• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.658-663
• /
• 2015

In the previous work, we have proposed an integrate-and-fire neuron circuit and synaptic device based on the floating body MOSFET [1-3]. Integrate-and-Fire(I&F) neuron circuit emulates the biological neuron characteristics such as integration, threshold triggering, output generation, refractory period using floating body MOSFET. The synaptic device has short-term and long-term memory in a single silicon device. In this paper, we connect the neuron circuit and the synaptic device using current mirror circuit for summation of post synaptic pulses. We emulate spike-timing-dependent-plasticity (STDP) characteristics of the synapse using feedback voltage without controller or clock. Using memory device in the logic circuit, we can emulate biological synapse and neuron with a small number of devices.

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.143-152
• /
• 2022

The ongoing adoption of 5G will increase the data traffic, throughput, multimedia services, and power consumption for future wireless applications and services, including sensor and mobile networks. Multipath fading on wireless channels also reduces the system performance and increases energy consumption. To address these issues, device-to-device (D2D) and cooperative communications have been proposed. In this study, we propose two inter-clustering models using the relay selection method to improve system performance and increase energy efficiency in cooperative D2D networks. We develop two inter-clustering models and present their respective algorithms. Subsequently, we run a computer simulation to evaluate each model's outage probability (OP) performance, throughput, and energy efficiency. The simulation results show that inter-clustering model II has the lowest OP, highest throughput, and highest energy efficiency compared with inter-clustering model I and the conventional inter-clustering-based multirelay method. These results demonstrate that inter-clustering model II is well-suited for use in 5G overlay D2D and cellular communications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1034-1037
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of 0.3$cm^2$/V.sec and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of 0.3Cd/$m^2$.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.395-396
• /
• 2008

There is difficulty in predicting the program efficiency of NOR type nonvolatile memory device adopting channel hot electron injection (CHEI) as program operation mechanism accurately since MOSFET on SOI has floating body. In this study, the dependence of program efficiency for SOI nonvolatile memory device of 200 nm channel length on SOI depletion conditions, partial depletion and full depletion, was quantitatively investigated with the aid of numerical device simulation [1].

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.384-384
• /
• 2012

PRAM switching device by using current pulse modulation was investigated to verify its possibility for 3D architecture. In this work, two phase change materials connected in series having a different crystallization temperature are used. Its structural for different phase change material was evaluated by electrical resistance. We confirmed that Germanium-Antimony-Tellurium (GST) alloy and Germanium- Copper-Tellurium (GCT) alloy material were selected according to crystallization temperature, ${\sim}180^{\circ}C$ for switching and ${\sim}240^{\circ}C$ for memory devices, respectively. From this research, it is expected that phase change switching device could have advantages of process in terms of material similarity and structural simplification.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.455-459
• /
• 2007

본 논문에서는 정형기법을 이용한 리눅스 디바이스 드라이버 개발에 대한 내용을 다룬다. Device Driver 는 Reactive system에 속하는 대표적인 경우이다. 또한 Reactive system을 효과적으로 명세하고 검증하기 위한 정형기법 도구로 SCADE가 있다. 본 논문에서는 SCADE를 이용하여 실제 Linux device driver중 하나를 설정하여 이를 그 툴로 명세하고 검증한 후 구현한 후 발생한 여러 문제점을 통하여 실제 정형기법이 Linux device driver에 개발에 사용될 수 있는지를 논의한다.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.103-109
• /
• 2019

Recently, as the number of families raising dogs has increased, cases of lost dogs have frequently occurred. According to US statistics, 5% of the total dogs are reported to be alive, with only 18% reporting to their owners. Therefore, a device for preventing the loss of dogs is needed, and the demand for the market is rapidly growing. Therefore, it is necessary to develop a lost device for dogs. In this paper, we developed a loss prevention device that combines low-power broadband wireless communication technology, LoRa communication method, and GPS positioning technology. The result of this study is expected to prevent the loss of dogs. It is also expected that social problems will reduce the problem of lost dogs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.897-899
• /
• 2016

In recent years, BLE technology has received extensive attention and has been applied to all aspects of life. The existing BLE device has two methods, one is the connection method, and the other is a non-connection method. The representative profile of the connection method is the proximity file. The most typical example of Non-connection method BLE device is a beacon. However, they are both independent and have their own shortcomings. Connection method device can provide service for only one user, others can't use. Security performance of Non-connection method BLE device is poor and the device can't be controlled by the user. In this paper, a combination-mode BLE device profile design scheme is presented, which combines with the previous two methods, and solves the defaults. And We define a dual purpose advertising package that can be used in a normal environment as well as in a disaster environment. Finally, a unidirectional Control idea is proposed. Through performance evaluation, we found that the device has strong stability and low power consumption.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.9
• /
• pp.107-112
• /
• 2018

Smart livestock has been proposed as a solution to increase farmers' income and new recruitment of livestock farmers. In this paper, a standardization Plan of breeding management device and collected information for smart livestock cattle was proposed. l Sophisticatedly, basic information will be established for all six types of livestock breeding management device: military automatic feeder, calf automatic feeder, smart milk cooler, feed bin to be able to measure feed residue, smart scale, and biometric information collection device. The standardization, common use, and stabilization of major livestock management device and collected information were suggested to solve the problems caused by in existing breeding management device.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.971-974
• /
• 2005

In this paper, we describe photonic sensor interface in SOPC(System on a programmable chip) platform. This platform uses device that has ARM922T processor and APEX FPGA area on a chip. We use two development kits. The one is embedded kit that using Intel's Xscale device, the another is SOPC kit that using Altera's Excalibur device. We implement some device logic that DMAC, ADCC, etc. and application.