• 설비공학논문집
• /
• 제18권2호
• /
• pp.163-171
• /
• 2006

In order to control multi-zone temperatures, a multi-type air-conditioning system may be used. In this study, control algorithms for the compressor and the electronic expansion valve of a multi-type air-conditioning system were developed by using fuzzy logics. The compressor control algorithm was composed of a compressor pressure setpoint algorithm, a compressor pressure setpoint reset algorithm, and a compressor frequency setpoint algorithm. The electronic expansion valve control algorithm was composed of an indoor temperature control algorithm, and a superheat control algorithm. These algorithms were applied to a multi-type air-conditioning system. Test showed good results for the control of a multi-type air-conditioning system.

• 설비공학논문집
• /
• 제13권8호
• /
• pp.780-786
• /
• 2001

For the compressor speed control of a multi-type air conditioning system, a fuzzy control algorithm was developed. The sum of zone temperature errors and its derivative were used as input variables, and the compressor speed was selected as the output variable. To test the effectiveness of the control algorithm, one outdoor environmental chamber and four indoor environmental chambers were used. In the chambers the zone temperature step change test and the indoor unit change over test were performed. Test results showed that, for the control of compressor speed, the fuzzy control algorithm was more effective than the conventional proportional control algorithm for the energy conservation.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.78-86
• /
• 1996

Vision sensor was used to track the weld line of the compressor case. The compressor case was fixed in jig equipped with the rotating system, and two torches having one degree of freedom was applied in automatic welding system. The radius of rotation for the compressor case is varying with each rotating angle, while, the angle velocity is constant Therefore, an algorithm to extract the feature of the compressor case for varying rotation angle is needed. To over come the avove difficulties, the curve fitting and composite curve were used. The experiment to verify the proposed algorithm showed desirable results for tracking the welding line of compressor case.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.65-70
• /
• 2018

This paper describes a effective information compressor algorithm for the fourth industrial technology. One of the difficult problems for outdoor is to obtain effective updating process of background images. Because input images generally contain the shadows of buildings, trees, moving clouds and other objects, they are changed by lapse of time and variation of illumination. They provide the lowering of performance for surveillance system under outdoor. In this paper, a effective information algorithm for variable environment variable under outdoor is proposed, which apply the Kalman Estimation Modeling and adaptive threshold on pixel level to separate foreground and background images from current input image. In results, the better SNR of about 3dB~5dB and about 10%~25% noise distribution rate in the proposed method. Furthermore, it was showed that the moving objects can be detected on various shadows under outdoor and better result Information.

• 전력전자학회논문지
• /
• 제22권3호
• /
• pp.256-262
• /
• 2017

This paper presents the control algorithm of a single-phase AC/DC/AC PWM converter for the linear compressor of a refrigerator. The AC/DC/AC converter consists of a full-bridge PWM converter for the control of the input power factor and a half-bridge PWM inverter for the control of the single-phase linear compressor. At the DC-link of this topology, two capacitors are connected in series. These DC-link voltages must be balanced for safe operation. Thus, a new control method of DC voltage balancing for the half-bridge PWM inverter is proposed. The balancing algorithm uses the Integral-Proportional controller and inserts the DC-offset current at the Proportional-Resonant current controller of the inverter to solve the DC-link unbalanced voltages between the two capacitors. The proposed algorithm can be easily implemented without much computation and additional hardware circuit. The usefulness of the proposed algorithm is verified through several experiments.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.189-194
• /
• 2017

An compressor that is combined with the rotor and pneumatic technology has been researching for the performance of pressure. However, the control of operations, an accurate diagnosis and the maintenance of compressor system are limited though the simple structure of compressor and compression are advantaged to reduce the energy. In this paper, the characteristic of the compressor operating under the normal or abnormal condition is realized. and the efficient diagnosis method is proposed through feature based analysis. Also, by using the GA (genetic algorithm) and SVM (support vector machine) of machine learning, the performance of feature analysis is conducted. Different misalignment mode of learning data for compressor is evaluated using the fault simulator. Therefore, feature based analysis is conducted considering misalignment mode of the compressor and the possibility of a diagnosis of misalignment is evaluated.

• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.398-405
• /
• 2016

A shape of loop-pipe in a compressor affects the vibration of compressor. In this paper, optimal design of shape of loop-pipe to decrease the stress was carried out. Body and shell were assumed to be rigid, while loop-pipe is considered to be flexible. The finite element model was derived and programmed. Genetic algorithm was used for optimization. Locations of 18 point in loop-pipe were considered as shape variables, while the shapes of loop-pipe were interpolated as polynomials or ellipses. Maximum stress of loop-pipe was used as a fitness function for optimization. The spatial constraints and acceleration response of shell were also considered in optimization. The maximum stress and acceleration could be reduced by 79 % and 49 % respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2196-2199
• /
• 2003

With the development of digital signal processor(DSP), digital pulse compressor (DPC) is commonly used in radar systems. A DPC is implemented by using finite impulse response(FIR) filter algorithm in time domain or fast Fourier transform(FFT) algorithm in frequency domain. This paper compares the computation complexity tot these two methods and calculates boundary Fm filter taps that determine which of the two methods is better based on computation amount. Also, it shows that the boundary FIR filter taps for DSP, ADSP21060, and those for computation complexity have similar characteristic.

• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.21-28
• /
• 2001

The effects of diffuser shapes on the flowfields of a small-size turbo-compressor have been investigated numerically and experimentally. The optimal design of elements shapes is important to develop the high efficiency turbo-compressor. Typical range of rotating speed for a small-size turbo-compressor is 40,000-70,000rpm. Numerical analyses were conducted to the rectangular and conical shapes of diffuser Three-dimensional, steady and viscous governing equations were solved by SIMPLE algorithm. To confirm the numerical results, the experimental measurements for the static pressure and temperature at the inlet and outlet boundaries were performed. Comparisons of these results were done, and the reasonable agreements were acquired.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.187-192
• /
• 2000

The effects of diffuser shapes on the flowfields of a small-size turbo-compressor have been investigated by numerically and experimentally. It is important to optimal design of each elements for developing the small-size turbo-compressor Typical range of rotating speed of a small-size turbo-compressor is 40,000-70,000rpm. Numerical analyses are conducted to the rectangular and conical shapes of diffusers. Three-dimensional, steady, viscous governing equations are solved by SIMPLE algorithm. To prove the numerical results, experimental studies for the measurements of static pressure and temperature at the inlet and outlet boundaries are performed. Comparisons of these results are executed, and reasonable agreements are acquired.