• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.837-846
• /
• 1999

There were few reports about the fluoride concentration in bone and osteoporotic women. This study was designed to evaluate the relationship between the urinary fluoride concentration and periodontal condition in osteoporotic old women. Twentyeight postmenopausal women(Test group) and twenty-one premenopausal women(Control group) were examined. Bone mineral density(BMD) of lumbar spine(L2-L4) was measured by dual energy X-ray absorptiometry(DEXA). The urine samples were collected at early morning and determined with the help of a fluoride-specific electrode and Tisabbufferd samples. The results were as follows. 1. The mean urinary fluoride concentration in test and control group showed statistically no difference. 2. The bone mineral density(BMD) of the spine in test group was significantly lower than control group(p<0.05). 3. The significant negative correlation was found between BMD level and age after menopause $(p<0.001,\;{\gamma}=-0.526$. 4. The urinary fluoride concentration was not correlated with age, age after menopause and bone mineral density. 5. The urinary fluoride concentration was not correlated with periodontal condition.

• International Journal of Automotive Technology
• /
• v.7 no.4
• /
• pp.385-390
• /
• 2006

A fast response $CO_2$ analyzer has been developed to study transient characteristics on an SI engine. The analyzer has the delay time of 4.5 ms and time constant of 2.8 ms, which is fast enough to measure $CO_2$ concentration on a transient condition. Wide range of A/F(Air/Fuel) ratio can be estimated using the analyzer with an additional switch type oxygen sensor. The results of measurement of $CO_2$ concentration and A/F ratio on a transient condition including rapid acceleration/deceleration and EGR(Ehxaust Gas Recirculation) on/off are presented and compared with a commercial exhaust gas analyzer and UEGO(Universial Exhaust Gas Oxyzen) sensor.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.347-349
• /
• 2009

Air quality of indoor space environment is affected by various pollutants like as particles and chemical stuffs. The indoor air pollution affects directly the human respiration organs to cause consequently unpleasant mental status. The $CO_2$ concentration level is one of the harmful components of air pollutants. Major factor to increase the $CO_2$ concentration level is the people's breath amount in indoor. The car exhaust gas diffused from the around road also has strong affect on $CO_2$ concentration. There are some other reasons to affect the $CO_2$ concentration change, such as, real-time change of the population movement, closeness to the indoor air flow inlet window and changes in road car traffic amount. A remote monitoring system to measure environmental indoor air pollution concerning on the $CO_2$ concentration was studied and installed realized set-up model. Zigbee network configuration was applied for this system and the $CO_2$ concentration data were collected through USN network. A software program was developed to assure systematic analysis and to display real-time data on web pages. For the experimental test various condition was set up, like as, window opening, stopping air condition operation and adjusting fan heater work, etc. The analysis result showed the relation of various environmental conditions to $CO_2$ concentration changes. The causes to increase $CO_2$ concentration were experimentally defined as windows closing, the stopping air condition system, fan heater operation. To keep the $CO_2$ concentration under the legally required ppm level in public access indoor space, the developed remote measurement system will be usefully applied.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.190-200
• /
• 2002

This study was carried out to investigate and analyze TSP of the PC rooms. The concentration of the total suspended particulate and heavy metals contained in the total suspended particulate of the 15 PC rooms located in one local city were measured. The statistical correlation coefficients between the total suspended particulate and factors of the indoor condition (number of fan or size of pc room, illumination), between the heavy metals and factors of the indoor condition were studied. The results are as follows: 1. The factors of the indoor condition of the 15 PC rooms are as follows. Average illumination was 24 luxes. Average number of computers installed were 37. Average number of the fans was 7. and the size of investigated PC rooms was $139.94m^2$. 2. The mean age of the subjects was 21.8 years old. they $(51.5\%)$ used the 15 pc rooms for fewer than 2 hours per one day. 3. The mean concentration of total suspended particulate (TSP) is lower in the evening ${139.085\;(2.462)\;{\mu}g/m^3}$ than the night ${166.216(2.609){\mu}g/m^3}$. 4. The mean concentration of total suspended particulate was industrial work area) residential area) commercial area. 5. The distribution of heavy metals were indicated as Zn>Cr>Pb>Cd in the indoor air at PC rooms. and the concentration rate of Zn was the highest among heavy metals. but this increase didn't show any relationship with many factors of indoor condition (number of fan or size of pc room, lighting) 6. The concentration of TSP & heavy metals didn't have any relationship between the factors of indoor environment (number of fans, size of pc room, lighting).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.4
• /
• pp.41-49
• /
• 2023

