• Membrane Journal
• /
• v.27 no.2
• /
• pp.138-146
• /
• 2017

The new types of phenoxy-carboxylatophenoxy cosubstituted polyphosphazene were synthesized with various substitution rates. Diabetic diagnostic membranes were prepapared with these types of polyphosphazenes and final absorbances at 680 nm through these membranes were measured at various concentrations of glucose in blood. Basically, the end-point results of varying absorbance values according to time (K/S) had a linear relationship to the glucose concentration. The effects of substitution rates with hydrophilic carboxylatophenoxy groups and hydrophobic phenoxy groups on the glucose concentration measurements were examined. It was very difficult to measure glucose concentration in less than 10% of the hydrophilic substitution rates, because the glucose penetration rate was too slow. But dose-response slope (DRS) values between glucose concentration and K/S values increased as the hydrophilic substitution rates increased in more than 10% of the hydrophilic substitution rates. However, in more than 30% of the hydrophilic substitution rates, DRS value was too rapidly increased, because glucose penetration rate was too fast.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.477-488
• /
• 1996

The purposes of this study were to measure the solubility of the stannous fluoride experimentally, to find a method for improving the solubility of the stannous fluoride, and to observe the effect of longterm storage on the variation of the concentration of fluoride in the stannous fluoride solutions. By adding such materials as antiseptics, dye, flavor, and tastes to solution, the variation of the fluoride concentration was also observed. Ten groups of 0.4% stannous fluoride solutions to which glycerine, sodium chloride, chlorhexidine, dye, flavor, xylitol, and sorbitol were added were prepared. The measurements were carried out by direct calibration. The obtained results were as follows. 1. Effect of adding glycerine as solvent. : The solubility of stannous fluoride increased in the case of adding glycerine. By increasing the glycerine concentration, the fluoride level in stannous fluoride solution also increased. 2. Effect of adding sodium chloride and chlorhexidine. : Comparing to the case of pure water, low fluoride level was measured in case of adding sodium chloride and high fluoride level was measured in case of adding chlorhexidine. 3. Effect of adding erythrosin as dye and banna essence as flavor. : Adding erythrosin and banna essence didn't affect fluoride level. 4. Effect of adding xylitol and sorbitol. : The effects of xylitol and sorbitol were nearly the same as the effect of adding erythrosin and banna essence.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.379-384
• /
• 2012

It is investigated that that the physical properties of Glutathione layer formed on gold surfaces may make an effect on the distribution of either gold particle adsorbed to the $TiO_2$ surface or vice versa with the adjustment of the electrostatic interactions. For the investigation, the atomic force microscope (AFM) was used to measure the surface forces between the surfaces as a function of the salt concentration and pH value. With the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, the forces were quantitatively analyzed to acquire the surface potential and charge density of the surfaces for each salt concentration and each pH value. The surface potential and charge density dependence on the salt concentration was described with the law of mass action, and the pH dependence was explained with the ionizable groups on the surface. The salt concentration dependence of the surface properties, found from the measurement at pH 8 and 11, was consistent with the prediction from the law. It was found that the Glutathione layer had higher values for the surface charge densities and potentials than the titanium dioxide surfaces at pH 8 and 11, which may be attributed to the ionized-functional-groups of the Glutathione layer.

• Clean Technology
• /
• v.20 no.2
• /
• pp.130-135
• /
• 2014

It is investigated that the surface properties of mercaptopyruvic-acid layer formed on gold surfaces may make an effect on the distribution of either gold particle adsorbed to the zirconia surface or vice versa. For the investigation, the atomic force microscope was used to measure the surface forces between the surfaces as a function of the salt concentration and pH value. The forces were quantitatively analyzed with the derjaguin-landau-verwey-overbeek (DLVO) theory to estimate the electrostatic properties, potential and charge density, of the surfaces for each condition of salt concentration and pH value. The estimatedvalue dependence on the salt concentration was explained with the law of mass action, and the pH dependence was interpreted with the ionizable groups on the surface. The salt concentration dependence of the surface properties, found from the measurement at pH 4 and 8, was predictable from the law. It was found that the mercaptopyruvic-acid layer had higher values for the surface charge densities and potentials than the zirconia surfaces at pH 4 and 8, which may be attributed to the ionizedfunctional-groups of the mercaptopyruvic-acid layer.

• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.2
• /
• pp.155-161
• /
• 1995

The present investigation has been undertaken to elucidate the differentiation mechanism the uterus which is the environment of the embryo development, by demonstrating the role of ovarian steroids hormone in the decidualization of the pseudopregnant rat uterus. To determine the effect of ovarine steroids and artificial stimulation (trauma) on the differenciation of the uterine endometrium and decidualization for implantation, attempt was made to measure concentrations of serum estradiol($E_2$), progesterone($P_4$) and nuclear $P_4$ receptor in the traumatized and non-traumatized uterine tissue of the pseudopregnant rat. The results obtained are as followings : The concentration of serum $E_2$ on day 9(implantation stage) was similar in both of intact pseudopregnant rat(47.63pg/ml) and normal pregnant rat(40.71pg/ml). And among the treated groups, $E_2$ concentration was highest in the $E_2$ treated group in comparision with intact control group(relative value; 73.27%). The concentration of serum $P_4$ was also highest in the $P_4$ treated group(23.12pg/ml). Relative value of $P_4$ treated group in comparision with intact group(24.88pg/ml) was 92.93%. The nuclear $P_4$ receptor levels in the artificial traumatized groups were higher compared with the non-traumatized control groups. This study, therefore, clearly demonstrates that the methods for inducing pseudopregnant (vagina tapping;120/min) and inducing decidualization(oil injection; 0.1ml/uterine horn) appear to be effective, $P_4$ appears to be effective in the differenciation of the uterine endometrial tissue for the implantation process. Concentration of serum $P_4$ seems to be well correlated with the level of the nuclear $P_4$ receptor during the early embryo development. These results seem to be well correlated with ALPase activities in the normal and pseudopregnant rat uterus shown in the previous study.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.378-383
• /
• 2008

