• 제목/요약/키워드: conditioning treatment

검색결과 238건 처리시간 0.027초

토양입단(土壤粒團)의 안정성(安定性)과 친수성(親水性)이 수분침투(水分浸透) 및 증발(蒸發)에 미치는 영향(影響) (Effects of Soil Aggregate Stability and Wettability on Infiltration and Evaporation)

  • 조인상;조성진
    • 한국토양비료학회지
    • /
    • 제18권2호
    • /
    • pp.121-127
    • /
    • 1985
  • 토양수분(土壤水分)을 효율적(效率的)으로 관리(管理)할 수 있는 토양개량방법(土壤改良方法)을 구명(究明)하고 토양입단(土壤粒團)의 특성(特性)이 수분변화(水分變化)에 미치는 영향(影響)을 파악(把握)하여 토양구조개선(土壤構造改善)에 적정기준(適正基準)을 제시(提示)하기 위(爲)하여 사양토(砂壤土)와 식양토(埴壤土)에 친수성(親水性)인 Uresol과 소수성(疎水性)인 Bitumen을 처리(處理)하여 시험(試驗)을 실시(實施)하였다. Perspex관(管)을 세토(細土)로 채우고 개량제(改良劑)를 처리(處理)한 토양입단(土壤粒團)과 처리(處理)하지 않은 토양(土壤)을 2cm 두께로 복토(覆土)한 후(後), 인공강우하(人工降雨下)에서 수분(水分)의 침투량(浸透量)을 측정(測定)하고 인공기상조건(人工氣象條件)에서 r-선(線) 수분측정기(水分測定機)를 이용(利用)하여 수분(水分)의 증발량(蒸發量)을 조사(調査)하였다. 토양(土壤)의 수분침투량(水分浸透量)은 친수성(親水性) 토양개량제(土壤改良劑) Uresol 처리(處理)에 의하여 18.7~50.8% 증대(增大)되었으며 소수성(疎水性) Bitumen 처리(處理)는 25% 이하(以下)로 감소(減少)되었다. 증발량(蒸發量)은 Bitumen 처리(處理)로 22.0~68.1%로 억제(抑制)되었으며 Uresol 처리(處理)도 38.7~68.4%로 감소(減少)되었다. 수분침투(水分浸透)와 증발(蒸發)을 합(合)한 총수분이용율(總水分利用率)은 Uresol 처리(處理)에 의하여 2배(倍) 이상(以上) 높일 수 있었다. 토양입단(土壤粒團)의 안정성(安定性), 습윤각(濕潤角)등은 수분(水分)의 침투(浸透)와 증발(蒸發)에 영향(影響)을 끼쳤으며 특(特)히 수분침투(水分浸透)와 습윤각(濕潤角)-안정지수(安定指數), 수분증발(水分蒸發)과 습윤각(濕潤角)-불안정지수(不安定指數)와는 고도(高度)의 유의성(有意性)있는 대수함수적(對數函數的)인 정(正)의 상관(相關)이 있었다. 토양입단(土壤粒團)의 안정성(安定性)은 수분(水分)의 침투(浸透) 및 증발억제(蒸發抑制)와 정상관(正相關)이 있으나 습윤각(濕潤角)의 개선(改善)은 수분침투(水分浸透)와 증발(蒸發)을 모두 증대(增大)시키는 요인(要因)이 되므로 전체적(全體的)인 수분관리면(水分管理面)에서는 토양입단(土壤粒團)의 안정성(安定性)을 증대(增大) 시키는 것이 효율적(效率的)인 것으로 판단(判斷)되었다.