This study examined the effect of input substrate concentration on hydrogen production of microbial electrolysis cells. To compare the performance of MEC according to the input substrate concentration, six laboratory-scale MEC reactors were operated by sequentially increasing the input substrate concentration from 2 g/L of sodium acetate, to 4 g/L, and 6 g/L. The current density, hydrogen production, and SCOD removal rate were analyzed, and energy efficiency and cathodic hydrogen recovery were calculated to compare the performance of MEC. The maximum volumetric current density was obtained at 4 g/L condition (76.3 A/m³) and it decreased to 19.0 A/m³, when the input concentration was increased to 6 g/L, which was a 75% decrease compared to the 4 g/L input condition. Maximum hydrogen production was obtained also at 4 g/L condition (47.3 ± 16.8 mL), but maximum hydrogen yield was obtained at 2 g/L input condition (1.1 L H₂/g COD_in). Energy efficiencies were also highest in 2 g/L condition; the lowest result was observed at 6 g/L condition. Maximum electrical energy efficiency was 76.4%, and the maximum overall energy efficiency was 39.7% at 2 g/L condition. However, when the substrate concentration increased to 6 g/L, the performance was drastically decreased. Cathodic hydrogen recovery also showed a similar tendency with energy efficiency, with the lowest concentration condition showing the best performance. It can be concluded that operating at low input substrate concentration might be better when considering not only hydrogen yield but also energy efficiency.

• Journal of Environmental Science International
• /
• v.5 no.4
• /
• pp.453-462
• /
• 1996

This study was conducted to evaluate the level of atmospheric heavy metals and the relationship of that concentration with weather conditions. This research monitored the concentration of Total Suspended Particulates (TSP) at every three hours by using High Volume Air Sampler from December 24th, of 1995 to Febuary 20th, 1996 in Kimhae area, which recently became a rapidly growing residential and industrial sitc. The items such as air-temperature, relative humidity, radition, wind speed, and wind direction were monitored by using Atmospheric Weather System at the same time. From the collected TSP, the concentration of heavy metals were analyzed by using the Atomic Absorption Spcetrophotometry. The mean concentration of TSP was 110.4 $\mu\textrm{g}$/$m^3$, and the mean concentration of lead (Pb), copper(Cu), chromium (Cr), manganese (Mn), cadmium (Cd), were 0.837 $\mu\textrm{g}$/$m^3$, 0486 $\mu\textrm{g}$/$m^3$, 0.264$\mu\textrm{g}$/$m^3$). The concentration of Pb and Mn was higher in the moring and that of Cu, Cr and Cd was higher in the afternoon and the evening. Regarding the relationship between the concentration of pollutants and weather condition, the-concentration TSP revealed positive correlation with temperature, humidity, wind speed, but negative correlation with tradition (p<0.01). The concentration of Mn revealed positive correlation with temperature and humidity, but negative correlation with wind speed (p<0.01). And the the concentration of pollutants and weather condition revealed higher correlation within the same time period. In summary, the paralleled mornitoring of air conditions and weather condition should be recommended to. get the correct informations concerning the pollution and to prevent the deterioration of air conditions.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.131-135
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) in shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were performed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67g/ L in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 460rpm : 0.28 : 6%. On the other hand BC yield was 0.42g/g in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 564rpm : 0.21 : 2%. The BC production could be enhanced up to more than 65.3% by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.02g/L in the optimum condition

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.3
• /
• pp.137-146
• /
• 2007

