• 한국지능시스템학회논문지
• /
• 제17권3호
• /
• pp.316-321
• /
• 2007

본 연구에서는 베이지안 망 구조 학습에서, 학습 데이터의 특정 부분집합이 학습된 망의 각 연결 구조(edge)의 형성에 기여하는 정도를 정량화하는 방법을 제안한다. 생물학 정보의 분석 등에 베이지안 망 학습을 이용하는 경우, 제안된 방법은 망의 각 연결 구조의 형성에 특정 군집 데이터가 기여하는 정도의 정량화가 가능하다. 제안된 방법의 유효성을 보이기 위해, 벤치마크 베이지안 망을 이용하여 제안된 방법이 망 연결 구조에 대한 데이터 군집별 기여도를 효과적으로 정량화 할 수 있음을 보인다.

• International Journal of Aerospace System Engineering
• /
• 제6권2호
• /
• pp.11-16
• /
• 2019

A system analysis program has been developed for a gas generator cycle liquid rocket engine of 30 ton class. Numerical models have been proposed for a combustor, a turbopump, a gas generator and pressure drop through a regenerative cooling system. Numerical algorithm has been validated by comparing with the published data of MC-1. The major source of error is not the numerical algorithm but the imperfect performance models of subsystems. So the precision of the program can be improved by revising the performance models using experimental data. The sea level specific impulse and vacuum specific impulse have been demonstrated for a 30 ton class gas generator engine. The optimal condition of combustor pressure and mixture ratio for specific impulse which is a typical characteristic of a gas generator cycle engine has been illustrated.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.751-767
• /
• 2015

A new procedure is proposed for assessing probabilistic condition of structures considering effect of measured data uncertainty. In this procedure, multiple Finite Element (FE) models are identified by using weighting vectors that represent the uncertainty conditions of measured data. The distribution of structural parameters is analysed using a Principal Component Analysis (PCA) in relation to uncertainty conditions, and the identified models are classified into groups according to their similarity by using a K-means method. The condition of a structure is then assessed probabilistically using FE models in the classified groups, each of which represents specific uncertainty condition of measured data. Yeondae bridge, a steel-box girder expressway bridge in Korea, is used as an illustrative example. Probabilistic condition of the bridge is evaluated by the distribution of load rating factors obtained using multiple FE models. The numerical example shows that the proposed method can quantify uncertainty of measured data and subsequently evaluate efficiently the probabilistic condition of bridges.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1291-1296
• /
• 2000

A basis for the direct use of data from nondestructive evaluation methods in bridge management systems is presented. Bridge management systems use integer-valued condition ratings to recognize conditions of bridge elements, to model progression of deterioration, and to determine repair needs. Data from nondestructive evaluation methods can inform management systems on the extent of damage, on the initiation of deterioration processes, and on the exposure of bridge elements to aggressive agents. In addition, data obtained through nondestructive evaluation methods allow the formation of models of specific deterioration process. The use of these data in bridge management systems requires redefinition of condition ratings together with the creation of procedures for automated interpretation of data. By these action, nondestructive evaluation methods are directly used to assign condition ratings, and condition ratings are made into terse form of NDE data that are compatible with present day bridge management systems. This paper reports work in progress to strategic use of nondestructive evaluation methods in bridge management system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3518-3523
• /
• 2007

An analysis program of specific impulse has been developed for a gas generator cycle rocket engine. The program has been verified by comparing the published performance data of the same cycle engine with RP-1 as fuel. A model for pressure drop of regenerative cooling and film cooling mass flow rate has been suggested to satisfy the necessary cooling condition with Jet-A1 as fuel. The engine mixture ratio is defined by the film cooling mass flow rate and the core mixture ratio. The optimal condition of the combustor pressure and engine mixture ratio has been found for maximum specific impulse.

• 설비공학논문집
• /
• 제24권11호
• /
• pp.759-766
• /
• 2012

To estimate the cooling load for the following day, outdoor temperature and humidity are needed in hourly base. But the meteorological administration forecasts only maximum and minimum temperature. New methodology is proposed for predicting hourly outdoor temperature and humidity by using the forecasted maximum and minimum temperature. The correlations for normalized outdoor temperature and specific humidity has been derived from the weather data for five years at Seoul, Daejeon and Pusan. The correlations for normalized temperature are independent of date, while the correlations for specific humidity are linearly dependent on date. The predicted results show fairly good agreement with the measured data. The prediction program is also developed for hourly outdoor dry bulb temperature, specific humidity, dew point, relative humidity, enthalpy and specific volume.

• 한국태양에너지학회 논문집
• /
• 제30권2호
• /
• pp.65-71
• /
• 2010

The hydrologic performance characteristics of small hydro power(SHP) sites located in four major river systems have been studied. The model, which can predict flow duration characteristic of stream, was developed to analyze the variation of inflow caused from rainfall condition. And another model to predict hydrologic performance for SHP plants is established. Monthly inflow data measured at Andong dam for 32 years were analyzed. The predicted results from the developed models in this study showed that the data were in good agreement with measured results of long term inflow at Andong dam. The results from hydrologic performance analysis for SHP sites located on five major river systems based on the models developed in this study show that the specific design flowrate and specific output of SHP site have large difference between the river systems.

• 아동학회지
• /
• 제34권6호
• /
• pp.1-11
• /
• 2013

The purpose of this study was to investigate the process of counterfactual reasoning which children undergo, based on mental model theory and dual process theory. The subjects were 120 four-year-olds and 120 five-year-olds from Ulsan. Counterfactual reasoning task conditions were created, including task type and content, which were type 1-specific, type 1-general, type 2-specific, type 2-general. There were two stories used for each task condition. Children's counterfactual reasoning score range was 0 to 8. Data were analyzed using SPSS by mean, standard deviation, one sample t-test, repeated measures of Anova. The results of this study were as follows. First, children's counterfactual reasoning was above chance level regardless of the task condition. Second, children's counterfactual reasoning was lowest when type 1-specific or type 2-specific tasks were given, slightly higher when type1-general tasks were given, and the highest when type 2-general tasks were given. There was no significant difference between 4-year-old and 5-year-old children's counterfactual reasoning.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.58-59
• /
• 2006

In Spray Forming, specific enthalpy is a key parameter in the deposition process as it influences the thermal condition of the impinging droplets as well as that of the deposit surface. An empirical model for the distribution of specific enthalpy in the spray cone was developed as an easy to handle alternative to numerical models with which the descriptive partial differential equations are solved numerically. The model results were compared with the experimental data to validate its applicability.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.85-88
• /
• 2007

본 연구에서는 베이지안 망 구조 학습에서, 학습 데이터의 특정 부분집합이 학습된 망의 각연결 구조(edge)의 형성에 기여하는 정도를 정량화하는 방법을 제안한다. 생물학 정보의 분석 등에 베이지안 망 학습을 이용하는 경우, 제안된 방법은 망의 각 연결 구조의 형성에 특정 군집 데이터가 기여하는 정도의 정량화가 가능하다. 제안된 방법의 유효성을 보이기 위해, 벤치마크 베이지안 망을 이용하여 제안된 방법이 망 연결 구조에 대한 데이터 군집별 기여도를 효과적으로 정량화 할 수 있음을 보인다.