  • PDF

토양세척 후의 유류 오염 Silty Clay 처리를 위한 유사펜톤 산화반응 (Fenton-like Reaction for Treatment of Petroleum-Contaminated Silty Clay after Soil Washing Process)

  • 소명호;하지연;유재봉;김창균
    • 대한환경공학회지
    • /
    • 제31권1호
    • /
    • pp.1-8
    • /
    • 2009
  • 토양 세척 공정에서 최종적으로 발생되는 잔류 유류 오염원 함유 미세토(silty clay)의 효율적인 처리 방법을 도출하고자 본 연구를 수행하였다. 본 연구에서는 토양 중에 존재하는 철 성분을 이용한 유사펜톤 산화반응 공정의 적용 가능성 평가 및 반응 종결 후의 미세토에 대한 생분해도를 평가하여 유사펜턴 산화 후 생성된 분해산물의 생물학적 연계 처리 가능성을 파악하고자 하였다. 먼저 세척장에서 탈수된 케익 상태의 시료(고분자응집제 처리)와 침전조에서 고분자응집제를 투여하기 이전 상태의 미세토 슬러지 시료를 대상으로 과산화수소($H_2O_2$)를 다양한 농도로 가하여 TPH 제거 효율을 평가하였다. 또한, 유사펜톤 반응 후 시료에 대한 $BOD_5/COD_{Cr}$ 비를 산정하여 생분해 가능성을 검토하였다. 본 연구 결과, 과산화수소($H_2O_2$) 농도가 1%일 때 TPH 제 거 효율이 가장 높았으며 주입 방법에서는 순간적으로 일회 과산화수소($H_2O_2$)를 시료에 주입하는 것보다 일정 시간 간격으로 연속적으로 과산화수소($H_2O_2$)를 주입하는 것이 TPH 제거 효율이 높은 것으로 나타났다. 또한, 케익 시료의 경우 고액비가 1 : 2일때 TPH 제거 효율이 가장 높은 것으로 나타났다. 한편, 식용유를 사용한 경우 미세토에 흡착된 석유계탄화수소의 탈착을 증진시키는 계면활성 효과로 인하여 용해도가 증가하는 것을 확인하였다. 그러나 유사펜톤 반응 후 생분해도 경향은 반응 조건에 관계없이 반응시간이 경과함에 따라 전반적으로 감소하는 경향을 보여 후속 처리로 생물학적 공정을 연계할 시 미생물의 순응이 필요한 것으로 나타났다. 이와 같이 토양 중에 존재하는 철 성분을 이용하여, 과산화수소($H_2O_2$)만 주입해준 경우 미세토에 흡착되어 있는 유분이 제거되는 유사펜톤 반응을 확인하였지만 그 제거 효율은 매우 낮았고 유사펜톤 반응 종결 후 생물학적 공정의 연계 처리 시 미생물의 순응 기간이 필요한 것으로 확인되었다.

표면 처리재와 레진 시멘트가 IPS Empress 2의 전단결합강도에 미치는 영향 (Effect on Shear Strength of Ceramic Surface Treatment Materials and Three Resin Cements to IPS Empress 2)

