• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.129-135
• /
• 1995

This study aims to compare the heat release calculated using the ensemble average of pressure data with the heat release calculated using the least squares method for pressure data. This paper propose a heat release computation method that can analyze the most correct, straight and simple method to analyse combustion phenomenon. In conclusion, we found that the least squares method of third-order was the best computational method for heat release calculation.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.4
• /
• pp.239-250
• /
• 2013

Context-aware mobile computing has become the primary approach to realize automatic, autonomous, and user-centric computing in the context of largely increasing the amount of mobile devices used that embed available sensors. However, designing an inference engine nonetheless requires the tasks of analyzing contexts, situations that can be inferred, etc. Moreover, a mobile device has limited resources and limited computation capability, which results in recognizing the common sense of its unsuitable environment for processing inference. Hence, we propose context-situation reasoning elements and their formal models in this paper, and we verify the formal models' applicability by applying them to an example. Finally, we design and implement an inference engine that realize the context-situation inference elements in computing environment, and we experiment an example by using the proposed inference engine to verify applicability and reusability of the inference engine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.78-83
• /
• 2003

General algorithm is developed for the prediction of internal flow-induced noise. This algorithm is based on the integral formula derived by using the General Green Function, Lighthills acoustic analogy and Curls extension of Lighthills. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve are compared with actual measurements. This illustrative computation shows that the current method permits generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.

• Journal of Korea Game Society
• /
• v.21 no.4
• /
• pp.109-116
• /
• 2021

In this paper, we considered that recently 3D game characters have been almost alike realistic expression because of a great mathematical computation and efficient techniques on GPU hardware. We presented the rendering technique and analysis for 3D game characters to simulate and render mathematical approach model from recent researches to perform the game engine for the surface reflection of lighting model. We compare our approach with the existing variant rendering techniques here using Open GL shader language on game engine. The experimental result will be provided the view-dependent visual appearance of variant and effective modeling characters for realistic expression using existing methods on the GPU for effective simulations and rendering process. Since there are many operations that are used redundantly while performing mathematical operations, the necessary functions and requirements have been to compute in advance.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.159-179
• /
• 2022

Often a network becomes complex, and multiple entities would get in charge of managing part of the whole network. An example is a utility grid. While the entire grid would go under a single utility company's responsibility, the network is often split into multiple subsections. Subsequently, each subsection would be given as the responsibility area to the corresponding sub-organization in the utility company. The issue of how to make subsystems of adequate size and minimum number of interconnections between subsystems becomes more critical, especially in real-time simulations. Because the computation capability limit of a single computation unit, regardless of whether it is a high-speed conventional CPU core or an FPGA computational engine, it comes with a maximum limit that can be completed within a given amount of execution time. The issue becomes worsened in real time simulation, in which the computation needs to be in precise synchronization with the real-world clock. When the subject of the computation allows for a longer execution time, i.e., a larger time step size, a larger portion of the network can be put on a computation unit. This translates into a larger margin of the difference between the worst and the best. In other words, even though the worst (or the largest) computational burden is orders of magnitude larger than the best (or the smallest) computational burden, all the necessary computation can still be completed within the given amount of time. However, the requirement of real-time makes the margin much smaller. In other words, the difference between the worst and the best should be as small as possible in order to ensure the even distribution of the computational load. Besides, data exchange/communication is essential in parallel computation, affecting the overall performance. However, the exchange of data takes time. Therefore, the corresponding consideration needs to be with the computational load distribution among multiple calculation units. If it turns out in a satisfactory way, such distribution will raise the possibility of completing the necessary computation in a given amount of time, which might come down in the level of microsecond order. This paper presents an effective way to split a given electrical network, according to multiple criteria, for the purpose of distributing the entire computational load into a set of even (or close to even) sized computational loads. Based on the proposed system splitting method, heavy computation burdens of large-scale electrical networks can be distributed to multiple calculation units, such as an RTDS real time simulator, achieving either more efficient usage of the calculation units, a reduction of the necessary size of the simulation time step, or both.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.425-426
• /
• 2002

