• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.105-114
• /
• 2019

In this paper, simulation tests were conducted with similar materials to study the distribution of residual voids in longwall goaf. Short-time step loading was used to simulate the obvious deformation period in the later stage of arch breeding. Long-time constant loading was used to simulate the rheological stage of the arch forming. The results show that the irregular caving zone is the key area of old goaf for the subsidence control. The evolution process of the stress arch and fracture arch in stope can be divided into two stages: arch breeding stage and arch forming stage. In the arch breeding stage, broken rocks are initially caved and accumulated in the goaf, followed by the step deformation. Arch forming stage is the rheological deformation period of broken rocks. In addition, under the certain loads, the broken rock mass undergoes single sliding deformation and composite crushing deformation. The void of broken rock mass decreases gradually in short-time step loading stage. Under the water lubrication, a secondary sliding deformation occurs, leading to the acceleration of the broken rock mass deformation. Based on above research, the concept of equivalent height of residual voids was proposed, and whose calculation equations were developed. Finally, the conceptual model was verified by the field measurement data.

• Journal of Hospice and Palliative Care
• /
• v.21 no.4
• /
• pp.144-151
• /
• 2018

Purpose: The purpose of this study was to test the reliability and validity of an instrument that measures spiritual needs of families of terminal cancer patients. Methods: This methodological study was processed as follows: 1) The preliminary 26 items were developed based a conceptual framework of spiritual needs of families of patients with cancer. 2) The content was validated by an expert panel (Three nursing professors and five hospice nursing specialists). 3) The instrument was validated by a survey (n=111). 4) Twenty-six items were selected and used for the final version of the scale. Results: Three factors were extracted through factor analysis: 'relationship with God/Acceptance of dying', 'recovery of relationship/hope and peace', and 'meaning and purpose of life'. These factors explained 61.088% of the total variance. Cronbach's alpha and Guttman split-half coefficient of the 26 items were 0.944 and 0.826 respectively. Conclusion: This scale was identified as a valid and reliable tool. Therefore, the scale is useful in assessing spiritual needs of families of terminal cancer patients in the field of hospice and palliative care.

• The Mathematical Education
• /
• v.57 no.4
• /
• pp.353-369
• /
• 2018

This study started with the following questions. Suppose that students do not accept various forms of geometric series tasks as the same task. Also, let's say that the approach was different for each task. Then, when they realize that they are the same task, how will students connect the different approaches? This study is a process of pro-actively confirming whether or not such a question can be made. For this purpose, three students in the second grade of high school participated in the teaching experiment. The results of this study are as follows. It also confirmed how the students think about the various types of tasks in the geometric series. For example, students have stated that the value is 1 in a series type of task. However, in the case of the 0.999... type of task, the value is expressed as less than 1. At this time, we examined only mathematical expressions of students approaching each task. The problem of reachability was not encountered because the task represented by the series symbol approaches the problem solved by procedural calculation. However, in the 0.999... type of task, a variety of expressions were observed that revealed problems with reachability. The analysis of students' expressions related to geometric series can provide important information for infinite concepts and limit conceptual research. The problems of this study may be discussed through related studies. Perhaps more advanced research may be based on the results of this study. Through these discussions, I expect that the contents of infinity in the school field will not be forced unilaterally because there is no mathematical error, but it will be an opportunity for students to think about the learning method in a natural way.

• Journal of The Korean Association For Science Education
• /
• v.41 no.3
• /
• pp.193-202
• /
• 2021

This study aims to identify what kind of epistemological resources were activated in unproductive and productive practice by students participating in scientific argumentation, and to explore which contexts result in changes in argumentative practice. We collected transcriptions of participants' argumentative lessons and interview, participants' work sheets, and researchers' field notes. The analysis revealed that the focus group activated different kinds of epistemological resources depending on their practice; propagated, belief, and accumulation in unproductive practice and constructed, understanding, accumulation, formation and rebuttal in productive practice. We found two contextual cues that led to these changes; unfamiliar form of argumentative task was provided and emotional, epistemic, and conceptual support of the epistemic authority. This work can be provided as additional case studies to analyze changes in practice according to learner context-dependent epistemology, and we expect to contribute to discussions of productive epistemology and stabilization for students' authentic science engagement.

• The Mathematical Education
• /
• v.60 no.1
• /
• pp.1-19
• /
• 2021

This study investigates students' conceptions of fractions from a measurement approach while providing a technological environment designed to support students' understanding of the relationships between quantities and adjustable units. 13 third-graders participated in this study and they were involved in a series of measurement tasks through task-based interviews. The tasks were devised to investigate the relationship between units and quantity through manipulations. Screencasting videos were collected including verbal explanations and manipulations. Drawing upon the theory of semiotic mediation, students' constructed concepts during interviews were coded as mathematical words and visual mediators to identify conceptual profiles using a fine-grained analysis. Two students changed their strategies to solve the tasks were selected as a representative case of the two profiles: from guessing to recursive partitioning; from using random units to making a relation to the given unit. Dragging mathematical objects plays a critical role to mediate and formulate fraction understandings such as unitizing and partitioning. In addition, static and dynamic representations influence the development of unit concepts in measurement situations. The findings will contribute to the field's understanding of how students come to understand the concept of fraction as measure and the role of technology, which result in a theory-driven, empirically-tested set of tasks that can be used to introduce fractions as an alternative way.