  • 예선혜;이규복;이청희
    • 구강회복응용과학지
    • /
    • 제18권3호
    • /
    • pp.157-170
    • /
    • 2002
  • IPS Empress 2의 산 부식 후 표면 처리재와 레진 시멘트 종류에 따른 전단 결합 강도를 비교 분석하기 위해서 실란 처리, 실리카 코팅 그리고 Targis link 처리군으로 분류하고 Panavia F, Variolink II와 Rely-X ARC 레진 시멘트 세종류를 이용해서 9개군에 각 군당 30개의 시편을 제작하였다. 그리고 구강환경에서의 변화를 알아보기 위해서 구강환경과 유사한 조건으로 $37^{\circ}C$ 증류수에서 24시간 수중침지, $37^{\circ}C$ 증류수에서 5주간 수중 침지, 그리고 5주간 수중침지 중 매주 2000회씩 10,000회의 열 순환을 한 다음 각 시편의 전단결합강도를 측정하고 파절면을 주사 전자현미경으로 관찰하여 다음과 같은 결론을 얻었다. 1. 표면처리에 따른 전단결합강도는 모든 군에서 유의한 차이를 보였다. 실란 처리, 실리카 코팅, 그리고 Targis link의 순으로 유의한 결합력의 감소를 보였다(p<0.001). 2. 레진 시멘트의 종류에 따른 차이를 비교한 결과에서 Targis link 도포한 군만 제외하고 나머지 군에서는 레진 시멘트의 종류에 따른 결합강도의 차이를 보였다(p<0.05). 3. 수중 침지 시간에 따른 전단 결합강도는 모든 군에서 유의한 차이를 보이지는 않았지만 실란을 처리 후 Panavia를 사용한 군, 실리카 코팅 처리 후 Variolink를 사용한 군, Targis link 처리 후 Rely-X ARC와 Variolink를 사용한 군에서는 결합력의 감소를 나타내었다(p<0.05). 4. 열 순환 시행시에는 실란과 실리카 코팅 처리후 Rely-X ARC를 사용한 군과 실리카 코팅 처리후 Panavia F를 사용한 군만 제외하고 나머지는 유의한 결합력의 감소를 보였다(p<0.05). 5. 파절 시험 후 시편에 대한 주사 전자 현미경 관찰결과 모든 군에서 복합성 파절 양상을 보였다.

Effects of Extrusion Condition of Barley on the Growth and Nutrient Utilization in Growing Pigs

  • Piao, X.S.;Chae, B.J.;Kim, J.H.;Jin, J.;Cho, W.T.;Han, In K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권5호
    • /
    • pp.783-787
    • /
    • 1999
  • To study the effects of different extrusion conditions of barley on growth performance, nutrient digestibility and nutrient excretion in feces, a total of 150 growing pigs ($Landrace{\times}Duroc{\times}Large$ White; average 24.4 kg body weight) were allotted to five treatments, in a completely randomized block design. The experimental diets were based on corn-soybean and 30% of barley was included in each diet; barley was the only extruded ingredient. The treatments were 1) no extrusion (Control); 2) extrusion at $100^{\circ}C$ without preconditioning (ENLT); 3) extrusion at $150^{\circ}C$ without preconditioning (ENHT); 4) extrusion at $100^{\circ}C$ with preconditioning (ECLT); 5) extrusion at $150^{\circ}C$ with preconditioning (ECHT). Temperature in the barrel was controlled within ${\pm}5^{\circ}C$ by feed rate with the addition of water at the rate of $3{\ell}\;per\;min$. in the extruder for each treatment. For the 6 week experimental period, extrusion of barley improved the average daily gain (ADG) and digestibilities of dry matter, crude protein and gross energy in growing pigs. As compared to control, significant improvements in ADG (p<0.05) were shown in the groups of feeding extruded barley at high temperature (ENHT and ECHT). There were also significant differences in the digestibilities of DM, CP and P between extrusion temperatures. Barley extruded at high temperature gave better digestibilities of DM, CP and GE than barley extruded at low temperature. Extruded barley diet groups showed significantly (p<0.05) lower excretions of DM, nitrogen (N) and P per kg gain as compared to the ground barley group. DM, N and P excretion per kg gain were also significantly lower in pigs fed barley extruded at $150^{\circ}C$ than at $100^{\circ}C$. In conclusion, extrusion considerably improved the nutritive value of barley and it appeared that temperature is the most important variable.

Propofol Post-conditioning Protects against COS-7 Cells in Hypoxia/reoxygenation Injury by Induction of Intracellular Autophagy

