• Geomechanics and Engineering
• /
• v.13 no.5
• /
• pp.757-774
• /
• 2017

The subgrade reaction modulus of a large mat foundation was investigated by using a numerical analysis and a field case study. The emphasis was on quantifying the appropriate method for determining the subgrade reaction modulus for the design of a flexible mat foundation. A series of 3D non-linear FE analyses are conducted with special attention given to the subgrade reaction modulus under various conditions, such as the mat width, mat shape, mat thickness, and soil condition. It is shown that the distribution of the subgrade reaction modulus is non-uniform and that the modulus of subgrade reaction at both the corners and edges should be stiffer than that at the center. Based on the results obtained, a simple modification factor for the subgrade reaction modulus is proposed depending on the relative positions within the foundation in weathered soil and rocks.

• Journal of Korean Academy of Nursing
• /
• v.48 no.3
• /
• pp.323-334
• /
• 2018

Purpose: The purpose of this study was to develop a scale to measure person-centered critical care nursing and verify its reliability and validity. Methods: A total of 38 preliminary items on person-centered critical care nursing were selected using content validity analysis of and expert opinion on 72 candidate items derived through literature review and qualitative interviews. We conducted a questionnaire survey with 477 nurses who worked in intensive care units. The collected data were analyzed using exploratory factor analysis (EFA) and confirmative factor analysis (CFA) with SPSS and AMOS 24.0 program. Results: EFA was performed with principal axis factor analysis and Varimax rotation. The 15 items in 4 factors that accounted for 50.8% of the total variance were identified by deleting the items that were not meet the condition that the commonality should be .30 or more and the factor loading over .40. We named the factors as compassion, individuality, respect, and comfort, respectively. The correlation coefficient between this scale and the Caring Perception Scale was r=.57 (p<.001), which determined concurrent validity. The item-total correlation values ranged from .39 to .63, and the internal consistency for the scale was Cronbach's ${\alpha}=.84$. Conclusion: The reliability and validity of the 15 item person-centered critical care nursing scale were verified. It is expected that the use of this scale would expand person-centered care in critical care nursing.

• The Plant Pathology Journal
• /
• v.30 no.3
• /
• pp.236-244
• /
• 2014

The plant pathogen Fusarium graminearum causes Fusarium head blight in cereal crops and produces mycotoxins that are harmful to animals and humans. For the initiation and spread of disease, asexual and sexual reproduction is required. Therefore, studies on fungal reproduction contribute to the development of new methods to control and maintain the fungal population. Screening a previously generated transcription factor mutant collection, we identified one putative $C_2H_2$ zincfinger transcription factor, pcs1, which is required for both sexual and asexual reproduction. Deleting pcs1 in F. graminearum resulted in a dramatic reduction in conidial production and a complete loss of sexual reproduction. The pathways and gene ontology of pcs1-dependent genes from microarray experiments showed that several G-protein related pathways, oxidase activity, ribosome biogenesis, and RNA binding and processing were highly enriched, suggesting that pcs1 is involved in several different biological processes. Further, overexpression of pcs1 increased conidial production and resulted in earlier maturation of ascospores compared to the wild-type strain. Additionally, the vegetative growth of the overexpression mutants was decreased in nutrient-rich conditions but was not different from the wild-type strain in nutrient-poor conditions. Overall, we discovered that the pcs1 transcription factor positively regulates both conidiation and sexual reproduction and confers nutrient condition-dependent vegetative growth.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.659-672
• /
• 2013

Purpose: The purpose of this study was to estimate life time of halogen lamps and acceleration factors using accelerated life test. Methods: Voltage was selected as an accelerating variable through the technical review about failure mechanism. The test was performed at 14.5V, 15.5V and 16.5 for 4,471 hours. It was assumed that the lifetime of Halogen lamps follow Weibull distribution and the inverse power life-stress relationship models. Results: Mean lifetimes of pin and screw types were 19,477 hours and 6,056 hours, respectively. In addition, acceleration factor of two items are calculated as 4.8 and 2.2 based on 15.5V, respectively. Conclusion: The life-stress relationship, acceleration factor, and MTTF at design condition are estimated by analyzing the accelerated life test data. These results suggest that voltage was very important factor to accelerate life time in the case of halogen lamps and the life time of pin type is three times longer than screw type lamps.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.95-101
• /
• 2016

Purpose: Recently, high-rise buildings are popular in korea due to high rate of land usage and cost performance in urban area. However, high-rise building causes several problems such as safety issues, cooling/heating load, stack effect, disaster prevention etc. The stack effect is one of the representative problems. Even though there are many researches on stack effect, there are few studies on design guideline considering local condition. Method: This study focuses on the change of pressure distribution according to the design factors which affects the airflow in high-rise residential buildings by simulation analysis. In this study, city, building floor, stairwell door leakage area, elevator door leakage area and changes of layout were considered ad the design factor. Result: The simulation results indicate that building height and ambient air temperature are significant design factor for stack effect.