CFD simulation is a very useful tool to predict the concentration of contaminant generated from the building materials in a single room. However, there is a limitation on analyzing air movement and contaminant concentration in a multi-room when the door of each room is closed. In this study, network based simulation was coupled with contaminant simulation for the multi-room condition, using an network simulation tool 'ESP-r'. The coupled simulation was first validated with experimental measurements which performed to define the characteristics of the analyzed space prior to the simulation, and indoor air flow and contaminant concentration between rooms were then analyzed when the door of each room was open and closed in the case of natural and forced ventilation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.177-190
• /
• 1998

The concentrations of air pollutants In large cities such as Pusan area have been increased every year due to the increasing of fuels consumption at factories and by vehicles as well as the gravitation of the population. In addition to the pollution sources, time and spatial variation of air pollutants concentration and meteorological factors have a great influence on the air pollution problem. Especially , its concentration is governed by wind direction, wind speed, precipitation, solar radiation, temperature, humidity and cloud amounts, etc. In this study, we have analyzed various data of meteorological factors using typical patterns of the air pressure to investigate how the concentration of air pollutants is varied with meteorological condition. Using the relationship between meteorological factors (air temperature, relative humidity, wind speed and solar radiation) and the concentration of air pollutants (SO2, O3) , experimental prediction formulas for their concentration were obtained. Therefore, these prediction formulas at each meteorological factor in a pressure pattern may be roughly used to predict the air pollutants concentration and contributed to estimate the variation of its value according to the weather condition in Pusan city.

• Journal of the East Asian Society of Dietary Life
• /
• v.4 no.3
• /
• pp.147-169
• /
• 1994

This study was conducted to ivestigate the quality of modeled chinese-cabbage Kimchi. The mutual action of sub-ingredients and optimum mixing conditions were examined by analyses of pH, acidity, content of vitamins, carotenes, number of total microorganism, and Lactobacilli, the activities of softening related to enzymes (polygalacturonase and ${\beta}$-galactosidase), and sensory quality during fermentation. The result about the mutual action of red pepler powder and garlic showed that the pH was decresed as concentration of garlic was higher and that of red peppler powder became lower. Kimchi had unpleasant taste and undesirable odor when the adding ratio of the peper powder and garlic was unbalanced. As the concentration of garlic became higher, the content of vitamin C in Kimchi tissue decreased while that of vitamin C in Kimchi juice increased. The contents of vitamin B1, B2 and carotene increased as the concentration of garlic became lower. The optimum mixing ratio of red pepper powder and garlic evaluated by overall eating quality was 4.66% and 3.45%, respectively. The result about the mutual action of ginger and green onion was that pH became higher as the concentration of ginger was 1.84% and that of green onion was 5.96%. The intensity of fresh taste and odor became stronger as the concentration of ginger increaed to 2.76% and that of green onion decreased to 2.98%. The balance of sour, salty and hot taste became better as the concentration of ginger increased and that of green onion decreased. The optimum mixing condition evaluated by overall eating quality was 2.94% in ginger ＋ 2.78% in green onion. The contents of vitamin B1, B2 and C were high in this condition. The result about the mutual action of leek and salted anchovy juice was that pH became lower as the concentration of leek increased and that of salted anchovy juice decreased. Sour, hot and sweet tastes were good in the condition of leek 12%, salted anchovy juice 4.69%. Palatable, fresh taste and odor became weaker when the one of both sub-ingredients was too much little. The optimum mixing condition evaluated by overall easting quality was 9.76% in leek ＋ 7.32% in salted anchovy juice. The contents of vitamin B1, B2, C and carotene were high in this condition and other sensory qualities were good. The result about the mutual action of salt and sugar was that pH became lower as the concentration of sugar became higher and that of salt became lower. The sweet taste was reduced of hot taste than salty taste. Palatable and fresh tastes were desirable when Kimchi fermented with less salt and more sugar. The optimum mixing condition evaluated by overall eating quality was 3.29% in sugar ＋ 4.80% in salt. The contents of vitamin B1, B1, C and carotene were high in this condition. The result of model Kimchi fermented at 20$^{\circ}C$ was that the number of Lactobacilli in model Kimchi was higher than that of in control Kimchi. The fermentation period was extended under pH 4.0 and the contents of vitamin B1, B1,C and carotene were high through the whole edible period. The activity of polygalacturonase was low, but that of ${\beta}$-galactosidase was high during fermentation.