• Journal of the Korean Society of Radiology
• /
• v.4 no.4
• /
• pp.5-10
• /
• 2010

The $Ca_2SiO_4$ phosphors doped by La with 0.1 wt%, 0.3 wt%, 0.5 wt%, and 1.0 wt% concentration were prepared by sintering at $1000^{\circ}C$ for 90 minutes in N2 atmosphere. The phosphors were ground in powdered form and were grouped in $100{\mu}m$ size, then the samples had been exposed to low energy X-ray and UV light. The TL glow curves were measured by heating the phosphors at $10^{\circ}C/s$ rate. There was no significantly meaningful correlation between the TL intensity and the doping level. The intensities of the TL peak measured from X-ray irradiated samples doped with 0.1 wt% were relatively strong. The activation energy and the frequency factor were 0.434 ~ 0.516 eV and 0.5 ~ 0.56, respectively. The intensities of the TL peak measured from UV irradiated samples doped with 0.3 wt% were relatively strong. The activation energy and frequency factor were 0.415 ~ 0.477 eV and 0.5 ~ 0.53, respectively. The TL process were found to be the 2nd order for both X-ray and UV irradiation. The TL intensity was increased linearly with the increase of the radiation dose. In summary, the $Ca_2SiO_4 phosphors developed in this study showed good TL characteristics at low energy X-ray and UV light. We believe they will be used as TLDs in near future for personal and environmental radiation detection dosimetry.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.64-70
• /
• 2011

Portable artificial electronic nose (E-nose) system suffers from noisy fluctuation in surroundings such as temperature, vapor concentration, and gas flow, because its measuring condition is not controled precisely as in the laboratory. It is important to develop a simple and robust vapor recognition technique applicable to this uncontrolled measurement, especially for the portable measuring and diagnostic system which are expanding its area with the improvements in micro bio sensor technology. This study used a PDA-based portable E-nose to collect the uncontrolled vapor measurement signals, and applied the image matching algorithm developed in the previous study on the measured signal to verify its robustness and improved accuracy in portable vapor recognition. The results showed not only its consistent performance under noisy fluctuation in the portable measurement signal, but also an advanced recognition accuracy for 2 similar vapor species which have been hard to discriminate with the conventional maximum sensitivity feature extraction method. The proposed method can be easily applied to the data processing of the ubiquitous sensor network (USN) which are usually exposed to various operating conditions. Furthermore, it will greatly help to realize portable medical diagnostic and environment monitoring system with its robust performance and high accuracy.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.3
• /
• pp.101-112
• /
• 2007

Hard disks have been the most prevalent secondary storage devices and these days their usage is becoming more important in mobile computing systems due to I/O intensive applications such as multimedia applications and games. However, significant power consumption in the disk drives still limits battery lifetimes of mobile systems critically. In this paper, we show that using several smaller disks (instead of one large disk) can be an energy-efficient secondary storage solution on typical mobile platforms without a significant performance delay. Also, we propose a novel energy-efficient technique, which clusters related data into groups and migrates the correlated groups to the same disk. We compare this method with the existing data concentration scheme, and also combine them. The experiments show that our technique saves the energy consumption up to 34% when a pair of 1.8' disks is used instead of a single 2.5' disk with a negligible increase in the average response time. The results also show that our method also saves up to 14.8% of disk energy consumption and improve the average I/O response time by up to 10 times over the existing scheme.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.279-298
• /
• 2019

This study comprehensively addresses recent progress at KAERI in waste treatment technology to cope with waste produced by pyroprocessing, which is used to effectively manage spent fuel. The goal of pyroprocessing waste treatment is to reduce final waste volume, fabricate durable waste forms suitable for disposal, and ensure safe packaging and storage. KAERI employs grouping of fission products recovered from process streams and immobilizes them in separate waste forms, resulting in product recycling and waste volume minimization. Novel aspects of KAERI approach include high temperature treatment of spent oxide fuel for the fabrication of feed materials for the oxide reduction process, and fission product concentration or separation from LiCl or LiCl-KCl salt streams for salt recycling and higher fission-product loading in the final waste form. Based on laboratory-scale tests, an engineering-scale process test is in progress to obtain information on the performance of scale-up processes at KAERI.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.9
• /
• pp.5-14
• /
• 2024

In Korea, torrential rain frequency and intensity have surged over the past five years (2019-2023), breaking rainfall records. Due to insufficient observation facilities for rainfall and runoff data in small mountainous catchments, preparing for unexpected floods is challenging. This study examines the Bidogyo catchment in Goesan-gun, Chungcheongbuk-do, comparing design flood discharge calculated with optimized parameters versus standard guidelines. Using HEC-HMS and Q-GIS for model construction, five rainfall events were analyzed with data from the National Water Resources Management Information System. The time of concentration (Tc) and storage constant (K) were calculated using the Seokyeongdae formula and model optimization. Results showed that optimized parameters produced higher objective function values for flood events. The design flood discharge varied by -10.7% to 17.3% from the standard guidelines when using optimized parameters. Moreover, optimized parameters yielded flood discharges closer to observed values, highlighting limitations of the Seokyeongdae formula for all catchments. Further research aims to develop suitable parameter estimation methods for small mountainous catchments in Korea.

