• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.643-653
• /
• 2013

In this study, trend analysis was performed by various runoff analysis method of Non-point Pollution Source(NPS) at the impervious area. The characteristics of rainfall at impervious area appeared to be influenced by rainfall strength and it appeared that first flush phenomenon occurs often if rainfall strength acts largely. It is judged that the measure is required to be prepared against that now that concentration difference of non-point pollution source appeared to be big by precedent number of days of no rainfall. As the result of calculating Decrease Rate (DR) by first flush of non-point pollution source, it is judged that it is important to prepare the measure against the pollutants about initial rain and it is necessary to calculate the capacity of non-point pollution source processing facilities regarding that now that the non-point pollution source integrated at impervious area showed the characteristics that are flowed out in high concentration by initial rain in case of non-rainfall considering the characteristics of non-point pollution source at impervious area. When taking 50% of non-point pollution source as the standard for decrease rate that was evaluated previously, it appeared as 15~60 min in case of TSS and it appeared as 30~90 min in case of organic compound, but the characteristic whose decrease rate is below 50% also appeared even till rainfall-runoff ends. Based on that, it is judged that it could be used as the reference when designing the structural BMPs facilities later.

• Korean Journal of Clinical Laboratory Science
• /
• v.39 no.1
• /
• pp.31-36
• /
• 2007

The purpose of the clinically reportable range (CRR) in clinical chemistry is to estimate linearity in working range. The reportable range includes all results that may be reliably reported, and embraces two types of ranges: the analytical measurement range (AMR) is the range of analyte values that a method can directly measure on the specimen without any dilution, concentration, or other pretreatment not part of the usual assay process. CAP and JCAHO require linearity on analyzers every six months. The clinically reportable range is the range of analyte values that a method can measure, allowing for specimen dilution, concentration, or other pretreatment used to extend the direct analytical measurement range. The AMR cannot exceed the manufacturer's limits. Establishing AMR is easily accomplished with Calibration Verification Assessment and experimental Linearity. For example: The manufacturer states that the limits of the AST on their instrument are 0-1100. The lowest level that could be verified is 2. The upper level is 1241. The verified AMR of the instrument is 2-1241. The lower limit of the range is 2, because that is the lowest level that could be verified by the laboratory. The laboratory could not use the manufacturer's lower limit of 2 because they have not proven that the instrument values below 2 are valid. The upper limit of the range is 1241, because although the lab has shown that the instrument is linear to 1241, the manufacturer does not make that claim. The laboratory needs to demonstrate the accuracy and precision of the analyzer, as well the validation of the patient AMR. Linearity requirements have been eliminated from the CLIA regulations and from the CAP inspection criteria, however, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. If a lab chooses to continue linearity studies, these studies must fully comply with the calibration/calibration verification requirements of CLIA and/or CAP. The results of lower limit and upper limit of clinically reportable range were total protein (2.1 - 79.9), albumin (1.3 - 39), total bilirubin (0.2 - 106.2), alkaline phosphatase (13 - 6928.2), aspartate aminotransferase (24 - 7446), alanine aminotransferase (13 - 6724.2), gamma glutamyl transpeptidase (16.64 - 9904.2), creatine kinase (15.26 - 4723.8), lactate dehydrogenase (127.66 - 13231.8), creatinine (0.4 - 129.6), blood urea nitrogen (8.67 - 925.8), uric acid (1.6 - 151.2), total cholesterol (48.52 - 3162), triglycerides (36.91 - 3367.8), glucose (31 - 4218), amylase (21 - 6694.2), calcium (3.1 - 118.2), inorganic phosphorus (1.11 - 108), HDL (11.74 - 666), NA (58.3 - 1800), K (1.0 - 69.6), CL (38 - 1230).

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.46-51
• /
• 2015

BACKGROUND: This study aimed at investigating the effects of sulfur-containing compounds widely used as environment-friendly organic fungicides against ginseng anthracnose, and determining the appropriate application concentration for lowering chemical injury to ginseng leaves. Ginseng anthracnose, caused by Colletotrichum gloeosporioides, is a destructive disease that significantly reduces the yield of ginseng. METHODS AND RESULTS: Ginseng anthracnose, caused by Colletotrichum gloeosporioides, is a destructive disease that significantly reduces the yield of ginseng. In a 2-year-old ginseng grown in a pot, treatment with loess-sulfur complex containing 0.06% sulfur and fermented loess-sulfur complex containing 0.13% sulfur did not show any chemical injuries. In order to measure the therapeutic effectiveness, various sulfur-containing compounds were applied to the plants after they were infected with ginseng anthracnose. Treatment with lime sulfur complex (400 dilution) showed the highest ginseng anthracnose control value, followed by fermented loess-sulfur complex (20 dilution), fermented loess-sulfur complex (40 dilution), and loess-sulfur complex (400 dilution) treatments. These compounds were applied before the outbreak of anthracnose disease in order to measure the preventive effectiveness, and in this case, treatment with fermented loess-sulfur complex (40 dilution) showed the highest control value and it was comparable to the value of the pesticide treatment used as the control in this experiment. CONCLUSION: Fermented loess-sulfur complex could be recommended as an environment-friendly organic material to control the occurrence of ginseng anthracnose.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.272-277
• /
• 2018

