• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.47-54
• /
• 2010

We propose a smart human-computer interface replacing conventional mouse interface. The interface is able to control cursor and command action with only hand performing without object. Four finger motions(left click, right click, hold, drag) for command action are enough to express all mouse function. Also we materialize cursor movement control using image processing. The measure what we use for inference is entropy of EMG signal, gaussian modeling and maximum likelihood estimation. In image processing for cursor control, we use color recognition to get the center point of finger tip from marker, and map the point onto cursor. Accuracy of finger movement inference is over 95% and cursor control works naturally without delay. we materialize whole system to check its performance and utility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.183-190
• /
• 2008

The balanced Tx diversity with same data on two antennas can have better or lower performance than STBC Tx diversity, depending on the difference between each phase of two channels when the received signal is processed with MRRC. Therefore, using the feedback information based on the phase estimation in each channels, the better scheme of the balanced Tx diversity and STBC Tx diversity can be selected. However, when the phase condition changes during the transmission as the selected Tx. diversity scheme, the decoded bit can be erroneous because the previously estimated phase and newly estimated phase is different. In this case, the receiver should request the re-transmission of the just received signal to the transmitter part. Through computer simulation, it is shown that the combined scheme of the balanced Tx diversity and STBC Tx. diversity has better performance than STBC Tx diversity.

• The KIPS Transactions:PartB
• /
• v.18B no.4
• /
• pp.193-200
• /
• 2011

This paper proposes a low-cost visual analyzer algorithm of human body motion for real-time applications such as human-computer interfacing, virtual reality applications in medicine and telemonitoring of patients. To reduce cost of its use, we design the algorithm to use a single camera. To make the proposed system to be used more conveniently, we avoid from using optical markers. To make the proposed algorithm be convenient for real-time applications, we design it to have a closed-form with high accuracy. To design a closed-form algorithm, we propose an idea that formulates motion of a human body joint as a 2D universal joint model instead of a common 3D spherical joint model, without any kins of approximation. To make the closed-form algorithm has high accuracy, we formulates the estimation process to be an optimization problem. Thus-desined algorithm is applied to each joint of the human body one after another. Through experiments we show that human body motion capturing can be performed in an efficient and robust manner by using our algorithm.

• Journal of Radiation Protection and Research
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2003

The periodic safety review of operational nuclear power plants requires that the plants should keep a well organized environmental monitoring program. The past records of environment monitoring data were analyzed. and the tritium concentrations of the samples in the surface and ground water around Kori site were measured. It was shown that the tritium concentrations around the Kori site were slightly higher than that of natural background. The change of background tritium concentration was estimated through a numerical modeling. Two different versions of 7 compartments model - the world and the northern hemisphere - defined in NCRP-62 were modeled for the global tritium cycling. The numerical solution of the model was obtained using a computer program, AMBER. The four cases of tritium source-terms into the atmosphere were considered. The results showed that the tritium concentration in the surface soil water was higher than that in sea water or surface stream water. Also, it was shown that the tritium produced by the interaction between cosmic rays and the gases were the major source of tritium, and the tritium produced by nuclear weapon test decreased considerably.

• Journal of the Korea Convergence Society
• /
• v.11 no.3
• /
• pp.37-43
• /
• 2020

Smartphone-based localization has been widely studied in many different scenarios. But as far as we know, few work has addressed the problem of localization in underground public transportation systems, where GPS signal and wireless infrastructure are not always available. Knowing the location of a train is necessary to develop a useful service for subway passengers. And so, estimation of motion state and stop station by using sensors on a smartphone is being studied for subway passengers. This paper proposes a localization method that uses a barometer and a magnetic sensor on a smartphone. The method proposed in this paper first estimates whether the train runs or stops according to the change in air pressure and the strength of the magnetic field. The altitude value and the magnetic field value are then used to estimate the exact stop station of the train. We evaluated the proposed method using data from the Seoul's subway line 5. Compared with previous methods, the proposed method achieves higher accuracy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.108-121
• /
• 1986

In this paper, the development of a simulator for the performance estimation and parameter optimization of an integrates voice/data packet communication network is described. The simulator implemented is capable of simulating the integrated voice/data network that handles packet voice terminals as well as data terminals and hosts operating under standard CCITT protocols. Of the three descrete event simulation approaches presently known, the process interaction method has been chose. With this approach one can implement a simulator that is related most Closely with the real system. The simulator has been implemented in PL/I and GPSS simulation languages, resulting in a software package of about 4,000 lines. To reduce the computer run time of the simulator, we have used a method of reducing conditional events based on a GPSS LINK block. We describe various aspects of the simulation model developed. We then investigate the performance of a 7-node network using the simulator, and present the results. For validation of the simulator developed, we construct a simulation model for a simple voice/ data multiplexer, and compare the results of simulation with those of an analytical model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.291-303
• /
• 2006

In this paper, we analyze functional requirements of the IEEE 802.22 WRAN, and propose a downlink 프레임 structure satisfying the requirements. The proposed downlink 프레임 structure maximizes e transmission efficiency by adopting the cognative radio to assign the sub-channel by reflecting the channel environment of WRAN. We also calculate the signalling overhead for both downlink and uplink, and analyze the performances of time synchronization, frequency synchronization and cell identification based on the 프리앰블 in downlink and suggest the channel estimation method tough 프리앰블 or pilot. As a final result, e stationary beamforming (SBF) algorithm with dynamic channel allocation(DCA) is proposed. The proposed OFDMA downlink 프레임 structure with channel adaptive sub-channel allocation for cognitive radio applications is verified to meet the requirements of IEEE 802.22 WRAN, by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.51-60
• /
• 2005

In this paper, we propose an enhanced SIR measurement algorithm for WCDMA mobile station modem. The proposed algorithm minimizes processing delay by applying velocity estimation-based channel estimator with IIR filter and reduces measured SIR offset by compensating attenuated signal power by using pilot channel(CPICH) in fading channel environment. To improve stability of SIR measurement, we also adopt an IIR filter which can properly reflect variation of fading channel in signal and interference power measurement. We prove that the proposed algorithm outperforms conventional SIR measurement algorithm in mean and jitter of measured SIR. Computer simulation shows that performance results using the proposed algorithm have improvement of approximately 8dB for measured mean and 2dB for measured jitter in the wireless mobile channel, especially in fast mobile speed environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.614-619
• /
• 2014

In WSN (Wireless Sensor Networks) based surveillance system, it needs to know the occurrence of events or objects and their locations, because the data have no meaning without location information. Using traditional 2D localization mechanisms provide good accuracy where altitude is fixed. But the mapping the position estimated by 2D localization to the real world can cause an error. Even though 3D localization mechanisms provide better accuracy than 2D localization, they need four reference nodes at least and high processing overhead. In our surveillance system, it is needed to estimate the height of the detected object in order to determine if the object is human. In this paper, we propose a height estimation mechanism which does not require many reference nodes and high complexity. Finally, we verify the performance of our proposed mechanism through various experiments.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.543-548
• /
• 2002

It has been known that the DCMP(Directionally Constrained Minimization of Power) and the ZF(Zero Forcing) can improve the SINR performance of an array antenna system by using spatial signature of wireless channel. This paper analyzes the performance of DCMP and ZF in multiple scattering environments. To obtain the spatial signature of wireless channel. both DOA(Directional of Arrival) and AS(Angular spread) of the received signals were estimated by using ESPRIT. The performance of the DCMP and the ZF was analyzed theoretically. By computer simulation of SINR performance was evaluated.