• Environmental and Resource Economics Review
• /
• v.28 no.1
• /
• pp.121-145
• /
• 2019

This paper investigates the relationship between the oil price and the major petroleum products prices at the trading hubs such as Singapore, North West Europe and the US New York Harbor. We focus on the lead-lag relationship between the weekly petroleum prices from 2009 to 2016 based on the vector error correction model. We find that the oil price leads the prices of petroleum products in the long term, while there is bidirectional causality in the short term. On the other hand, prices of petroleum products in regions with high import dependency, such as Europe gas oil and jet fuel price, are exogenous in the long term. We also present evidence that prices of petroleum products in region with a large global-market share lead prices in other regions. However, if the region is in an over-production situation and low industry concentration, it may lose its price leadership due to intense competition. The result in this study can provide a useful information to petroleum refining companies in forecasting fluctuations of product price, and hence in planning their regional arbitrage trading activities.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.1-6
• /
• 2022

As the demand for wearable devices increases, many studies have been studied on the development of flexible electrode materials recently. In particular, the development of high-performance flexible electrode materials is very important for wearable sensors for healthcare because it is necessary to continuously monitor and accurately detect body information such as body temperature, heart rate, blood glucose, and oxygen concentration in real time. In this study, we fabricated the nonenzymatic glucose sensor based on polyaniline/carbon nanotube fiber (PANI/CNT fiber) electrode. PANI layer was synthesized on the flexible CNT fiber electrode through electrochemical polymerization process in order to improve the performance of a flexible CNT fiber based electrode material. Surface morphology of the PANI/CNT fiber electrode was observed by scanning electron microscopy. And its electrochemical characteristics were investigated by chronoamperometry, cyclic voltammetry, electrochemical impedance spectroscopy. Compared to bare CNT fiber electrode, this PANI/CNT fiber electrode exhibited small electron transfer resistance, low peak separation potential and large surface area, resulting in enhanced sensing properties for glucose such as wide linear range (0.024~0.39 and 1.56~50 mM), high sensitivity (52.91 and 2.24 ㎂/mM·cm²), low detection limit (2 μM) and good selectivity. Therefore, it is expected that it will be possible to develop high performance CNT fiber based flexible electrode materials using various nanomaterials.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.11
• /
• pp.779-788
• /
• 2013

With a wide dissemination of smartphones, the number of native applications developed and sold freely by anyone is growing now. The application market activated by Apple's App Store is spreading more rapidly with Google's Google Play. But due to platform-dependent of native application's attribute, developers are programming at each platform. As a result, development cost is increasing compared to earnings. To solve a dependency problem, people focused on web application developed by web-based language. However, stores at each browser are requiring a web application to follow manifest format. And this causes browser-dependent problem. Those problems can be solved by installing a certain browser, but this can make an application useless on the other browser of a store. Dependency problem can narrow not only user's application variation, but also concentration on some specific store. OWS(Open Web Store) is a standard store that supports various web environments. It overcomes browser or platform dependency problems by interworking applications between stores. Also customers are able to choose a large number of applications. In this paper, related to OWS, I would like to suggest manifest standards and store's reference architecture. An interworking scenario is going to be proposed as well.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.438-447
• /
• 2012

The objectives of this research are: to provide fundamental data for tourism policy and investigate medical tourism attributes by IPA(Importance-Performance Analysis) to attract Japanese medical tourists to Korea. Utilizing Japanese medical tourists as subjects of inquiry, this study evaluated the importance of medical tourism selection attributes and the rate at which these attributes were performed. Consequently, this study deduced 'convenience, service quality, differentiation, approximation' factors by factor analysis as well as the ranking among each selection attributes using T-test. The importance-performance analysis showed 'Concentrate Here' in quadrant I, 'Keep up the Good Work' in quadrant II, 'Low Priority' in quadrant III and 'Possible Overkill' in quadrant IV. The results show that "Concentrate Here" part in quadrant I is reservation procedure rapidity and information system simplicity. This means that these attributes are very important but they indicate low performance. Thus, concentration among tourism managers should be focused along these attributes. The study, then, suggests that employee who speaks Japanese fluently should be arranged during reservation procedure. Furthermore, Japanese class should become mandatory during basic employee training to improve reservation procedure rapidity. Moreover, clinic websites should concentrate on accessibility of Japanese users in such a way that they can consult their needs on line. Finally, managers should find diverse ways to bring about good service rapidly and conveniently.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.