Background: Studying the ecosystem carbon cycle requires analysis of interrelationships between soil respiration (Rs) and the environment to evaluate the balance. Various methods and instruments have been used to measure Rs. The closed chamber method, which is currently widely used to determine Rs, creates a closed space on the soil surface, measures $CO_2$ concentration in the inner space, and calculates Rs from the increase. Accordingly, the method is divided into automatic or manual chamber methods (ACM and MCM, respectively). However, errors of these methods and differences in instruments are unclear. Therefore, we evaluated the characteristics and difference of Rs values calculated using both methods with actual data. Results: Both methods determined seasonal variation patterns of Rs, reflecting overall changes in soil temperature (Ts). ACM clearly showed detailed changes in Rs, but MCM did not, because such small changes are unknown as Rs values are collected monthly. Additionally, Rs measured using MCM was higher than that using ACM and differed depending on measured plots, but showed similar tendencies with all measurement times and plots. Contrastingly, MCM Rs values in August for plot 4 were very high compared with ACM Rs values because of soil disturbances that easily occur during MCM measurements. Comparing Rs values calculated using monthly means with those calculated using MCM, the ACM calculated values for monthly averages were higher or lower than those of similar measurement times using the MCM. The difference between the ACM and MCM was attributed to greater or lesser differences. These Rs values estimated the carbon released into the atmosphere during measurement periods to be approximately 57% higher with MCM than with ACM, at 5.1 and $7.9C\;ton\;ha^{-1}$, respectively. Conclusion: ACM calculated average values based on various Rs values as high and low for measurement periods, but the MCM produced only specific values for measurement times as representative values. Therefore, MCM may exhibit large errors in selection differences during Rs measurements. Therefore, to reduce this error using MCM, the time and frequency of measurement should be set to obtain Rs under various environmental conditions. Contrastingly, the MCM measurement is obtained during $CO_2$ evaluation in the soil owing to soil disturbance caused by measuring equipment, so close attention should be paid to measurements. This is because the measurement process is disturbed by high $CO_2$ soil concentration, and even small soil disturbances could release high levels into the chamber, causing large Rs errors. Therefore, the MCM should be adequately mastered before using the device to measure Rs.

• Korean Journal of Poultry Science
• /
• v.46 no.1
• /
• pp.39-46
• /
• 2019

This study was conducted to investigate the effect of dietary bee venom on serum characteristics, antioxidant activity, and hepatic fatty acid composition in broiler chickens. A group of 875 one-day-old feather-sexed male broiler chicks were randomly allocated to five treatments with seven replicates (25 birds/replicate) for three weeks. A corn-soybean meal-based diet was used as the basal diet. Five dietary treatments were compared: 1) basal diet, 2) basal diet containing $10{\mu}g/kg$ of bee venom powder, 3) basal diet containing $50{\mu}g/kg$ of bee venom powder, 4) basal diet containing $100{\mu}g/kg$ of bee venom powder, and 5) basal diet containing $500{\mu}g/kg$ of bee venom powder. At 21 days, one bird per pen was slaughtered by asphyxiation in $CO_2$ gas, and blood was collected to measure serum characteristics and antioxidant activity. In addition, the liver was excised to measure the concentration of malondialdehyde and determine fatty acid composition. Increasing dietary bee venom in the diet failed to affect most serum parameters except for triglyceride and non-esterified fatty acids. Dietary bee venom inclusion quadratically increased the concentration of stearic acid (P<0.05), but decreased palmitoleic acid, oleic acid, linoleic acid, mono-unsaturated fatty acids, and poly-unsaturated fatty acids. Finally, dietary bee venom tended to lower hepatic malondialdehyde contents quadratically (P=0.054). In conclusion, our study revealed that dietary bee venom improved antioxidant capacity and affected fatty acid metabolism in broiler chickens.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.70-79
• /
• 2018

This study would suggest a measure for the improvement of the commentary program on the building concentration area of Changdeokgung Palace. In the process of the survey, the researcher attended the commentary site and tape-recorded commentaries two times. The researcher conducted an analysis of the times and contents of the tape-recorded commentaries and evaluated their appropriateness, including historicity and connectivity to the site. In addition, the researcher figured out the commentaries and the visitors' movements through drawings and field surveys and analyzed the locations and conditions of the main facilities. Through a field survey and analysis, it was found out that the commentaries included the facts and anecdotes about the buildings, the related figures and history. However, it was found out that there were very insufficient commentaries on the buildings arranged according to the commentary movements, the outside space, in particular, the traditional landscape facilities. In addition, it was found out that there are areas that would need commentaries and opening for viewing. A proposal for the improvement of the commentary program was drawn up based on the analysis. New commentary points were added, and the commentaries of the outside space of the area and the traditional landscape facilities could improve through modifying the existing commentaries. With the proposal for improvement, the time required was calculated through reading aloud at a speed the same as the existing commentary speed. Through this, it was found out that the proposal for improvement could be implemented within one hour, the same as the present commentary program. This study has a significance that it provided a measure for practical improvement that could provide the visitors with quality commentary information and more interesting experience.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2017