  • Kwak, Jin-Won;Kim, Eok-Nyun;Park, Bong-Soo;Kim, Yong-Ho;Kim, Yong-Deok;Yoon, Ji-Uk;Kim, Cheul-Hong;Yoon, Ji-Young
    • 대한치과마취과학회지
    • /
    • 제14권1호
    • /
    • pp.49-56
    • /
    • 2014
  • Background: Propofol (2.6-diisopropylphenol) is a widely used intravenous anesthetic agent for the induction and maintenance of anesthesia during surgeries and sedation for ICU patients. Propofol has a structural similarity to the endogenous antioxidant vitamin E and exhibits antioxidant activities.13) However, the mechanism of propofol on hypoxia/reoxygenation (H/R) injury has yet to be fully elucidated. We investigated how P-PostC influences the autophagy and cell death, a cellular damage occurring during the H/R injury. Methods: The groups were randomly divided into the following groups: Control: cells were incubated in normoxia (5% CO2, 21% O2, and 74% N2) without propofol treatment. H/R: cells were exposed to 24 h of hypoxia (5% CO2, 1% O2, and 94% N2) followed by 12 h of reoxygenation (5% CO2, 21% O2, and 74% N2). H/R + P-PostC: cells post-treated with propofol were exposed to 24 h of hypoxia followed by 12 h of reoxygenation. 3-MA + P-PostC: cells pretreated with 3-MA and post-treated propofol were exposed to 24 h of hypoxia followed by 12 h of reoxygenation Results: The results of our present study provides a new direction of research on mechanisms of propofol-mediated cytoprotection. There are three principal findings of these studies. First, the application of P-PostC at the onset of reoxygenation after hypoxia significantly increased COS-7 cell viability. Second, the cellular protective effect of P-PostC in H/R induced COS-7 cells was probably related to activation of intra-cellular autophagy. And third, the autophagy pathway inhibitor 3-MA blocked the protective effect of P-PostC on cell viability, suggesting a key role of autophagy in cellular protective effect of P-PostC. Conclusions: These data provided evidence that P-PostC reduced cell death in H/R model of COS-7 cells, which was in agreement with the protection by P-PostC demonstrated in isolated COS-7 cells exposed to H/R injury. Although the this study could not represent the protection by P-PostC in vivo, the data demonstrate another model in which endogenous mechanisms evoked by P-PostC protected the COS-7 cells exposed to H/R injury from cell death.

온도.종자수분함량 및 삼투처리가 콩의 발아 및 묘신장에 미치는 영향 (Effects of Temperature, Seed Water Content and Osmoconditioning on Germination and Seedling Elongation of Soybeans)

  • Rak Chun, Seong;Many C., Minor;Eun Hi, Hong
    • 한국작물학회지
    • /
    • 제31권4호
    • /
    • pp.447-453
    • /
    • 1986
  • 콩 품종(williams)의 발아와 묘신장을 두 온도, 세 종자, 수분함양 및 Polyethylene glycol-800(PEG) 처리와 무처리에서 측정하였다. 분할구배치법 사반복으로 실시하였으며 시료를 2시간부터 8일까지 각처리 조합에서 채취하였다. 콩 종자를 0.2% Thiram을 첨가한 30% PEG 여액에 놓아 15$^{\circ}C$에서 6 일간 침청후 증류수로 선정하여 25.5$^{\circ}C$에서 3 일간 건조하여 10개의 처리 또는 무처리 종자를 plastic petri-dish안의 9 cm 여과지에 놓아 수분함양에 정당한 증류수를 첨가하였다. Parafilm으로 밀봉하여 항온무광조건의 처리 온도에서 발아시켰다. 수분함양이 50% 또는 이하인 처리에서는 두 온도 모두 묘신장이 일어나지 않았다. PEG를 이용한 삼투처리는 15$^{\circ}C$에서는 묘수분 흡수와 체신장간에 정의 상관 효과를 보였으나 3$0^{\circ}C$에서는 거의 없었다. 종자 또는 묘수분함량은 발아기간동안 초기에 급속히 증가하여 15$^{\circ}C$에서는 56시간에, 그리고 3$0^{\circ}C$에서는 28시간에 60%에 도달하였다. 묘신장은 종자수분함양이 15$^{\circ}C$에서는 60%에서 시작되었지만 3$0^{\circ}C$에서는 20시간에 시작되었다. 콩묘는 15$^{\circ}C$에 비하여 3$0^{\circ}C$에서 사배 이상 신장되었다. 발아기간 동안의 수분흡수양상은 이 시험에서는 두 단계로 특정되었다.

