over the object of monitoring. The use of information technology for monitoring and evaluating higher education is feasible and widespread in Ukrainian education, and it encourages the adoption of e-learning. The functional elements that stand out in the information-analytical monitoring system have been disclosed.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.118-125
• /
• 2016

The purpose of this study is to identify issues for an effective safety culture assessment by conducting a case study of an electronics manufacturing plant in Korea. Cooper's safety culture model was used as the assessment method, and Fleming and Hudson's safety culture maturity models were applied as assessment criteria. The results of the safety culture assessment showed that there needs to be a design optimized for study purposes. For example, the correlation between the questionnaire survey and in-depth interview needs to be analyzed. The result of the behavior monitoring should show the relationships with other dimensions. A safety culture maturity model has to be developed to customize the study factors and questions.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.143-151
• /
• 2011

Reviews indicated that supervisory feedback provided to workers is the most effective intervention to change performance in organizational settings. However, supervisors themselves hardly receive feedback on their own behaviors. This study implemented self-management technique to improve supervisory behaviors at a construction site. Self-management in the current study consisted of goal setting, self-monitoring and providing reinforcers for two supervisory behaviors; (1) conducting safety observations and (2) interacting with workers for safety improvement. Two supervisors severed as participants. An AB within-group design was adopted. After baseline (A), self-management technique was implemented (B). Results suggested that self-management was effective in increasing the two supervisory behaviors. Moreover, the increased supervisory behaviors were associated with improvement in workers' safety performance.

• Smart Structures and Systems
• /
• v.18 no.3
• /
• pp.585-599
• /
• 2016

Steel cables serve as the key structural components in long-span bridges, and the force state of the steel cable is deemed to be one of the most important determinant factors representing the safety condition of bridge structures. The disadvantages of traditional cable force measurement methods have been envisaged and development of an effective alternative is still desired. In the last decade, the vision-based sensing technology has been rapidly developed and broadly applied in the field of structural health monitoring (SHM). With the aid of vision-based multi-point structural displacement measurement method, monitoring of the tensile force of the steel cable can be realized. In this paper, a novel cable force monitoring system integrated with a multi-point pattern matching algorithm is developed. The feasibility and accuracy of the developed vision-based force monitoring system has been validated by conducting the uniaxial tensile tests of steel bars, steel wire ropes, and parallel strand cables on a universal testing machine (UTM) as well as a series of moving loading experiments on a scale arch bridge model. The comparative study of the experimental outcomes indicates that the results obtained by the vision-based system are consistent with those measured by the traditional method for cable force measurement.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.151-159
• /
• 2012

This study implemented self-management technique to improve supervisory behaviors at a construction site. Self-management in the current study consisted of goal setting, self-monitoring and providing reward for two supervisory behaviors; (1) conducting safety observations of workers safety behavior and (2) providing safe related feedback. Two supervisors severed as participants. An AB within-group design was adopted. After baseline(A), self-management technique was implemented(B). Results suggested that self-management was effective in increasing the two supervisory behaviors. Moreover, the increased supervisory behaviors were associated with improvement in workers' safety performance.

• Structural Monitoring and Maintenance
• /
• v.10 no.2
• /
• pp.133-154
• /
• 2023

Obscured structural members are mostly under-evaluated during condition assessment due to lack of visual inspection capability. Insufficient information about the integrity of these structural members poses a significant risk for public safety. Time domain reflectometry (TDR) is a novel approach in structural health monitoring (SHM). Ordinary coaxial cables "as is" without a major modification are not suitable for SHM with TDR. The objective of this study is to propose a practical and cost-effective modification approach to commercially available coaxial cables in order to use them as a "cable sensor" for damage detection with the TDR equipment for obscured structural members. The experimental validation and assessment of the proposed modification approach was achieved by conducting 3-point bending tests of the model piles as a representative obscured structural member. It can be noted that the RG59/U-6 and RG6/U-4 cable sensors expose higher strain sensitivity in comparison with non-modified "as is" versions of the cables used. As a result, the cable sensors have the capability of sensing both the presence and the location of a structural damage with a maximum aberration of 3 cm. Furthermore, the crack development can be monitored by the RG59/U-6 cable sensor with a simple calibration.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.40-46
• /
• 2011

