• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1596-1607
• /
• 2000

The optimal design of auto-catalyst needs a good compromise between the pressure drop and flow uniformity in the substrate. One of the effective methods to achieve this goal is to use the concept of radially variable cell density. But this method has not been examined its usefulness in terms of chemical behavior and conversion performance. In this work, two-dimensional performance prediction of catalyst coupled with turbulent reacting flow simulation has been used to evaluated the benefits of this method n the flow uniformity and conversion efficiency. The results showed that two cell combination of 93cpsc and 62 cpsc was the most effective for improved pressure drop and conversion efficiency due to balanced space velocity and efficient usage of geometric surface area of channels. It was also found that large temperature difference between the bricks in case that the edge of the frontal face of brick has too much lower cell density(less than 67% of cell density of the center of the brick). This study has also demonstrated that the present computational results show the better prediction accuracy in terms of CO, HC and NO conversion efficiencies compared to those of conventional 1-D adiabatic model by comparison with experimental results.

• 한국수자원학회논문집
• /
• 제35권5호
• /
• pp.631-638
• /
• 2002

시계열의 예측은 통상 추계학적 모형에 의해 수행하여 왔다. 그러나 본 연구에서는 퍼지 개념을 이용한 퍼지 시계열 모형에 의해 강수량 예측을 수행하였다. 기존에 제안된 퍼지 시계열 모형을 이용하여 예측을 수행하고, 예측 능력을 향상시키기 위하여 퍼지 시계열과 뉴로-퍼지 시스템을 연계한 새로운 방법론을 제안하여 상호 비교ㆍ분석하였다. 이를 위하여 미국 일리노이주의 강수량 시계열 예측에 적용하였으며, 예측 결과, 기존의 모형보다 본 연구에서 제안한 방법론의 결과가 더 정확함을 알 수 있었다.

• 한국실내디자인학회논문집
• /
• 제24권2호
• /
• pp.3-10
• /
• 2015

Themed hotels is a new form of hotel development that is rising at home and abroad. In the hospitality industry has a leading position. And The design of the themed hotel is different from tradition as hotel as it more innovative. People are attracted to themed hotel for its' unique interior design especially the guest room. For the sake of promoting the themed hotel's running better, guest room design characteristics can't be neglected. Therefore, this paper will analyze the characteristics of the guest's room design in the themed hotel. This paper initially narrates the concept, features and current situation, and then makes an analysis about the types of theme hotels in combination with examples. Secondly, through the thesis analysis of prior research, key words, hybridity, interactions, symbolic, diversity and regionalism about features of rooms in theme hotel are given. Finally, examples about theme hotels at home and abroad opened after 2005 are taken as the center, through which features of rooms in each theme hotel are analyzed. By the analysis of conclusion, basic current situation of rooms in theme hotels is given. The findings of this research will provide a reference to design the guest's room of the themed hotel.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.766-777
• /
• 2018

In this paper, a sliding mode and proportional plus integral (SM-PI) control combined with self-sustained phase shift modulation (SSPSM) for LLC resonant converters is presented. The proposed control scheme improves the transient response while preserving good steady-state performance. An averaged large signal model of an LLC converter with the ZVS modulation technique is developed for the SM control design. The sliding surface is obtained based on the input-output linearization concept. A system identification method is adopted to obtain the transform function of the LLC resonant converter, which is used to design the PI control. In order to reduce the inherent chattering problem in the steady state, the combined SM-PI control strategy is derived with fuzzy control, where the SM control is responsive during the transient state while the PI control prevails in the steady state. The combination of SSPSM and the SM-PI control provides ZVS operation, robustness and a fast transient response against step load variations. Simulation and experimental results validate the theoretical analysis and the attractive features of the proposed scheme.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권7호
• /
• pp.453-462
• /
• 2020

The research postulates the conceptualization of talent in the Vietnamese banking sector via examining the factors pertaining to the concept of talent and talent management (TM) in the sector. This study applied qualitative research methods. A total of 20 managers and directors of ten banks (three public, four private and three foreign banks) were recruited for semi-structured interviews. The findings revealed that a combination of interconnected soft skills, learning ability, flexibility, technology adaptability, integrity and risk management skills contributes to talent identification. Managers in some private banks construed talent to be commensurate with high performance and high potential, whereas managers in public banks and foreign banks mainly relied on performance results in talent recognition. Moreover, talented employees holding sales-related jobs are given the most attention by management in the studied banks. Regarding practical implications, the banking community and practitioners' focus should be imparted to soft skills development and integrity control in order to foster employee performance and attitudes. Attention should be paid not only to sales positions, but also to other positions within the bank. This study is one of a few which explores talent concepts and TM approaches in the banking sector in general and Vietnamese banking field in particular.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.199-200
• /
• 2012

