• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.511-529
• /
• 2023

This paper aims to better understand the bonding behavior in Reinforced Concrete beams strengthened with an Ultra-High Performance Fiber Reinforced Concrete (RCUHPFRC) layer on the compression side using experimental tests and numerical analyses. The UHPFRC mix design was obtained through an optimization procedure, and the characterization of the materials included compression and slant shear tests. Flexural tests were carried out in RC beams and RC-UHPFRC beams. The tests demonstrated a debonding of the UHPFRC layer. In addition, 3D finite element analyses were carried out in the Abaqus CAE program, in which the interface is modeled considering a zero-thickness cohesive-contact approach. The cohesive parameters are investigated, aiming to calibrate the numerical models, and a sensitivity analysis is performed to check the reliability of the assumed cohesive parameters and the mesh size. Finally, the experimental and numerical values are compared, showing a good approximation for both the RC beams and the RC strengthened beams.

• Journal of Acupuncture Research
• /
• 제41권1호
• /
• pp.1-16
• /
• 2024

This review examined and analyzed clinical research trends in the treatment of compression fractures in traditional Korean medicine using case studies. Accordingly, 5 web databases were searched using relevant Korean and English terms. Based on predefined exclusion and inclusion criteria, 16 case studies were selected, analyzed, and classified according to the journal, publication year, participants, chief complaints, affected vertebrae, treatment and evaluation methods, and improvement. The case studies reported various treatment methods, including acupuncture, herbal medicine, physical therapy, cupping, moxibustion, and band training. All 16 case studies reported the use of combination therapy. All 23 cases reported in these case studies demonstrated improvement in chief complaints, and none reported any side effects.

• 대한방사선기술학회지:방사선기술과학
• /
• 제31권3호
• /
• pp.267-276
• /
• 2008

본 연구는 20세에서 50세까지 건강한 남성 지원자를 대상으로 내경동맥과 내경정맥의 혈류속도를 측정하기 위하여 2D-PC MRA를 촬영했다. 2D-PC MRA는 제4-5경추디스크를 지나는 FOV 24cm 넓이로 횡단 촬영하여 내경동맥과 내경정맥의 혈류속도를 넥타이를 매지 않은 상태와 세게 맨 상태에서 각각 측정하였다. 넥타이를 매지 않았을 때 내경동맥의 평균 혈류속도 최고치는 우측 72.13cm/sec, 좌측 74.96cm/sec (양측 평균 73.54cm/sec)이였고 내경정맥의 평균 혈류속도 최고치는 우측 -34.45cm/sec, 좌측 -24.99cm/sec(양측평균 -29.72cm/sec)였다. 그러나 넥타이를 세게 매었을 때 내경동맥의 평균 혈류속도 최고치는 우측 61.35cm/sec, 좌측 65.19cm/sec(양측 평균 63.27cm/sec)이며 내경정맥의 혈류속도 최고치는 우측 -22.14cm/sec, 좌측 -17.93cm/sec (양측 평균 20.03cm/sec)였다. 목에 세게 넥타이를 맨 경우가 넥타이를 매지 않은 상태 보다 양쪽 내경동맥의 평균 혈류속도가 86% (63.27/73.54cm/sec)로 약간 감소하는 반면 양쪽 내경정맥의 평균 혈류속도는 67%(-20.03/-29.72cm/sec)로 유의성 있게 감소하였다(P<0.05). 따라서 넥타이를 세게 매었을 때 내경정맥의 순환에 미치는 영향(33%의 혈류속도감소)이 내경동맥(14%의 혈류속도감소) 보다 유의성 있게 큰 것을 알 수 있었다(P<0.05). 결론적으로 본 연구결과는 2D-PC MRA를 이용하여 넥타이를 목에 세게 매었을 때 순간적으로 양쪽 내경정맥이 내경동맥보다 상대적으로 압박되어 혈류속도가 의미 있게 감소되며 일시적 폐쇄가 되는 소견을 보였다. 이 경우 넥타이를 목에 세게 매고 생활을 하는 경우에 대변을 보거나 또는 세면을 하는 등 일상적인 생활에서도 예기치 않게 일시적으로 내경정맥혈관이 압박되어 폐쇄되며 이차적으로 두개강 내의 정맥성고혈압을 일으켜 뇌졸중의 요인이 될 수 있는 것으로 유추된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.73-76
• /
• 2001

