• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.142-151
• /
• 2013

This study develops an automation system for metallic mold design that is applicable in forging non-axial symmetric parts. The metallic mold design program is used to design the metallic mold using two-dimensional axial symmetric metallic molds and to predict the stress concentration using finite element analyses. Then, the program redesigns the metallic mold using variables such as the optimal split diameter, maximum allowable inner pressure, fit tolerance, and stress distribution, which are calculated using the metallic mold design program. When the involute spur gear is forged, stress concentration occurs on the tooth root bounded at the symmetric surface. The SCM4 material is suitable for metallic molds because the stress is less than the yield strength of the insert and it acts on the tooth root regardless of the inner pressure. The metallic mold for forging non-axial symmetric parts can be designed through adjusting the magnitude of the contact pressure. The program developed in this study can be applied to metallic mold designs in involute spur gears of forging, which is an ordinary non-axial symmetric part.

• Journal of Korean Academy of Nursing Administration
• /
• v.2 no.2
• /
• pp.43-57
• /
• 1996

The purpose of this research conducted has been an the development of a computer program to be used for nursing of spinal cord injury patients. The research is also intended to contribute by supplying the basic data, to the development of other programs in relevant areas where similar nursing information system is required. This research used System Development Life Cycle method. Results from the study were as follows : The scope of Information System in nursing practice were based on a wide range of mateials as charts at four hospitals in Pusan that cover the nursing period of spinal cord injury patients from admission to discharge and other sources of reference, the research is done for nursing diagnosis, nursing history, admission and discharge education, and the performing of doctor's order, which were divided into a subsystem that consisted of help, Patient Management, Performing of Docter's Order, and Basic Data Management and then these was analysed systematically using Hierachy Plus Input Process Output, necessary information, data flow diagram, and conceptual designs were developed for chosem system. Furthemore, the system has been programed by a conceptual design that includes the objects of the program and the origins of the sources. The oder to make sure of the proper function, the computer program was actually applied to a nursing practice that had been developed for a hypothetical situation through the two nurses who were in charge of spinal cord injury patients after they were trained to understand the structure and the contents of computer program about the nursing practice from using the computer program developed. Also, the compensatory strategy has been worked out against any problems to arise. It is expected that this kind of nursing practice information system to be used for the spinal cord injury patients that has been developed through the processes shown above will increase the satisfaction for both patients and nurses by enabling them to give more professional advice and service to the development of more information systems for many hospitals.

• Journal of Fashion Business
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2008

Today is a 'high concept' era in which consumers make sensible consumption that shares a sensible bond with a brand. Therefore, it is important to analyze consumers' aesthetic awareness; namely, fashion feeling in the fashion industry. This study conducted research into a fashion design planning process according to a fashion feeling focusing on computer graphics suited to the 21st century digital trend. First, the study classified a fashion feeling with eight senses including elegance, classic, modern, mannish, sporty, avant-garde, ethnic, and romantic feelings. Second, the study made an image map, color map, material map, and style map with Adobe Photoshop CS3 by dividing a fashion planning process with a computer graphics program. Also, the study made a flat illustration with Adobe Illustrator CS3. Third, the study proposed the image map, color map, material map, style map, fashion illustration and flat illustration in the design planning process under the theme of the aforementioned eight fashion feelings.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.11-19
• /
• 2002

This study described computer aided die design system for cold forging of non-axisymmetric parts such as gears and splines. To design the cold forging die, an integrated approach based on a rule-base system and commercial F. E. code were adopted. This system is implemented on the personal computer and its environment is a commercial CAD package named as Auto CAD. The system includes four modules. In the initial data input module, variables which are necessary to design of die are inputted by user and die material are selected from the database according to the variables. In the analysis and redesign module, stress distribution acting on the designed die is analyzed by commercial FEM code NISA II with elastic mode. If die failure predicted, the designed die would modified in four ways to prevent die failure in both states of stress free and pressurizing. The developed system provides useful date and powerful capabilities for die design of non-axisymmetric parts.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.33-41
• /
• 2010

This study was aimed at the design of the dies for the unified pipe joint of the intermediate shaft using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.331-336
• /
• 2012

This study was aimed at the design of the dies for the guide valve for the fuel pressure regulator using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'Eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.582-588
• /
• 2011

This study was aimed at the design of the dies for the unified shaft joint using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'Eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.245-250
• /
• 2018

Ab Image Processing can be applied to the various fields nowadays. The healthcare, which people may have interest, is one of those fields. The healthcare program which fitness equipments are used requires the correct posture of body. However, people usually does exercise by oneself with various reasons such as cost to hiring personal trainer. In this case, the effectiveness of training should not be guaranteed. Moreover, reverse effect may be produced. This paper is an implementing a correcting posture program by using image processing techniques, which people can use exercise training by oneself. It is expected that people can have a personal trainer who coaches the correct postur through this program.

• The Journal of Korean Association of Computer Education
• /
• v.12 no.6
• /
• pp.1-9
• /
• 2009

Programming learning may help to enhance learners' complex problem solving abilities. However, it may cause excessive cognitive loads for learners. Therefore, selection of programming tools and design of teaching and learning strategies to minimize the learners' cognitive loads and to maximize the learning effects. A task centered Scratch programming learning program was developed to enhance problem solving abilities of middle school students. And then, we implemented the developed program in middle school programming classes and analysed the educational effects of the developed program. We found that the developed program was helpful in enhancing learners' problem solving abilities, especially in the element of 'troubleshooting', which explains ability of error detecting and correcting.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.152-167
• /
• 2001

Recently safety systems for the commercial vehicle have been rapidly developed. However, we still have many problems in the vehicle stability and the braking performance. Especially, a commercial vehicle may meet a dangerous braking condition when the vehicle is lightly loaded or empty and when the road is wet or slippery. Under these conditions, the truck can spin out or the tractor can jackknife or the trailer can swing out. To design the air brake system for the commercial vehicle, since the air brake system has many design variables, there must have been intensive researches on a method how to prevent dynamic instability and how to maximize the vehicle deceleration. In this study, mathematical models about the tractor-semitrailer and the air brake system including an ABS controller have been constructed for computer simulation. Also, simple examples are applied to show the usefulness of the program. Designers can use this simulation program for understanding the braking characteristics such as trajectory, braking distance, longitudinal deceleration, lateral deceleration, and yaw rate on various road conditions.