In December 2006, the Ministry of Environment Republic of Korea established the guideline which is "Indoor Air Quality Management Guidelines in Public Transportation." as control items, $CO_2$ (carbon dioxide) and PM10 (particle matter) are classified two categories, that is, Level 1 (non-rush hour), Level 2 (rush hour). Therefore, the quality of air in train and subway should be controlled in accordance with the guideline. We took a measure the air freshness inside train twice at Line 4 (Tangogae-Oido), in Sep. 2007 and at Line 1 (Dongincheon-Yongsan) in Nov. 2007, respectively and, also expected the emitted $CO_2$ concentration by using a property of matter such as EMU (Electric Multiple Unit) design reviewing specification and air. According to the measured values, the concentration of PM10 was 44, 57, 45% and the concentration of $CO_2$ was 39, 36, 44% respectively, all measured values are within the guideline and also, as a result we found the expected value and measured value are similar.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.6
• /
• pp.289-297
• /
• 2018

Objectives: Obesity is a considerable and growing public health concern worldwide. The present study aimed to quantify socioeconomic inequalities in adult obesity in western Iran. Methods: A total of 10 086 participants, aged 35-65 years, from the Ravansar Non-communicable Disease Cohort Study (2014-2016) were included in the study to examine socioeconomic inequalities in obesity. We defined obesity as a body mass index ${\geq}30kg/m^2$. The concentration index and concentration curve were used to illustrate and measure wealth-related inequality in obesity. Additionally, we decomposed the concentration index to identify factors that explained wealth-related inequality in obesity. Results: Overall, the prevalence of obesity in the total sample was 26.7%. The concentration index of obesity was 0.04; indicating that obesity was more concentrated among the rich (p<0.001). Decomposition analysis indicated that wealth, place of residence, and marital status were the main contributors to the observed inequality in obesity. Conclusions: Socioeconomic-related inequalities in obesity among adults warrant more attention. Policies should be designed to reduce both the prevalence of obesity and inequalities in obesity by focusing on those with higher socioeconomic status, urban residents, and married individuals.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.4 no.2
• /
• pp.80-84
• /
• 2018

$[^{13}N]$Ammonia or $[^{13}N]NH_3$ is one of the most widely used PET tracer for the measurement of MBF. To produce $[^{13}N]NH_3$, devarda's alloy which contains aluminum, copper and zinc is used for the purpose of reduction from $^{13}N$-nitrate/nitrite to $[^{13}N]NH_3$. Since aluminum has neurotoxicity and renal toxicity, the amount of it should be carefully limited for the administration to the human body. Although USP and EP provide a way to identify the aluminum ion concentration, there are some difficulties to perform. Therefore, we tried to develop the modified method for verifying aluminum concentration of test solution. We compared color between test and standard solutions using chrome azurol S in pH 4.6 acetate buffer. We also tested color change of test and standard solutions according to pH, amounts and the order of reagent and time difference These results demonstrated that the color change of the solution can reflect quantitatively measure aluminum ion concentration. We hope the method is to be used effectively and practically in many sites where $[^{13}N]NH_3$ is produced.

• Journal of Biomedical Engineering Research
• /
• v.43 no.1
• /
• pp.27-34
• /
• 2022

Drunk driving defines a driver as unable to drive a vehicle safely due to drinking. To crack down on drunk driving, alcohol concentration evaluates through breathing and crack down on drinking using S-shaped courses. A method for assessing drunk driving without using BAC or BrAC is measurement via biosignal. Depending on the individual specificity of drinking, alcohol evaluation studies through various biosignals need to be conducted. In this study, we measure biosignals that are related to alcohol concentration, predict BrAC through SVM, and verify the effectiveness of the S-shaped course. Participants were 8 men who have a driving license. Subjects conducted a d2 test and a scenario evaluation of driving an S-shaped course when they attained BrAC's certain criteria. We utilized SVR to predict BrAC via biosignals. Statistical analysis used a one-way Anova test. Depending on the amount of drinking, there was a tendency to increase pupil size, HR, normLF, skin conductivity, body temperature, SE, and speed, while normHF tended to decrease. There was no apparent change in the respiratory rate and TN-E. The result of the D2 test tended to increase from 0.03% and decrease from 0.08%. Measured biosignals have enabled BrAC predictions using SVR models to obtain high Figs in primary and secondary cross-validations. In this study, we were able to predict BrAC through changes in biosignals and SVMs depending on alcohol concentration and verified the effectiveness of the S-shaped course drinking control method.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.81-92
• /
• 2021

Purpose: The aim of the study is to measure the quality of cardiopulmonary resuscitation (CPR) and the fatigue of rescuers wearing PPE (Level D) during a CPR session and to ultimately provide suggestions of safety standards for rescuers. Methods: 36 subjects were enrolled in the study. The subjects were divided randomly into three groups of two-members, three-members, and four-members. Each group performed CPR for 30 minutes. Blood lactate concentration, heart rate, rating of perceived exertion, chest compression depth and rate were measured before experiment and after each cycle. Results: There was a difference in the blood lactate concentration during CPR cycle by member of shifts (p=.014). The blood lactate concentration increased during CPR (p=.000). Subjective fatigue was a significant difference of chest compression in cycles 3, 4, and 5 for the member of shifts during CPR (p=.049, p=.009, p=.015). Depth and rate of chest compression were not different for the member of shifts during CPR. Conclusion: It is necessary to establish standards for the member of shifts during CPR, to reduce the fatigue of rescuers.