We propose a new method for image coding that it is based on highly related property between a spatial image and wavelet transform image. The characteristics have an important role in the design of proposed algorithm. This algorithm for image coding is to obtain high compression rate at low bit rate. The other side, the high activity regions are related to significant coefficients which give much influence to image reconstruction, because they mean the important factor to represent the appearance of images such as edge or boundary. For some images with low activity, we can obtain the reconstructed image with near to 30 dB at 150: 1 compression ratio.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.12-18
• /
• 2000

If optimum design technique is applied in the design of packaging container for bulk materials, merits on the side of not only economic and compression performance but distribution efficiency are expected. In this study, on the ground of the optimum models for required board area and compression strength performance, optimum design program having faculties of outward and inward optimum design and information design was developed. This program was composed of input module, output module, database and management module, and calculation module. Though the packaging specifications ars same, requied board area, board composition and cost of container were greatly different according to exterior packaging conditions. Also, about 12% in weight of container was lighter, and about $13{\sim}17%$ in cost of container was reduced when the program was applied for 2 kinds of bulk materials.

• 소성∙가공
• /
• 제18권4호
• /
• pp.304-309
• /
• 2009

Quenchable boron steel is a new type of high strength steel to reduce the weight of automobiles and maintain the safety conditions. Quenchable blanks can be hot-stamped and hardened in a water-cooled tool to achieve high strength. In this paper, new alloy for hot stamping is designed based on requirement of mechanical properties and two types of surface coating are investigated in viewpoints of oxidization and exfoliation. An automotive part of center pillar is manufactured by hot-stamping using Al-Si coated sheet. The performance of developed part is compared by static compression test and side impact crash test.

• Journal of Korean Neurosurgical Society
• /
• 제45권5호
• /
• pp.309-311
• /
• 2009

Cervical cord compression due to osteochondroma in hereditary multiple exostosis (HME) is a rare condition, especially in young children. In this report, we discuss a rare case of cervical osteochondroma presenting as Brown-Sequard syndrome (BSS) in a 7-year-old boy with HME. The child was admitted because of hemiparesis involving the right limbs and hypoesthesia on the left side following mild trauma. MR image revealed cord compression by osteochondroma of the C7 lamina. We removed the osteocondroma and the neurological deficit was improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.323-323
• /
• 2000

In the tandem cold wiling mill, the quality is very in portant, and requirements for thickness accuracy become more strict. However, the mathematical model for prediction of rolling force was not considered an elastic deformation at the entry and delivery side of the contacted area between the worked roll and rolling strip so that there was so difficult to control of the thickness. To overcome this problem, the mathematical model included an elastic deformation of strip has been developed and applied to the field in order to predict the rolling force. The simulated results showed that the end of elastic recovery should be included the model, even if the effect of elastic compression was not important.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.1-8
• /
• 1995

This work presents a new method to deal with buckling constraints. The mathematical optimization process of truss structures proposed earlier by the author has been proved to be the most rigorous method. The inclusion of buckling constraints, however, gives rise to a new problem The allowable compression stress of a member changes from one design iteration to another. This changing stress limit creates a good deal of noise in selecting active constraints and makes the solution process unstable. This problem can be overcome by introducing relaxation parameters. This work, however, aims at establishing a more rigorous method by containing the allowable compression stress in the left hand side of the associated constraint.

• Journal of Chest Surgery
• /
• 제49권1호
• /
• pp.59-62
• /
• 2016

A 12-month-old boy was diagnosed with agenesis of the right lung. Mediastinal deviation progressed to the diseased side as the patient matured; therefore, tracheal distortion developed. As a result, tracheal compression developed between the vertebral body and aorta. The patient was repeatedly admitted to the hospital because of recurrent pulmonary infection and combined severe respiratory distress. Diaphragm translocation was performed to treat the patient. The postoperative course was favorable, and computed tomography scan findings and symptoms had improved at 1 year after surgery.