• The Journal of Korean Academy of Prosthodontics
• /
• v.9 no.1
• /
• pp.41-45
• /
• 1969

A major disadvantage of Dental cements is their solubility. So it is very important to measure the exact amount of solubility to select clinically suitable materials. The most common laboratory test for solubility is the measurement of disintegration in distilled water, as outlined in A.D.A. Specifications 8 and 9, In addition to the possible factors influencing the solubility, the experiments were all conducted in compliance with A.D.A. Specifications. The solubility of 2 Zinc Phosphate cements and 1 Silicate cement in time of dissolution, concentration of solute in dissolving medium, and type of dissolving medium were investigated. The following results were obtained. 1. Generally the materials were more soluble in organic acids than in distilled water. 2. The dissolution cements tends be minimized by tests utilizing prolonged storage in the same media. 3. In Acetic acid solution, Zinc Phosphate cements were more soluble than Silicate cement, and in Citric acid solution both were markedly more soluble. 4. Solubility was increased by continually presenting fresh liquid, unsaturated with solute, to the cement-water interface.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.211-215
• /
• 2020

Currently, most of the chlorine dioxide gas is processed at the beginning of storage or distribution. It has the disadvantage of not being able to continuously process gas since there is no system that can continuously process it during the distribution process. Therefore, in order to minimize changes in freshness and quality during the distribution process of agrifood, there is a need for a sustained-release chlorine dioxide gas treatment technology that can be continuously released. Therefore, in this study, the film to be used was examined so that the chlorine dioxide gas can be continuously released for a certain period of time, the concentration of the reactant and the viscosity at the time of the reaction were determined, and a chlorine dioxide gas gel pack was manufactured using this optimal condition. In addition, the gel pack was used to measure the amount of chlorine dioxide gas released and the sterilization effect of food poisoning bacteria.

• Journal of Environmental Science International
• /
• v.21 no.11
• /
• pp.1333-1338
• /
• 2012

In order to measure the minute amount of Cu(II) in our environment, cyclic voltammetry (CV) and square-wave stripping voltammetry (SWSV) were performed for a trace copper assay using bismuth immobilized on a carbon nanotube paste electrode. An analytical working range of 30 to $240{\mu}g/L$ Cu(II) was obtained for CV and SWSV. The SWSV precision obtained was 0.47 % (n = 15) RSD in $30.0{\mu}g/L$ Cu(II). The detection limit obtained was 3.1 ng/L Cu(II) using SWSV, while the CV yielded the nano-range detection limit through the pre-concentration step. By using this research method, Cu(II) value could be determined in the urine of human sample and in the brain of fish sample. This research can be effectively applied to other cases of measuring minute amount of Cu(II) in living organisms.

• 연구논문집
• /
• s.29
• /
• pp.49-55
• /
• 1999

Heat release rate used to characterize the fire is an important factor for determining the fire size, the fire growth and the time for suppression and evacuation. The purpose of present work is to review theoretical backgrounds and to introduce equations for estimation of heat release rate with oxygen consumption method in fires. Our work also shows the experimental results of applications for liquid fuels. The oxygen concentration is measured by the analyzer of paramagnetic type. The analyzers of Infra-Red type are used to measure the concentrations of $CO_2$ and CO gas. Time delays of analyzers are ignored.

• Korean Journal of Child Studies
• /
• v.34 no.4
• /
• pp.125-141
• /
• 2013

The following study to enhance children's creativity in the context of diverse cultures and ethnic groups, and utilizes various programs from different countries aimed at 5 year old children with the Nuri framework. The study also seeks to measure pre and post play behaviors, creativity levels, and thinking capabilities of the children, then compare these results with those from a control group. Analysis of the results indicates that children who experienced programs from various countries through a multicultural approach had much higher levels of fluency, adaptability, originality, and imaginative capabilities than children who had not experienced such programs. Among the children's creative play behaviors, intrinsic motive-magination, sensitivity-curiosity, longetivity-concentration, various forms of interest-challenge, and leadership-independence were all found to be significantly higher.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.106-112
• /
• 2009

An optical sensing membrane has been fabricated to measure the concentration of dissolved oxygen(DO) and pH value simultaneously. It has employed HPTS as a pH sensitive dye and a ruthenium(II) complex as a DO sensitive dye. The sensing membrane has been applied to wells in a 24-well microtiter plate. Using the 24-well microtiter plate the concentrations of dissolved oxygen and pH values have been on-line monitored during the cultivations of E.coli DH5${\alpha}$, B.cereus 318 and P.pastoris X-33. On-line monitoring of DO and pH in microorganism cultivation processes showed good performance of the sensing membrane containing 5 mM HPTS and 2 or 5 mg/mL Rudpp.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.232-237
• /
• 2005

In this paper, we fabricated $CO_2$ gas sensor based on the MEMS infrared sensor and characterized its electrical and $CO_2$-sensing properties. The fabricated $CO_2$ gas sensor by MEMS technique has many advanges over NDIR(nondispersive) $CO_2$ sensor such as monolithic fabrication, very high selectivity on $CO_2$, low power consumption and compact system. Microbolometer by surface micromachining was fabricated for gas detector and $CO_2$ filter chip by bulk micromachining was fabricated for signal referencing. By using the proposed and fabricated gas sensor, we are expected to measure $CO_2$ concentration more accurately with high reliability.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.1
• /
• pp.7-19
• /
• 1981

Anodization method is utilized in order to measure diffusion profiles of boron and arsenic in silicon. The solution used for silicon anodization is Ethylene glycol +KNO3(0.04N), The thickness of silicon which is consumed by a single 200V anodization is 460$\pm$40A regardless of wafer type. The profiles of boron and arsenic in silicon after predeposition process are investigated. The diffusion coefficients of both dopants depending on impurity concentration are extrated from these profiles. The base pull-in effect has been observed in prototype npn transistors with arsenic doped emitter.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.90-93
• /
• 2004

Micro PIV was applied to measure velocity profiles of two-fluid flows in a microchannel. In this work, the two-fluid flow of two glycerol-water mixtures was measured for three cases $(\phi=0\;and\;\phi=0.2;\;\phi=0.1\;and\;\phi=0.5;\;\phi=0\;and\;\phi=0.6)$. The flow rates of two fluids were the same. The experimental velocity profiles agreed well with numerical simulations. However, a slight deviation was found in the fluid with low concentration. Rather than the effects of the varying refractive indices inside the channel, the high velocity gradient effect was thought as the main source of the deviation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.830-839
• /
• 1991

The correlation between electrical (derivativer) characteristics and electro-optical conversion characteristics of laser diodes has been investigated both theoretically and experimentally with emphasis on the nonideal behavior. Laser diodes are electrically pumped devices with the current resulting from the carrier recombination dynamics, and their junction voltage is given by the separation of the quasi-Fermi levels which are determined by the injected carrier concentration. Thus most of the informaiton related to laser diode operation characteristics is reveraled in the electrical characteristics which are relatively simple to measure with sufficient accuracy. Therefore the measurement of electrical characteristics and their derivatives is a very useful tool of laser diode characteristion.