  • PDF

사용후핵연료 차세대관리 종합공정 실증시설내 후면 차폐문의 구조적 안전성 평가 (Structural Safety Analysis Of Rear Door in ACP Hotcell Facility for Spent Fuel Treatment)

  • 권기찬;구정회;이은표;정원명;유길성;이원경;국동학;조일제
    • 방사성폐기물학회지
    • /
    • 제4권1호
    • /
    • pp.77-85
    • /
    • 2006
  • 한국원자력연구소에서는 현재 사용후핵연료의 효율적인 관리를 위한 차세대관리 종합공정의 실증용 핫셀을 건설중에 있다. 이 핫셀에서 모든 물품의 반출입은 후면 차폐문을 통해 이루어지므로 차폐문의 사용빈도가 매우 크며, 따라서 후면 차폐문의 구조적 안전성 유지가 필수적이다. 본 논문에서는 핫셀의 후면 차폐문에 대한 구조적 안전성을 유한요소 해석을 통해 평가하였다. 후면 차폐문을 닫을 때 벽면의 차폐문틀과 충돌하면서 발생하는 구조적 변형 에 대한 안전성 평가를 위해 이 상황을 충돌-접촉 문제로 가정하고 동적 해석을 수행하였다. 또한 충돌시 반력에의한 후면 차폐문의 전도 가능성 및 이동중 갑작스럽게 정지할 경우 관성에 의한 전도 가능성에 대해서도 해석을 수행하였다. 해석 결과를 통해 차폐문과 차폐문틀 모두 충돌에 의한 구조적 변형에 대해 충분히 안전함을 확인할 수 있었으며, 여러 사고 조건에 대해서도 후면 차폐문의 전도가 일어나지 않고 안정성을 유지함을 보였다.

  • PDF

사용후핵연료 처리를 위한 ACP 실증시설내 개폐형 작업대의 구조적 안전성 평가 (Structural Safety Analysis of Openable Working Table in ACP Hot Cell for Spent Fuel Treatment)

  • 권기찬;구정회;이은표;정원명;유길성;이원경;조일제;국동학
    • 방사성폐기물학회지
    • /
    • 제4권1호
    • /
    • pp.17-24
    • /
    • 2006
  • 한국원자력연구소에서는 현재 사용후핵연료의 효율적인 관리를 위한 차세대관리 종합공정 (ACP)의 실증용 핫셀을 건설중에 있다. 본 논문에서는 핫셀 내부의 리어도어(rear door)와 만나는 부분에 설치될 작업대(working table)의 구조적 안전성을 유한요소 해석을 통해 평가하였다. 이 부분의 작업대는 물품들의 반출입을 위해 개폐식으로 설계되었기 때문에 다른 작업대에 비해 지지 부위가 적으므로 구조적 안전성 평가가 반드시 필요하다. 핫셀을 가동할 때 작업대 위에 공정 장치들을 반입하거나 핫셀 크레인을 사용해 적재하게 되므로, 안전성 평가를 위해 정적 구조 해석과 동적 구조 해석들 함께 수행하였다. 해석 결과를 통해 두 경우 모두에 대해 개폐형 작업대가 구조적으로 충분히 안전함을 확인할 수 있었다. 또한 50 cm 낙하 충돌의 경우에도 작업대의 파손이나 붕괴가 일어나지 않고 안전성이 유지되었다.