• Structural Engineering and Mechanics
• /
• v.77 no.3
• /
• pp.343-354
• /
• 2021

The frequencies formulas of the bridge are of great importance in the design process since these formulas provide insight dynamic characteristics of the structure, which guides the designers to parametric analyses and the layout of the bridge in conceptual or preliminary design. Continuous rigid frame bridge is popular in the mountainous area. Mostly, this type of bridge was simplified either as a girder or cantilever when calculating the frequency, however, studies showed that the different configuration of the bridge made the problem more complex, and there is no unified fundamental calculation pattern for this kind of bridge. In this study, an empirical frequency equation is proposed as a function of pier's height, stiffness of pier and the weight of the structure. A unified fundamental frequency formula is presented based on the energy principle, then the typical continuous rigid frame bridge is investigated by finite element method (FEM) to study the dynamic characteristics of the structure, and then several key parameters are investigated on the effect of structural frequency. These parameters include the number, position and stiffness of the tie beam. Nonlinear regression analyses are conducted with a comprehensive statistical study from plenty of engineering structures. Finally, the proposed frequency equation is validated by field test results. The results show that the fundamental frequency of the continuous rigid frame bridge increases more than 15% when the tie beams are set, and it increases with the stiffness ratio of tie beam to pier. The results also show that the presented unified fundamental frequency has an error of 4.6% compared with the measured results. The investigation can predicate the approximate longitudinal fundamental frequency of continuous ridged frame bridge, which can provide reference for the seismic response and dynamic impact factor design of the pier.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.115-123
• /
• 2022

Recently, the adoption of BIM technology in domestic civil engineering projects has continually increased both in its numbers and scope. However, the BIM model was developed and used after the 2D design was developed instead of creating the BIM model from the conceptual design phase. BIM must be used throughout every phase of design and construction to use BIM for its original purpose. However, if BIM application is applied in heavy civil projects without a step-by-step guideline, it can confuse the market and face industry resistance to using BIM. Therefore, BIM is currently being used step by step in the civil engineering field by using BIM as a conversion design. However, the BIM conversion design method, currently being performed in the Preliminary design stage, has many difficulties due to low work efficiency. This paper analyzes the existing process of converting a 2D design into a 3D BIM model while addressing the issues related to its low work efficiency. To this end, a novel approach to 2D to BIM conversion for the design development stage is proposed.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.506-517
• /
• 2022

The study was conducted to identify and clarify the conceptual definitions and attributes of caregiving satisfaction in family caregivers of patients with dementia. The hybird model was used to perform the concept analysis of caregiving satisfaction. Results from both the theoretical review and a field study including 7 participants were included in final process. The concept of caregiving satisfaction was found to have three dimensions with seven attributes. Caregiving satisfaction by family caregivers of patients with dementia was defined as positive of aspects of caregiving usually experienced in three dimensions such as interpersonal dimensions (accomplishing a duty, reciprocity, strengthening of the relationship), role performance dimensions (feeling of accomplishment, emotional reward, emotional comfort) and meaning of role dimensions (positive meaning-making). Based on the results, a tool for measuring caregiving satisfaction among Koreans family caregivers of patients with dementia and effective programs for enhancing caregiving satisfaction should be developed in future studies.

• Korean journal of aerospace and environmental medicine
• /
• v.30 no.3
• /
• pp.83-85
• /
• 2020

In commemoration of Vol. 30, Issue 3, our journal prepared five review articles and one original paper. The global outbreak of COVID-19 in 2020 has impacted our society, and especially the aviation and travel industries have been severely damaged. Kwon presented the aviation medical examination regulations related to COVID-19 announced by the Ministry of Land, Infrastructure, and Transport of the Republic of Korea. Lim summarized various efforts of airlines to overcome the crisis in the aviation industry. He also discussed the management of these aircraft as the number of airplanes landing for long periods increased. Finally, he suggested various quarantine guidelines at airports and onboard aircraft. COVID-19 has had a profound impact on mental health as well as physical effects. Kim investigated the impact of COVID-19 on mental health and suggested ways to manage the stress caused by it. The Internet of Things (IoT) refers to a technology in which devices communicate with each other through wired or wireless communication. Hyun explained the current state of the technology of the IoT and how it could be used, especially in the aviation field. In the area of airline service, various situations arise between passengers and crew. Therefore, role-playing is useful in performing education to prepare and respond to passengers' different needs appropriately. Ra introduced the conceptual background and general concepts of role-playing and presented the actual role-play's preparation process, implementation, evaluation, and feedback process. For a fighter to fly for a long time and perform a rapid air attack, air refueling is essential, which serves refueling from the air rather than from the aircraft base. Koo developed a questionnaire based on the HFACS (Human Factors Analysis and Classification System) model and used it to conduct a fighter pilot survey and analyze the results.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.175-181
• /
• 2023

In offshore plants, various equipments including cranes and davits are used for safety management. Hydraulic cylinder type actuators are mainly used for luffing operations such as cranes and davits. However, in the case of a cylinder using hydraulic pressure, a separate power pack is required to supply hydraulic pressure. When used for a long time, maintenance costs such as sticking of hydraulic valves, contamination of hydraulic oil and deterioration of hydraulic hoses occur. In addition, a lot of hydraulic oil is used in the handling of cranes and davits, which causes marine pollution due to management problems. As a result, as interest in marine pollution prevention has increased recently, interest in actuators that do not use hydraulic pressure is also increasing. Therefore, in this study, we intend to develop a davit with an electric cylinder type actuator that uses electricity rather than hydraulic pressure by the SOLAS regulation. In other words, the conceptual design of the davit driven through the linear motion of the ball screw using electricity is performed, and the structural safety of the drive is also reviewed so that it can be utilized in the industrial field.