Lineal and angular movements of many engine components make the lubricant absorb air and the aerated lubricant greatly influences the clearance performance of contacting behaviors of engine components such as big-end bearing, cam and tappet, etc. This study investigates the behaviors of aerated lubricant in the gap between con-rod bearing and proceeding which is one of the most frictional energy consuming components in the engine. Our assumption for the analysis of aerated lubricant film is that the film formation is influenced by the two major factors. One is the density characteristics of the lubricant due to the volume change of lubricant by absorbing the bubbles and the other is the viscosity characteristics of the lubricant due to the surface tension of the bubble in the lubricant. In our investigation, it is found that these two major factors surprisingly increase the load capacity in certain ranges of bubble sizes and densities. Frictional forces are also influenced by the aerated bubble size and density, which eventually enlarge the shear resistance due the surface tension, Modified Reynolds' equation is developed for the computation of fluid film pressure with the effects of aeration ratio under the dynamic loading condition. From the calculated load capacity by solving modified Reynolds' equation, proceeding locus is computed with Mobility method at each time step.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1986-1989
• /
• 2003

This paper proposes the information retrieval improvement for the Web using the structure and hyperlinks of HTML documents along with user profile. The method bases on the rationale that terms appearing in different structure of documents may have different significance in identifying the documents. The method partitions the occurrence of terms in a document collection into six classes according to the tags in which particular terms occurred (such as Title, H1-H6 and Anchor). We use genetic algorithm to determine class importance values and expand user query. We also use this value in similarity computation and update user profile. Then a genetic algorithm is used again to select some terms from user profile to expand the original query. Lastly, the search engine uses the expanded query for searching and the results of the search engine are scored by similarity values between each result and the user profile. Vector space model is used and the weighting schemes of traditional information retrieval were extended to include class importance values. The tested results show that precision is up to 81.5%.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.806-811
• /
• 2001

Since the characteristics of combustion and pollutant in Diesel engines were mainly effected by the characteristics of in-cylinder gas flow and fuel spray, an understanding of those was essential to the design of the D.I. Diesel engines. The improvement of volumetric efficiency of air charging into combustion chamber is a primary requirement to obtain better mean effective pressure of an engine. Since parameters such as the air resistances in intake and exhaust flow passages, valve lift and valve shape influence greatly to the volumetric efficiency, it is very important to investigate the flow characteristics of intake and exhaust port which develops air motion in the combustion chamber. In this study, two approach methods were used for design intake and exhaust port; experiment and computation which were made by using steady flow test rig and commercial CFD code. This paper presents the results of an experimental and analytical investigation of steady flow through the prototype cylinder head ports and valves of the HHI's H21/32 HIMSEN Engine.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.47-52
• /
• 2010

The proper surface pressure on the pistons rings in the diesel engine of a ship is very important, because the pressure controls the oil that is needed to maintain friction at acceptable levels between the pistons and the cylinders. In this paper, basic and theoretical concepts to compute the ring pressure were formulated and applied to obtain the proper surface pressures on selected sample piston rings. During the calculation of the pressure on the piston rings, the computation of the accurate free shape of the piston ring was required. Earlier, Arnold and Prescott introduced theories to compute the free shapes of piston rings, and their approach used rectangular and polar coordinates. In this paper, the free shapes of piston rings using two different theories were computed and compared. The results were quite close, representing the free shape of the piston ring. Ring pressure was computed using the Arnold's free shape that was obtained. A simple GUI was made to compute the surface pressure on the piston rings.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.887-893
• /
• 2010

Modelling methods of 3 phase induction motors dependant on a lot of parameters give much drawbacks and difficulties when making engine room simulators due to computation burden and the time required for acquiring detailed technical data corresponding to actual induction motors. This paper suggests a practical method by a equivalent circuit with minimized parameters and some formulas to configure induction motors which requires only data on the name plates of motors, while it revealed satisfactory modelling performances on the resultant curves which are plotted for the torque, load current and power consume according to slip variation.