  • PDF

Proliferation, Apoptosis, and Telomerase Activity in Human Cord Blood CD34+ Cells Cultured with Combinations of Various Cytokines

  • Ahn, Myung-Ju;Lee, Hye-Sook;Jang, Mi-Yune;Choi, Jung-Hye;Lee, Young-Yeul;Park, Hyung-Bae;Lee, Yong-Sung
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권3호
    • /
    • pp.422-428
    • /
    • 2003
  • Umbilical cord blood (UCB), a rich source of hematopoietic stem/progenitor cells, has been proposed as an alternative to bone marrow and peripheral blood for transplantation treatment. Ex vivo expansion of cord blood stem cells could make the use of cord blood transplant feasible even for adult patients. However, the optimal cytokine cocktail for expansion of stem cells is yet to be established. This study compares proliferation, apoptosis, and telomerase activities in human cord blood stem cells cultured ex vivo with FLT3 ligand (FL)/thrombopoietin (TPO) or FL/TPO/stem cell factor (SCF), with a view to determine optimal combination of cytokines. CD34+ cells were cultured in DMEM containing either FL (50 ng/ml) and TPO (10 ng/ml) (FT group) or FL (50 ng/ml), TPO (10 ng/ml) and SCF (50 ng/ml) (FTS group). The cell proliferation rate was ten times higher in the FTS group. Although cells cultured with the two different combinations of cytokines were maintained for a long term (up to 8 weeks), a large number of cells underwent differentiation during this period. Cells cultured in FTS displayed lower levels of apoptosis compared to those of the FT group during the Initial 7 days of culture. The CD34+ fraction in both groups was markedly decreased to $21-30\%$ , and only $5-6\%$ was detected at 14 days of culture. Telomerase activity detected in human CD34+ cord blood at low levels was upregulated during the early phase of culture and decreased to baseline levels in the later phase. The telomerase activity of cord blood cultured in FT was lower than that of the FTS group. Our results suggest that, on adding stem cell factors to the FT cytokines, cultured CD34+ cord blood cells display a greater degree of cell proliferation and decreased apoptosis. However, during CD34+ cord blood cell culture, a Barge number of cells undergo differentiation, indicating that more potent novel cytokines or new culture conditioning methods should be developed to maintain their ability to engraft and sustain long-term hematopoiesis.

Light emitting diode를 이용한 광중합 시 금합금과 교정용 금속 브라켓의 전단접착강도 (Shear bond strength between gold alloy and orthodontic metal bracket using light emitting diode curing light)

  • 정민호;정신혜;손원준
    • 대한치과교정학회지
    • /
    • 제40권1호
    • /
    • pp.27-33
    • /
    • 2010
  • 성인 교정환자의 수요가 증가하면서 보철물 표면에 교정장치를 부착해야 하는 빈도가 늘어나고 있다. 본 연구는 금속표면에 교정장치를 직접 접착하고자 할 때 사용하는 metal primer와 silicoating으로 각각 금합금의 표면을 처리한 후 light emitting diode (LED) 광중합기를 사용하여 광중합을 시행하여 접착력을 평가해 보고자 하였다. Type III gold alloy 표면에 aluminum oxide를 이용한 sandblasting 후 4-META 계열의 metal primer로 처리한 시편과 silica를 이용한 sandblasting 후 silane으로 처리한 시편에 광중합형 접착레진인 Transbond XT를 이용하여 금속 브라켓을 접착하고 접착 후 1시간, 6시간, 24시간 후 전단접착강도의 변화를 비교, 관찰하였다. 측정된 값을 이원분산분석(two-way analysis of variance)을 이용하여 비교하고 두 가지 표면처리 방법 간에 접착강도에 차이가 있는지도 살펴보았다. 연구결과, metal primer에 비하여 silicoating을 시행한 시편에서 높은 전단접착강도가 관찰되었으며, 시간이 경과할수록 접착강도가 증가하는 경향을 보였다. Adhesive remnant index (ARI)에서는 군 간 유의한 차이를 보이지 않았다. LED를 이용하여 광중합을 시행하는 경우 법랑질에 비하여 긴 시간의 광중합을 실시하고 metal primer보다는 silicoating 방법을 사용하는 것이 금합금표면에 교정장치를 부착할 때 더 높은 접착강도를 얻을 수 있을 것이다.