• Elastomers and Composites
• /
• 제39권3호
• /
• pp.186-192
• /
• 2004

신발중창용으로 사용되는 IP, PH 그리고 PU 발포체의 경도가 발포체의 압축응력, 회복 응력, 압축저장에너지, 압축손실에너지 등에 미치는 영양을 고찰하였다. 발포체의 종류에 무관하게 경도의 증가에 따라 발포체의 압축력, 압축 회복력, 압축 에너지 손실률, 반발탄성률, 굴곡력은 높은 값을 나타내었다. 압축력, 압축에너지 손실율은 IP 발포체의 경우 가장 높은 값을 나타내었으며, 회복력과 압축에너지 저장율은 PU 발포체가 높게 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.13-15
• /
• 2001

Compression test has been used to measure material flow stress due to limited capability of tensile test at the fast strain rate. Since the frictional stress unavoidable during compression test should be properly eliminated from the measured stress, calibration of the measured stress by using friction factor has been made for the flow stress measurement. Also, calibrated stresses by interrupted and continuous compression tests have been compared with the true stress measured by tensile test at $0.2\%$ carbon steel.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.70-81
• /
• 1996

Solutions of geotechnical engineering problems require predictions of deformation and stresses during various stages of loading. Powerful numerical methods are available to make such predictions even for complicated problems. To get accurate results, realistic stress-strain relationships of soils are dependent on a number of factors such as soil type, density, stress level and stress path. Attempts are continuously being made to develope analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate stress-strain and volume change characteristics of Lade's single work hardening model dependant on the stress path. In order to predicted of stress-strain and volumetric strain behavior were determined the values of parameters for the mode by the computer program based on the regression analysis. Predicted stress-strain behavior of triaxial compression tests and optional stress path tests for increasing confining pressure with parameters obtained conventional triaxial compression tests agreed with several test results but the prediction results for decreasing confining pressure reduced triaxial compression tests make a little difference with test results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.233-244
• /
• 2001

Stress-strain behaviour of soil varies based on stress path and stress history. There has been few study on the characteristics of yielding curve which has anisotropic compression stress history in decomposed granite soil. During this study, various stress path tests in previous anisotropic compression stress history are performed on compacted decomposed granite soil sampled at Iksan, Chonbuk. Yielding points are determined from various stress-strain curves (${\eta}-{\varepsilon}$, ${\eta}$-v, and ${\eta}$-k, ${\eta}$-W curves). Stress-strain curve is certified which shows yielding point very clearly. The shape and characteristics of anisotropic compression yielding curves are examined. The main results are summarized as follows : 1) p' constant and compressive direction in stress paths, which has experienced previous anisotropic compression stress history, shows relatively dear yielding points. 2) Yielding curves defined from ${\eta}$-k and ${\eta}$-W curve show almost perfect ellipse. 3) Directions of plastic strain incremental vector($dv^p/d{\varepsilon}^p$) are not perpendicular to yielding curve.

• 음성과학
• /
• 제9권4호
• /
• pp.165-173
• /
• 2002

Strong compression effects in a stressed vowel due to the addition of syllables have been adopted as evidence for stress-timing. In relation to this, Yun (2002) investigated the compression effects of number of syllables on Korean vowel. The results generally revealed that Korean had neither significant nor consistent anticipatory or backwards compression effects, especially when it came to the sentence level. This led us to claim that Korean would not be a stress-timed language. But the language investigated in the study was only Korean, and further cross-linguistic research was needed to confirm the claim. In this study, Yun's (2002) sentence level data are compared with Fowler's (1981) English data. The comparison reveals that Korean seems to be similar to English in the backwards compression effect, whereas the two languages are markedly different in the anticipatory compression effect. Thus, if English is a stress-timed language and the strong anticipatory compression effect is evidence in favour of stress-timing as is claimed, the present cross-linguistic study confirms Yun's (2002) suggestion-Korean is unlikely to be stress-timed. On the other hand, compression effects are revisited: the differences in vowel compression between English and Korean are discussed from the syntactic and phonological points of view.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.95-104
• /
• 2003

The material properties of rubber was determined by the experiments of uniaxial tension, uniaxial compression, planer tension, equi-biaxial tension and volumetric compression. In compression test, it is difficult to obtain the pure state of compression stress and strain due to friction force between the specimen and compression platen. In this study, the stress and strain data from the equi-biaxial tension test were converted to compression stress and strain and compared to a pure state of simple compression data when friction was zero. The compression test device with the tapered platen was proposed to overcome the effect of friction. It was fumed out that the relationship of the stress and strain using the tapered platen was in close agreement with the pure compressive state.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.425-430
• /
• 2003

The material properties of rubber was determined by the experiments of uniaxial tension, uniaxial compression, planer tension, equi-biaxial tension and volumetric compression. In compression test, it is difficult to obtain the pure state of compression stress and strain due to friction force between the specimen and compression platen. In this study, the stress and strain data from the equi-biaxial tension test were converted to compression stress and strain and compared to a perfect state of simple compression data when friction was zero. The compression test device with the tapered platen was proposed to overcome the effect of friction. It was turned out that the relationship of the stress and strain using the tapered platen was in close agreement with the pure compressive state.

• 음성과학
• /
• 제9권1호
• /
• pp.173-184
• /
• 2002

The question of Korean rhythmic type is still a controversial issue (syllable-timed; stress-timed; word-timed). As a step toward solving the question, an experiment was carried out to examine compression effects in Korean. There has been a general belief that the increase of the number of following or preceding syllables causes compression of a vowel (or syllable) in many languages, and a marked anticipatory compression effect can be especially indicative of stress timing. The purpose of this research, therefore, was to obtain some evidence to determine whether or not Korean is stress-timed. The durations of the target vowel/a/ of the monosyllabic word /pap/ were measured at both word and sentence level. In general, marked anticipatory and backward compression effects on the target vowel were observed across one-, two- and three-syllable words in citation form, whereas the effects were neither marked nor consistent at sentence level. These results led us to claim that Korean is not stress-timed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.921-926
• /
• 2001

In this paper the biaxial failure criteria and stress-strain response for plain concrete are studied under uniaxial and biaxial stress(compression-compression, compression-tension, and tension-tension combined stress). The concrete specimens of a square plate type are used for uniaxial and biaxial loading. The experimental data indicate that the strength of concrete under biaxial compression, f2/fl=-l/-1, is 17 percent larger than under uniaxial compression and the poisson's ratio of concrete is 0.1745. On the base of the results, a biaxial failure envelope for plain concrete that the uniaxial strength is 398kgf/$cm^{2}$ are developed. The biaxial failure behaviors for three biaxial loading areas are also plotted respectively. In addition, the characteristics of stress-strain response under biaxial compression are compared and verified with the experimental and analytical results.