An experimental study on geometric optimization was conducted to develop a hybrid/dual swirl jet combustor for a micro-gas turbine. A hybrid concept indicating a combination of swirling jet partially premixed and premixed flames were adopted to achieve high flame stability as well as clean combustion. Location of pilot nozzle, angle and direction of swirl vane were varied as main parameters with a constant fuel flow rate for each nozzle. The results showed that the variation in location of pilot nozzle resulted in significant change in swirl intensity due to the change in flow area near burner exit, and thus, optimized nozzle location was determined on the basis of CO and NOx emissions under conditions of co-swirl flow and swirl $angle=30^{\circ}$. The increase in swirl angle (from $30^{\circ}$ to $45^{\circ}$) enhanced the emission performances, in particular, with a significant reduction of CO emission near lean-flammability limit. It was observed that the CO emission near lean-flammability limit was further reduced through the counter-swirl flow. However, there was not significant change in the NOx emission in the operating conditions (i.e. equivalence ratio of 0.6~0.7) between the co- and the counter-swirl flow.

• 디지털산업정보학회논문지
• /
• 제12권4호
• /
• pp.81-87
• /
• 2016

Recently, as the heterogeneous network (HetNet) has been deployed widely to support various kinds of Radio Access Networks(RANs) with a combination of Macro, Pico, and/or Femto cells, research and standardization efforts have been very active regarding the concept of Licensed Shared Access (LSA) for supporting spectrum sharing. In order for a mobile device to efficiently support the spectrum sharing, the mobile device shall be reconfigurable, meaning that its radio application code has to be adaptively changed in accordance with the hopping of desired spectral band. Especially, Working Group 2 (WG2) of Technical Committee (TC) Reconfigurable Radio System (RRS) of European Telecommunications Standards Institute (ETSI) has been a main driving force for developing standard architecture for Multi-mode Mobile Device (MD) that can be applied to the LSA system. In this paper, we introduce the Multi-mode MD architecture for supporting LSA-based spectrum sharing. An implementation of a test-bed of Multi-mode MD is presented in order to verify the feasibility of the standard MD architecture for the purpose of LSA-based spectrum sharing through various experimental tests.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 춘계학술대회 논문집
• /
• pp.158-163
• /
• 2008

In inverse synthetic aperture radar (ISAR) imaging, An ISAR autofocusing algorithm is essential to obtain well-focused ISAR images. Traditional methods have relied on the approximation that the phase error due to target motion is a function of the cross-range dimension only. However, in the stepped-frequency radar system, it tends to become a two-dimensional function of both down-range and cross-range, especially when target's movement is very fast and the pulse repetition frequency (PRF) is low. In order to remove the phase error along down-range, this paper proposes a method called SAEM (subarray averaging and entropy minimization) [1] that uses a subarray averaging concept in conjunction with the entropy cost function in order to find target motion parameters, and a novel 2-D optimization technique with the inherent properties of the proposed entropy-based cost function. A well-focused ISAR image can be obtained from the combination of the proposed method and a traditional autofocus algorithm that removes the phase error along the cross-range dimension. The effectiveness of this method is illustrated and analyzed with simulated targets comprised of point scatters.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권4호
• /
• pp.301-327
• /
• 2019

The proper orthogonal decomposition (POD) method for time-dependent problems significantly reduces the computational time as it reduces the original problem to the lower dimensional space. Even a higher degree of reduction can be reached if the solution is smooth in space and time. However, if the solution is discontinuous and the discontinuity is parameterized e.g. with time, the POD approximations are not accurate in the reduced space due to the lack of ability to represent the discontinuous solution as a finite linear combination of smooth bases. In this paper, we propose to post-process the sample solutions and re-initialize the POD approximations to deal with discontinuous solutions and provide accurate approximations while the computational time is reduced. For the post-processing, we use the Gegenbauer reconstruction method. Then we regularize the Gegenbauer reconstruction for the construction of POD bases. With the constructed POD bases, we solve the given PDE in the reduced space. For the POD approximation, we re-initialize the POD solution so that the post-processed sample solution is used as the initial condition at each sampling time. As a proof-of-concept, we solve both one-dimensional linear and nonlinear hyperbolic problems. The numerical results show that the proposed method is efficient and accurate.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2004년도 정기총회 및 학술대회
• /
• pp.43-46
• /
• 2004

MPEG-21 is an on-progress project of the Moving Picture Expert Group (MPEG) that has been started in many independent parts such as part for standardizing the declaration of a digital item (MPEG-21 Part 2: Digital Item Declaration), right expression language (MPEG-21 Part S: Rights Expression Language), way to process the digital item (MPEG-21 Part 10: Digital Item Processing), etc. All this part is intended to form a framework to enable transparent and augmented use of multimedia resources across a wide range of networks and devices (1). In this paper, we show our research initiative to develop a web-based application that utilized many parts of MPEG-21 technology. The implemented concept uses a digital item and license providers in the server side while the MPEG-21 Conformant application is implemented as a plug-in application that will be downloaded to the user terminal when user accesses the webpage for the frist time. The result of this research shows that with some combination of MPEG-21 parts, we can develop an authorized multimedia delivery and consumption application.