The purpose of CBA(cost-benefit analysis) in risk assessment is to show whether the benefits of implementing additional risk reduction methods(RRMs) derived through risk assessment outweigh its costs and it is proper to implement the methods. In this paper CBA has been conducted in order to select the most effective and reasonable RRM as implementing the RRM derived after QRA for the high pressure urban gas pipelines. As conducting QRA again by applying the derived RRMs, No. 10 measure which includes pipeline corrosion monitoring, MOV(motor operated valve) installation and the method to protect pipeline damage caused by third-party mechanical interference has showed the highest risk reduction effect. Also it has been considered to be reasonably practicable by conducting CBA and then is selected as the most effective and reasonable RRM on the objects of this paper.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.10
• /
• pp.83-90
• /
• 2019

The purpose of the present study is to confirm, through quantitative indices, changes arising with the implementation of urban regeneration projects, with a specific focus on the case of Dongnam-gu, Cheonan, one of the 13 priority rgions in urban regeneration. By utilizing quantitative data including resident population, floating population, revenue, number of small business persons, number of startup companies, and number of licensed buildings, the study confirmed changes in Dongnam-gu and other urban regeneration areas. The study compared monitoring results and implemented project policies to confirm changes within the area as a result of project implementation. Additionally, resident perception toward business districts was surveyed to confirm changes in perception and opinion, and monitoring indices were used to confirm changes as a result of project implementation. Accordingly, the study presented a plan to carry out the assessment of urban regeneration projects, which can be employed as data for conducting future urban regeneration projects. Urban regeneration projects are carried out for the long-term. Therefore, based on monitoring and investigative data, they require constant policy suggestions and periodic monitoring in accordance with changes resulting from project implementation. With regards to the effective range of urban regeneration projects, the study confirmed the possibility of an effect not only in the area of project implementation but also in surrounding areas. However, because the study merely confirms changes in Dongnam-gu, Cheonan, additional research is necessary to ascertain assessment plans suitable to the different types and regional characteristics of urban regeneration projects.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.58-58
• /
• 2022

With the development of advanced technology, automation of agricultural work is spreading. In association with the 4th industrial revolution-based technology, research on field smart farm technology is being actively conducted. A state-of-the-art unmanned automated agricultural production demonstration complex was established in Naju-si, Jeollanam-do. For the operation of the demonstration area platform, it is necessary to build a sophisticated, advanced, and intelligent field smart farming model. For the operation of the unmanned automated agricultural production demonstration area platform, we are building data on the growth of soybean for smart cultivated crops and conducting research to determine the optimal time for agricultural work. In order to operate an unmanned automation platform, data is collected to discover digital factors for water management immediately after planting, water management during the growing season, and determination of harvest time. A subsurface drip irrigation system was established for smart water management. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. Vegetation indices were collected using drones to find key factors in soybean production prediction. In addition, major growth characteristics such as stem length, number of branches, number of nodes on the main stem, leaf area index, and dry weight were investigated. By discovering digital factors for effective decision-making through data construction, it is expected to greatly enhance the efficiency of the operation of the unmanned automated agricultural production demonstration area.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.246-258
• /
• 2024

In aerospace and energy engineering, the reconstruction of three-dimensional (3D) temperature distributions is crucial. Traditional methods like algebraic iterative reconstruction and filtered back-projection depend on voxel division for resolution. Our algorithm, blending deep learning with computer graphics rendering, converts 2D projections into light rays for uniform sampling, using a fully connected neural network to depict the 3D temperature field. Although effective in capturing internal details, it demands multiple cameras for varied angle projections, increasing cost and computational needs. We assess the impact of camera number on reconstruction accuracy and efficiency, conducting butane-flame simulations with different camera setups (6 to 18 cameras). The results show improved accuracy with more cameras, with 12 cameras achieving optimal computational efficiency (1.263) and low error rates. Verification experiments with 9, 12, and 15 cameras, using thermocouples, confirm that the 12-camera setup as the best, balancing efficiency and accuracy. This offers a feasible, cost-effective solution for real-world applications like engine testing and environmental monitoring, improving accuracy and resource management in temperature measurement.