SS(Suspended Solid) concentration by soil erosion into river at normal and flood season should be measured. However, to present the variation of SS due to various development project such as EIA(Environmental Impact Assessment), River Master Plan, and so on, it is necessary to estimate not measure SS, but there are not exist how to estimate SS. In the present study, therefore, we propose the hydrologic method of estimating SS concentration using the results of particular frequency flood discharge and sediment discharge by RUSLE method. SS consists of silty and clay soil and colloid particle etc. However, in the present study, silty and clay soils of sediment discharge except send set up SS standards. The flow discharge to estimate SS concentration are 1~2 years for normal season, 30~100 years for flood season. Meanwhile, analysis software for probable rainfall uses Fard2006, probable rainfalls under 2-year frequency are estimated using rainfall data and frequency factor of Gumbel distribution. The results of estimating SS concentration using runoff volume by sediment and flow discharges of silty and cray soils as above method show that reliable level of SS concentration is considered in predevelopment of natural condition and under development of barren condition. Especially, SS concentration takes notice that the value of sediment discharge makes a huge difference according to channel slope, it was confirmed that the value obtained by dividing the SS concentration by the channel slope is relatively constant even though the topographical factors are different. Therefore, if the present study will be proceeded for various watersheds, it will be developed as estimation method of SS concentration.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.308-317
• /
• 2015

This study attempted to identify the possibility of natural herbal extracts as an alternative, preventive agent of caries by comparing antimicrobial activities between natural herbal extracts and mouth rinsing solutions against Streptococcus mutans. Natural herbal plants were extracted with distilled water and ethanol, respectively, to measure the minimum growth inhibitory concentration of S. mutans depending on concentration, and among which, solvents showing high antimicrobial activity were selected to compare their antibiotic effects with those of mouth rinsing solutions. Also, to determine the concentration of natural medicinal herbs that can be used safely in the oral cavity, the extracts were treated to the normal gingival fibroblast cells depending on concentration in order to determine its cytotoxicity using MTT. In terms of the minimum growth inhibition concentration, the growth inhibition of S. mutans was more excellent in the ethanol extract than in the distilled water. When the minimum growth inhibition concentration was compared, Psoralea corylifolia of natural herbal ethanol extracts, and Hexamedine (Bukwang Pharm., Korea) of mouth rinsing solutions inhibited growth of S. mutans at the lowest concentration. When the minimum bactericidal concentration was compared, P. corylifolia of natural herbal extracts, and Hexamedine and Garglin (Dong-A Pharm., Korea) of mouth rinsing solutions eliminated S. mutans at a low concentration. The human gingival fibroblast was treated with natural herbal ethanol extracts at the minimum growth inhibition concentration of 10, 39, and $78{\mu}g/ml$. As the result, no cytotoxicity was found. When this was treated at different minimum bactericidal concentrations, natural herbal ethanol extracts showed cytotoxicity except P. corylifolia.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.67-72
• /
• 2013

The flash point is the lowest temperature at which there is enough concentration of flammable vapor to form an ignitable mixture with air. The flash point is a major physical property used to analyse the fire and explosion hazards of a flammable liquid solution. The flash point data for pure components are easily available in several literature. But the flash points of the flammable binary solutions appear to be scarce in the literature. The objective of this study is to measure and estimate the flash point of acetic acid-formic acid system. Cleveland open cup tester was used to measure the flash point. The experimental data were compared with the values estimated by the Raoult's law and the optimization methods based on van Laar and Wilson equations. As a result, the estmated values by optimization methods were found to be better than those based on the Raoult's law.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.29-43
• /
• 2006

Highway ARS service made several times handling of cellular phone for accept the one information. But, use the cellular phone while driving is against the law that 'Road Traffic Act' and wield influence on safety by degrade driver's attention that causes reduced section of concentration. On this study, propose a new type service that more useful and safer witch improved of existing ARS service to it served for cellular phone. For the analyze problem in existing ARS service, collect and analysis that ARS using status data and highway overall speed data, and then offer a better service type which based on improvements to that. Also, make a comparative analysis including measure of degree about easy to use and safety between two services by using the Stated Preference method, as a result of verifies the effect of new type service Finally, for measure of the effect the value of improved ARS service type that used willingness to pay in CVM method.