• Membrane Journal
• /
• v.19 no.3
• /
• pp.212-221
• /
• 2009

This study focuses on preparation of PVDF/PDMS composite membranes to effectively separate butanol from water-butanol mixture using pervaporation. We prepared various composite membranes by changing PVDF concentration of support layer and PDMS cross-linking condition of active layer. Pervaporation performance was tested by measuring butanol flux and separation factor with various cases of butanol concentration, temperature, and flow rate of feed. As results, performance of our novel PVDF/PDMS membranes surpasses that of PVDF/POMS membrane, manufactured by GKSS (Germany), in term of butanol flux, permeate concentration, and separation factor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.786-790
• /
• 2012

A variety of diagnostic tests are widely applied in the field in industry to evaluate the condition of high voltage (HV) motor stator insulation. In this paper, the influence of temperature on the stator insulation diagnostic tests such as the insulation resistance, AC current, dissipation factor, and partial discharge measurements are studied and reported. The tests are performed with the HV motor stator winding temperature set between $40^{\circ}C$ to $80^{\circ}C$ in $10^{\circ}C$ intervals. It is shown that the AC current, dissipation factor, and partial discharge magnitude steadily increase with temperature, which suggests that temperature must be taken into account in the interpretation of the test results.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.19-26
• /
• 2018

PURPOSES : The main purpose of this study is suggest of field bond strength evaluation method for more objective evaluation method through Evaluation of Bond Strength Properties with changing aspect ratio and temperature. METHODS : The evaluation is laboratory bond strength test. Using the core machine, the pull-off test method ; the bond strength test of interface layer the universal testing machine. RESULTS : As a result of the laboratory bond strength evaluation, it was verified that the bond strength by aspect ratio decreases linearly with increasing aspect ratio and the bond strength properties by temperature change existed at high and low temperature condition relative to odinary temperature condition. CONCLUSIONS : According to the results of laboratory bond strength evaluation, the field bond strength evaluation results suggest applying the proposed correction factor (0.8, 1.0, 1.4, 1.9) according to aspect ratio(0.5, 0.1, 1.5, 2.0), For more objective evaluation of the bond strength, it is analyzed that the evaluation value is within $6{\sim}32^{\circ}C$ and the result can be obtained within 5% of the coefficient of variation.

• Research in Community and Public Health Nursing
• /
• v.17 no.2
• /
• pp.153-165
• /
• 2006

Purpose: The purpose of this study was to develop and test a structural model on cardiovascular disease risk factors among male manufacturing workers. Methods: Data were collected through questionnaires and health exams from 201 workers in a local electronic company during September 2004. Data analysis was done with SAS 9.1 for descriptive statistics and PC-LISREL 8.54 for covariance structural analysis Results: The overall fit of the hypothetical model to the data was moderate, it was modified by deleting five paths. The modified model had a better fit to the data($x^2=504.23$(p<001, df: 180), $x^2/df=2.80$, GFI=.95, RMR=.07, NFI=.90, PGFI=.64). Health behaviors and psychosocial distress were found to have significant direct effects on the cardiovascular disease risk factors. Self-concept had direct effect on psychosocial distress or health behaviors. Self-concept, work environment, and work condition had direct effect on social support. Work environment had indirect effect on psychosocial distress. Social support had indirect effect on health behaviors. But work environment and work condition were found to have little direct effect on health behaviors, psychosocial distress or cardiovascular disease risk factors. Conclusion: A cardiovascular health promotion program should therefore include psycho-social factors as well as health behavioral determinants in worksites.

• Structural Engineering and Mechanics
• /
• v.17 no.5
• /
• pp.627-639
• /
• 2004

The objective of this research was to evaluate the performance of metal-plate-connected truss joints subjected to cyclic loading conditions that simulated seismic events in the lives of the joints. We also investigated the duration of load factor for these joints. We tested tension splice joints and heel joints from a standard 9.2-m Fink truss constructed from $38-{\times}89-mm$ Douglas-fir lumber: 10 tension splice joints for static condition and for each of 6 cyclic loading conditions (70 joints total) and 10 heel joints for static condition and for each of 3 cyclic loading conditions (40 joints total). We evaluated results by comparing the strengths of the control group (static) with those of the cyclic loading groups. None of the cyclic loading conditions showed any strength degradation; however, there was significant stiffness degradation for both types of joint. The results of this research show that the current duration of load factor of 1.6 for earthquake loading is adequate for these joints.